Selection of Firm for Execution of Museum at Jyotisar, Kurukshetra, Haryana including Operation and Maintenance for five years

Amount

Curation of Visual Content with 50:50 ratio of 3D and Motion Graphics in 4k resolution . 3D Animation would include Assets , backgrounds, Fx , Environments , Layouts & Rendeing . Motion Graphics Animation/Composition would include Parallax, Matte Paints , Environment , vector Graphics etc

Curation of Audio content with, narration , songs & chants with voice of male and female artists with min 10 year of expereince ( non celebrity ) as per tender specs .It includes SFX , BGM , final mix and Foly.

Branding & Marketting of Museum as per details/specification/scope of work enclosed in Section 3.1

Providing and fixing 600mm x 1200mm acousitc ceiling 20mm thick with 0.9 NRC in all blocks with appropriate frame work in aluminum section of size 38mm by 38mm and 12 mm gauge at ceiling level. Item to include all material, labour, scafolding and carriage in all leads, scaffolding and lifts complete. Basic Rate = Rs 190/- per sqft

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I (HSR Item Code 9.46.5)

Providing and fixing 1200 mm dia (maximum) coulumn fabricated in 3-4mm thick Fiber Glass OR High densityy Styrofoam coated and hardened with resin, inspired from Hoysaleshwara Temple, covering existing 750mm x 750mm RCC columns to be finished in sandstone paint as per approved sample. Columns shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. The fiber work to be supported by MS structure duly painted and secured to the RCC structure with mechanical fastners. The installation shall adhere to all structural stability and public safety. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed. The agency is expected to provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 900 mm dia (maximum) column fabricated 3-4mm thick Fiber Glass OR High densityy Styrofoam coated and hardened with resin, inspired from Indian Temple Architecture, covering existing 750mm x 750mm RCC columns to be finished in sandstone paint as per approved sample. Columns shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. The fiber work to be supported by MS structure duly painted and secured to the RCC structure with mechnical fastners. The installation shall adhere to all structural stability and public safety. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed. The agency is expected to provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Columns in library - Providing and fixing 450mm dia column fabricated in 3-4mm thick Fiber Glass OR High densityy Styrofoam coated and hardened with resin, to be finished in sandstone paint. The design will contain both decorative and figurative elements. Columns shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed. The installation shall adhere to all structural stability and public safety. Items to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of 6mm acrylic solid surface to form 900mm dia column over 12mm flexible ply supported on GI structure secured to existing column complete will all pasting and treatment of joints and polishing. Item include cost for bending, cutting, making, moulding complete as per drawing. The item include 6nos, 6mm brass inlay rings. The agency is expected to provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.. Zone : D5

After War Block - Providing and fixing 900 mm dia (maximum) column fabricated in 3-4mm thick Fibre Glass OR High densityy styrofoam coated and hardened with resin, inspired by Indian Temple Architecture, covering existing 750mm x 750mm RCC columns to be finished in sandstone paint as per approved sample. Columns shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. The fiber work to be supported by MS structure duly painted and secured to the RCC structure with mechnical fastners. The installation shall adhere to all structural stability and public safety. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed.

48 kos central Installation - Providing and fixing 150mm high and 2400mm diameter base made in 1.5"x1.5", 1.5mm thick MS Section (MS section must have the base coat of MS primer) 12 mm thick flexiply fixed on sides and 19mm thick BWP ply on top. Top layer of 4 mm thick veneer to be finished with final coating of PU polish. 48kos 3D model (to be fit in 2 mts dia ) made in high densityy sunboard/HDF(thickness as required). The sides of raised pedestal to have CNC cut metal jali finished with brass paint. Provision for 2 circular 2" wide lit channel to be made as per design. The design will contain both decorative and figurative elements. The 3D model shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed. The installation shall adhere to all structural stability and public safety. Items to include all material, labour and carriage in all leads, scaffolding and lifts complete.

(A) Providing and fixing 15' dia base to be made in framework of 2" x 2", 1.5mm thick MS Section (MS section must have the base coat of MS primer)12 mm thick flexiply fixed on sides and 19mm thick marine ply on top finished with 4mm thick veneer as per approved shade by the architect. Provision for fixing of touch screen and magnetic trap door for service as per drawing/ detail. (B) Providing and fixing LED frame to be made in 2 mm thick CRC sheet as per detail/design. (C) Providing and fixing 22' dia Top ring to be made in framework of 2" x 2", 1.5mm thick MS Section (MS section must have the base coat of MS primer)12 mm thick flexiply fixed on sides and 19mm thick marine ply on top finished with 4mm thick veneer as per approved shade by the architect. All exposed surfaced of veneer to be finished with approved sample of melamine polish. The MS structure should secured to the RCC structure with mechnical fastners. The installation shall adhere to all structural stability and public safety and would The installation shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved drawings, sketches, artworks and suitable visuals to be supplied by the agency. Production may be on- site or off- site or both and shall be assembled and installed at site locations as instructed. The installation shall adhere to all structural stability and public safety. Items to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 1.5"x 1.5", 1.5mm thk. MS framework with 19mm thick ply on customer site finished with 6mm solid acrylic surface with all joints properly welded as per manufactures recommendation. The partion to be secured to the RCC structure with requisite support and fasterners. The set is completed with making water body in 9inch masonary, with 3 membrane waterproofiing finished 12mm waterproofing plaster. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The cost include making natural landscape in 2-3mm fiber and artificial foliage in treated natural tree trunk with polester leaves including textureing and aging complete in all respect as per the approved artwork and design

Supply, installation, testing & commissioning of 2 revolving mechanishm in the installations at variable speed designed to operate constinuously for 8hrs. The mechnishm should be house in the platfform which is to be fabricated in 1.5"X1.5"X1.5thk. MS structure duly painted with 19 BWP ply. The side of the structure to have 12mm flexible ply with 4mm thk venner duly polished with approved shade of melamine polish. The side to receive 1mm thk brass finish laser cut pattern, The top of the structure to be finished in intricate approved pattern fabricated in 2-3mm fiber glass duly painted A). Providing and fixing of laser cut beatenbrass finish metal sphere in form of fire.B). Acrylic and metal human figure cutout engraving to highlight edges. All mechanical components are designed and manufactured to withstand all static loads including safety factor and all public safety and structural safety norms and standards shall be applicable. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval.

