Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC TENDER FOUND LOWEST AND REASONABLE HENCE ACCEPTED | |
| 2 | L2₹39.4 L+₹1.5 L (3.98%)Rejected-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-AOC NOT LOWEST |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
15 Aug 2023, 6:00 pmClosed
TA YASHODA
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
REPAIRS TO KITCHEN BY USING SEMI MODULAR TYPE, ROOF TREATMENT USING LIQUID MEMBRANE AND EXTERNAL WEATHER PROOF PAINT USING MECHANICAL SPRAY GUN AT OFFRS MD ACCN (3 BLOCKS 4 ACCNS) UNDER AGE B/R (SOUTH) NO I OF GE (SOUTH) SECBAD
2023_MES_607151_1
GE(S)/SEC/TOKEN-34 OF 2023-24
Open Tender
Civil Works
Item Wise
240 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GE SOUTH, MUDFORT, SECUNDERABAD
₹96,000
Yes
15 Sept 2023
30 Jun 2023
17 Aug 2023
30 Jun 2023
15 Aug 2023
28 Jul 2023
30 Jun 2023 - 27 Jul 2023
Amount
Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and as directed.
Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed.
Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles of size 450x300x6 to 7 mm thick wall tiles set and jointed in neat cement slurry and pointed in white/coloured cement to match with the colour of tile over 10 mm thick backing coat in CM 1:4 as in skirting / dados etc, complete all as specified and as directed..
M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
S&F in repairs 18 mm thick plywood BWR type fixed with screws to timber framework complete all as specified and as directed..
M&L for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and as directed.
S&F 200 mm long stainless steel decorative handle fixed with screws complete all as specified .
S&F for 200 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified and as directed.
S&F SS telescopic type ball bearing drawer channel of load bearing capacity of not exceeding 45 kg anti-rebound function, manufactured by high grade steel for longevity for easy removable of drawer zinc plated for corrosion resistant suitable for the SS kitchen basket of size not exceeding 500mm complete all as specified and as directed..
S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x4" complete all as specified and direceted.
S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x6" complete all as specified and direceted. Make- 1st quality of SLEEK/HETTICH/EBCO
S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x8" complete all as specified and as direceted. Make- 1st quality of SLEEK/HETTICH/EBCO
S&F for stainless steel dust bin holder 10 " dia complete all as specified and as direcetd Make- 1st quality of SLEEK/HETTICH/EBCO.
S&F for stainless steel bottle pullout corrosion resistant, rust free seamless glossy finish, high quality product of 18 guage SS 304 grading of size 106 mm X 476 mm X 130 mm complete all as specified and as directed. Make- 1st quality of SLEEK/HETTICH/EBCO
M&L for granite slab flooring 20 to 25 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone indluding cutting and polishing including making hole in platform for gas pipe including edge moulding and adhesive etc. complete all as specified and as directed.
S&F in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified and as directed. Make : Cat No-FLR-5347N of Jaquar or equivalent make as specified here in after.
S&F in repairs stainless steel sink with draining board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 915 X 460mm bowl size 410mm X 330mm X160mm complete all as specified and as directed..
S&F in repairs stainless steel plate rack of size 31" X 36" X 10 " complete all as specified and as directed. Cat No-P-348 of Prayag or equivalent make as given in approved names for product in PS .
S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed.
S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.
S&F in repairs stop valves, cp brass, chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.
M&L for remove the Existing Treatment totally and clean the surface throughly then check any structural defects or Cracks. Cracks above 3mm ,will be Treated with “V” Groove. Clean the cracks & apply SBR LATEX With Cement, level the cracks to the surface and prime the surface with ShaliUrethane BTD @ 400 grms m2 / kg i.e the Ratio of 1:1 ( BTD : Water) and allow it to touch dry. Apply 1 st coat of ShaliUrethane® BTD @1.2 kg per m2 by brush / roller while the primed surface is tacky. . Apply 2 nd coat of ShaliUrethane® BTD @1.2@kg per m2 by brush / roller. Allow 1st coat to dry for 10 – 12 hr. Extend waterproofing treatment up to 200 mm and terminate into groove on the parapet wall. Fill the groove with PMC mortar complete all as specified and as per manufactures instructions..
Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and as directed
M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in padding (level course) on roof complete all as specified and as directed.
M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.
M&L for water proofing treatment with APP based standard membrane over PCC padding in approachable roof with the following courses of treatment : (a) Apply bituminous primer (IS3384) @ 0.30 Kg/Sqm of the surface area including cleaning the surface complete all as specified . (b) Apply APP plastomeric bitumen based water proofing membrane polyster reinforced (3.50 Kg/Sqm) with 10 cm overlaps and torch bonded at joints including surface preparation before and after application of treatment as per manufacturers instruction complete all as specified and as directed.
Supply only water proofing compound complete all as specified and as directed.
M&L for M&L for cement concrete tiles 25cm x 25cmx22mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut polished with grey cement and no pigment over 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA or equivalent of Berger/Nerolac) over two coat putty over a coat of primer upto two storeys of building height including filiing all crack with approved crack filler complete all as specified and as directed.. (Note : Two coat of APPEX will be applied through by Mechanically spray gun method)
M&L for complete removal of existing treatment (using removal machine) including preparing surfaces of ceiling and applying two coats of weather proof exterior emulsion paint ((APEX ULTIMA or equivalent of Berger/Nerolac) over two coat putty over a coat of primer upto two storeys of building height including filiing all crack with approved crack filler complete all as specified and as directed.. (Note : Two coat of APPEX will be applied through by Mechanically spray gun method)
Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement including
M&L for preparing surfaces of new surface of wall and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA or equivalent of Berger/Nerolac) over two coat putty over a coat of primer upto two storeys of building height including filiing all crack with approved crack filler complete all as specified and as directed.. (Note : Two coat of APPEX will be applied through by Mechanically spray gun method)
SAI RUPA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .