Karnataka

Active

Works

Other Works

ELECTRICAL WORK FOR 3 TPD MRF Shed at SWM Site

Directorate Of Municipal Administration

DMA Town Municipal Council Aurad | Kalaburagi, Karnataka

Amount: ₹2.1 LCloses: 6 Jul 2026

Tender Value

₹2.1 L

EMD Value

₹3,165

Closing Date

6 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Directorate of Municipal Administration

Work Description

ELECTRICAL WORK FOR 3 TPD MRF Shed at SWM Site

Tender Information

Tender ID

301008

Reference Number

DMA/2025-26/OW/WORK_INDENT54614

Tender Type

Open

Product Category

Other Works

Location

DMA Town Municipal Council Aurad

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredValid Contractor License PWD Class-IV& Above Contractor Certificate

RequiredAchieved in at least two financial years a minimum financial turnover of Rs.4.9 Lakhs last five years i.e.,2021-22 to 2025-26

RequiredSatisfactory completed, at least one similar Nature of work such as Electrical work of value not less than Rs. 1.25 Lakhs as prime contractor. last five years i.e., 2021-22 to 2025-26 Work Done certificate with E-procurement Indent number and issued by the officer not below the rank of Executive Engineer or Equivalent in govt. entities

RequiredOne Similar nature of Work Electrical work

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Technical Criteria

Past Experience

Satisfactory completed, at least one similar Nature of work such as Electrical work of value not less than Rs. 1.25 Lakhs as prime contractor. (last five years i.e., 2021-22 to 2025-26) (Work Done certificate with E-procurement Indent number and issued by the officer not below the rank of Executive Engineer or Equivalent in govt. entities)

Work Done Certificate

Capabilities of Vendor

Valid Contractor License PWD Class-IV& Above Contractor Certificate

PWD Registration Certificate (Class I/II/III/IV)

One Similar nature of Work Electrical work

Satisfactory Performance Certificate

Financial Status

Achieved in at least two financial years a minimum financial turnover of Rs. 4.9Lakhs (last five years i.e., 2021-22 to 2025-26)

Audited CA Certificate of Annual Turnover

Banker Details

GST Registration

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹3,165

Important Dates

Last Activity

20 Jun 2026

Published

20 Jun 2026

Bid Opening

7 Jul 2026

Download Ends

4 Jul 2026

BOQ Preview

•

ELECTRICAL WORK FOR 3 TPD MRF Shed at SWM Site

•

LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished fr...

•

Sub panel-1 Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required Market price 63A 4 Wire 16kA 415V Aluminium busbars ompartment.Outgoings: 40/63A 4P MCB feeder-...

•

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. 3.5Cx50 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx25 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx16 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx16 Sqmm Al Ar cable 4Cx10 Sqmm Cu Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx6.0 Sqmm Cu Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class 3Cx6.0 Sqmm Cu Un Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3Cx4.0 Sqmm Cu Un Ar cable

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned copper lug) 70 Sqmm Al Ar cable (tinned copper lug)25 Sqmm Al Ar cable (tinned copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned 25 Sqmm Al Ar cable (tinned copper lug copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.16 Sqmm Al Ar cable (tinned copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.10 Sqmm Cu Ar cable (tinned copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.6.0 Sqmm Cu Ar cable (tinned copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.6.0 Sqmm Cu Un Ar cable (tinned copper lug)

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.4.0 Sqmm Cu Un Ar cable (tinned copper lug)

•

PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall...

•

25mm dia PVC 2mm thick conduit,32mm dia PVC 2mm thick conduit 40mm dia PVC 2mm thick conduit,CSR Electrical SR-2022-23, ITEM NO:1.1.4 ,CH-1, PAGE NO-1

•

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

•

1 Light point above 3M upto 6Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.2 ,CH-1, PAGE NO-3

•

1 Light point above 6M upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.3 ,CH-1, PAGE NO-3

•

2 Light point above 3Mtr upto 6Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.4 ,CH-1, PAGE NO-3

•

2 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.4 ,CH-1, PAGE NO-3

•

3 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.5 ,CH-1, PAGE NO-3

•

Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit. 1.0 Sqmm Cu...

•

1.5 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.2 ,CH-1, PAGE NO-3

•

2.5 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.3 ,CH-1, PAGE NO-3

•

4.0 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.4 ,CH-1, PAGE NO-3

•

6.0 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.4 ,CH-1, PAGE NO-3

•

Switches & sockets outlets in Existing modular box,6A one way switch CSR Electrical SR-2022-23, ITEM NO:3.6.1 ,CH-3, PAGE NO-5

•

6A 5Pin socket CSR Electrical SR-2022-23, ITEM NO:3.6.3 ,CH-3, PAGE NO-5

•

Stepped fan regulator CSR Electrical SR-2022-23, ITEM NO:3.6.4 ,CH-3, PAGE NO-5

•

6/16A Universal socket CSR Electrical SR-2022-23, ITEM NO:3.6.11 ,CH-3, PAGE NO-5

•

Light fixture Supply & fixing of 50W LED light fixture IP 65, included screws accessoris Etc.Considered outdoor type light fitting for equivalent. CSR Electrical SR-2022-23, ITEM NO:11.9.1, PAGE NO-37

•

Earthing 25x6mm GI Earth Strip

•

8.0 SWG GI bare wire

•

Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall. Supply & installation of GI Lad...

•

Pipe earthing Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1 MRF ele.doc

Tender Document • 1.07 MB

Ready to Participate?

Download all tender documents and submit your bid