Repair and Renovation to New Teaching Hospital of PRMMCH at Baripada in the District of Mayurbhanj for the year 2025-26

Dismantling and removing false celling including removal of frame,hinges,fastenings and stacking the useful materials for reuse and removing the debris within 50m lead.

Supply and Installation of wall panelling with Anutone 10 mm thick Tufbloc magnesium oxide HDFR boards of size 1200 x 2400mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK , Strength – Anti Sag , Climate ( degree Centigrade , RH - 50,95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone/ Sgaapl /Uno Panel are to be fixed with Philips head screws on the cross channel CC 25 size 35 x 20 x 63 mm . The metal framework is to erected on the wall with the help of perimeter channel WC 25 (20 x 25 x 30 mm) on the bottom & ceiling level. Now insert the Cross Channel CC25 inside the perimeter channel at an interval of 600 mm C/C vertically /horizontally with support of main channel Main Channel 45 mm s. .

Supply and Installation of 15 mm glassfiber steppe edge Glass fibre core ceiling tile of size 595 x 595 x 15mm having all edges encapsulated with chemical treated paint & having density 100-120 Kgs/ m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick and 15 mm wide pre coated metal T15/24 grid system. The technical parameters are as follows :Core - Glassfibre, Fire – Class 1 & P , Acoustics – NRC 0.95,Climate (OC RH) – 40, 95,Termite resistance ,Light reflectance – 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. The T15/24 Grid system of 600 x 600 mm module shall include wall angle(WA15) with unequal flanges of size 14 x 20 x3000mm wide, length 3000mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main T15(MT15W36) having flange width 15mm /24 mm , height 32/38 mm and length 3600mm thickness 0.30 mm from the soffit with help of soffit cleat and wire at 1200mm c/c. Cross T15 (CT15W12) with flange width 15 mm, height 32 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15.

S/R-2006/Other Building Item No.6 & page no 239:- Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick prelaminated board (Nova pan make) and jointing angle No 1855 etc.complete as directed by the Engineer-in-charge.

Supplying, fitting, fixing up Wardrobe made up 18mm WPC of Crystal thermotech limited (Crystal Hybrido) covered with 1mm Laminate (Sunmica) including Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-Charge.

Providing & fixing of wall paneling made out of WPC of Crystal thermotech limited (Crystal Hybrido) frame 18mm thick strip of 50mm width @ 300mm C/C vertically and fixing of 12mm thick WPC as pannel fixed with screw and top face including cost, conveyance of all materials and labour, T&P etc. complete as per direction of Engineer-in-Charge.

Supplying, Fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sun mica on both side of approved design and quality including cost of all door fitting and fixtures etc. complete

Providing, supplying and fixing flame-retardant quality hospital cubicle curtains / bed divider privacy curtains made of approved medical-grade fabric, machine washable, fire-resistant, complete with mesh top and rust-proof grommets, including all fittings, accessories, labour, loading, unloading and fixing in position as directed by the Engineer-in-Charge.

Supplying and fixing of Roller blinds by fixing powder coated to channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.

Supplying ,fitting and fixing of office Table , camputer Table made out by of 19mm B.W.R. Ply wood and 2mm thick centuri sunmica of approaved make on side , middle, Top and front side wall with foot rest and computer key board draw including cost, conveyance taxes of all fitting and materials cost of all labour T&P etc complete as per direction of Engineer-In- Charge.