PROVN OF SPECIAL REPAIR OF BLDG NO TBCD 37 38 39 40 OR BATHROOM AT MIL STN BIKANER

Amount

Dismantling Asbestos cement Corrugated sheets in roof covering including ridges .

Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down shutter exc 1 sqm and n exc 2 sqm each and refixing in the same opening after rescuring or easing & adjustment all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Demolition of brick/stone masonry built in CM. all as specified.

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position.

Dismantling water tanks and removing to store exc 500 ltrs and nexc 1000 ltrs

M&L brick work with fly ash bricks old sized ,straight or curved on plan to any radius built in CM 1:6 all as specified and directed.

M&L half brick work with fly ash bricks old sized ,straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified.

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface mplete all as specified.

M&L for Rendering 15 mm thick in two layers (10 + 5 mm )on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for providing cement concrete 1:3:6 type C-0 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

Supply and fixing of 100 mm But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

S&F steel locking bolts with mils steel electrogalvanised plate and bright bolt ont less than 10 mm dia and 100 mm size, complete all as specified .

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.

M&L 150mm Mild steel pressed handles, oval type, stove enamelled black

M&L 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F for 150mm size Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed all as specified and directed.

S&F factory made mild pressed steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided

S&F factory made mild pressed steel Ventilator box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture1.18mm

M&L plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete such as sunken floors

M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M&L for pre painted galvalume aluminium zinc cozting GI based corrugated steel Sheet high rib profile tile pattern color coated 0.5 mm thick of 550 Mpa Tensile strength sheets as in roof covering and fixed as per manufacturers instruction (design as app by Engg in charge complete all as spfd ) Make:- TATA /JSW .

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) two layered . ISI marked hoisted and fixed in position all as specified in SSR Part-I, 450 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut com

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F Vitreous China Squatting pan `Orissa pattern` size 550x440mm including integral foot rest, incl P or S trap comp all as specified and fixed in repairs.

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe all as specified.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified.

S & F in repair Viterous China urinal half stall type white including CP spreader, waste pipe etc.

S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spfd.

S&F in repair chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia

S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm

S&F in repair fancy type chromium plated stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified

S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe

S&F in repair Towel ring of PTMT with and incl chromium plated brass screws and wooden /plastic cleats

S&F in repair 32 mm size cp waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe

S&F in repair stainless steel peg set of 6 peg foldable or fixed complete all as specified & directed by Engineer-in-charge

S&F in repair soap dish Make Jaquar/ cera or eqivalent

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 50mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F cast iron vent cowl for 50 m dia pipe. all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets/T 100mm bore fitted with oval access door. all as specified.(Larger bore measured)

S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets 75mm bore fitted with oval access door all as specified..(Larger bore measured)

S&F 75 mm bore CI floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 50mm bore pipe

S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified.

M&L for three coats of white wash on walls old plastered surfaces

M&L for three coats of white wash on walls new plastered surfaces

M&L two coats of cement cement base paint over a coat of primer as per manufacturer's instructions on walls including preparation on new surfaces complete all as specified and directed. .

M&L two coats of cement cement base paint on walls including preparation on old surfaces complete all as specified and directed. .

Demolition of brick masonry built in CM. all as specified and the item credited from the demolilition is used to filling the manhole area and levelled to the surrounding area.

Excavation in trenches n exc 10Sqm on plan n exc 1.5 m deep and n exc 1.5 m wide , getting out in any type of soil.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point.

M&L for PCC 1:4:8,type D-2 using 40mm graded crushed stone aggregate as in sub base and mass conc.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides of pipes after they are laid and tested for.

S&F salt glazed stone ware drain pipe class SP3 confirming to IS-651 , 150mm bore in trenches and jointed as spfd

M&L brick work in cement mortar (1:4) using old size sub class 'B' bricks in walling, straight or curved on plan exc 6m mean radius all as specified.

M&L rendering 15mm thick in cm 1:4 concrete walls or stone masonary walls surfaces as in wall finishes even andsmooth w/o using extra cement incl mixing of wpc .(Note: WPC shall be measured and paid for seperately)

M&L PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work

M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar1:4.(Note : Slab covers shall be floated with surface vibrator,and over turfed base ,arrandement for turfed base has to be from contractors side)

M&L for mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc

Supply only integral water proofing compound

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc complete all as specified and as directed by the Engr-in-Charge.

Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.

Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 91 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 91 here-in-before but socket point on indpendent board complete as specifed as directed by Engineer - In - Charge

All as per item No 91 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge

S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Socket outlet 2 in 1, flush type, 3 pin, 5 Amps, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F Lamp holder insulated body with back plate for conduit/casing capping fittings complete all as specified and as directed by Engineer-in-Charge Make CG/Havells/Phillips.

S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F bulk head luminaries LED Type 9 W , complete all as specified and directed .Make C.G /surya / Bajaj/CG

S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring).

S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18 Watt complete all as specified and directed by engineer-in-charge.Make SYSKA/BAJAJ/PHILIPS/C.G/wipro

Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / Schneider / ABB/ Havells

S&F MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / Schneider / ABB/ Havells

S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make : Legrand / Schneider / ABB/ Havells

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2 core

Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge.

Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning.

M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I.

vipul construction company

JAGDAMBA CONSTRUCTION COMPANY

durga construction company

SHREE GURU NANAK CONSTRUCTION COMPANY

Beenu Co. Company