Marriage of Bhim & Hidimba - Supply and installation of immersive cave set design with an accessible door to server room behind fabricated in 3-4mm thick Fiber glass OR High densityy Styrofoam coated and hardened with resin + fibre optics light with fiber glass cover on floor + fibre optics effect on cave wall and floor surface. Fiber option lights and artificatial foliage would be used to create a notional forest landscape. For folliage treated natural tree trunks with polyester leaves to be used. Set to have hyperrealistic mannequins of Bhim, Hidimba and Ghatotkach. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of set installation with base made in 1.5" x 1.5"X1.5mm MS framework to received 19mm BWP ply to provide a base for the set finished with decorative metal and stone work. Sided to be finished with 4mm veneer with 1mm thk brass finish Jalli. At ceiling level a decorative floral pattern to be made in fiber glass and bronze metal finish. The item include cost of the relalistic mennaquinne with Dhanush, including interactive (without technology) dhanush with pedestal. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval

Providing and laying of water body 12'-6" dia in brickwork complete with 3 layer membrane waterproofing with 12mm protective waterproof plater. The item include finihing of the periphery of the waterbody with 6/12mm acrylic solid surface complete with with all base material in MS structure, BWP ply, moulding as in the approved drawing or visual references. Agency to coordinate and make provision for plumbing works. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing chausar game base to have 1.5" X 1.5" X1.5mm MS framework with 19 mm thick BWP ply on top ,12mm thick rugs to be pasted on base. 1mm thick Metal sheet to be pasted on side with approved laser cut design in brass finish. Providing Bolsters and raised pedestal upholstery as approved in centre as per tender drawing/concept. Ceiling to be made in 2" x 2" MS framework with 19 mm thick marine ply on top finished with 4mm thick veneer finished with polish. Laser cut design in brass finish as per concept drawing to be pasted on polished veneer. Columns and beams to be made in 4-6mm thick wire mesh as per concept design/tender drawing. For sizes and finishes refer tender drawings. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval.

Providing and fixing 6" X 450mm high floor base in 19 mm thick BWP ply finished with 10mm thick rugs to be pasted on on top. The sides of the base to be made in 12mm flexible ply with 4mm thk veneer duly melamine polished to have 1mm thick brass finish laser cut metal sheet on it. The ceiling of the area 12mtr dia to be made in gypsum board ceiling as per manufacture recommendation complete with taping jointing and oil base primer receive customised printed wallpaper. LED Screen border to be made in intricate fiber work painted as per approved design and finish secured to the existing structure complete with ply boxing and 1mm thk black laminate. . The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval

Providing and fixing of 15mtr dia dome (1.5 mtr raise) made in MS/GI geodesic structure, with necessary structural supports cladded in 2 layer of 6mm perforated acoustic board and 8 mm compressed fiber acoutic board duly ready to receive projection paint measured as seperate item. The vendor to provide shop drawing and test certificates for approval. Item to include all material, labour, scafolding and carriage in all leads, scaffolding and lifts complete.

Mural: Two dimensional thematic mural with low and high relief as per Approved Artwork made of materials like ceramic, teracotta,fiber glass, etc with limited decorative materials like glass, acrylic, metals of various types and finishes, duly finished as per Approved Artwork. The design will contain both decorative and figurative elements. The 2 dimensional thematic mural with relief shall be detailed as per concept design supplied by the consultant/Engineer-in charge and produced as per approved shop drawings, sketches, artworks and suitable visual represenations to be supplied by the agency. Brick Pattern: On outer surface of the inner enclosure, natural clay brick finish to be created and finished for durability. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive setin 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear facade will be developed in fiber as per the approved artwork. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear wall to have printed backlit stretched fabric panel complete with 4inch aluminium light box with LED modules. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The rear facade will be developed in fiber as per the approved artwork. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set in 3-4mm fiber glass OR High density Styrofoam coated and hardened with resin to create scene as per concept art with hyperrealistic mannequin with all associated items. The mannequin to be developed in silicon with elements and accessories in fiber glass, metal, fabric, PVC, acrylic etc. complete with all textureing and color. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Railing to be made in natural wood as per design. The Set shall have ground cover and base preparation in fiber duly textured and coloured to match approved visual reference. The set to have physical elements like rath/foliage/accessocies to be casted in fiber/metal/wood to give realistic look. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing chariot with hyperrealistic horses complete with all accessocies in silicon, fiber glass, fabric and and metal with seats for visitors at back and 2 wheels made with natural wood and steel. The structure to be reinforced for stability for pubic use. All elements to be finished as per the approved references. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of bell installation in10feet dia. The brass bells are to be arranged in a formation to make an imagery and concentric rings at the bottom. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency is expected to detail the installation for and provide drawings, sketches, shop drawings and suitable visual representations for approval.The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour, scafolding and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of 6' dia enclosures in 2mm thk. MS metal laser cut screen painted in brass finish. Each enclosure to have a pedestal made in wooden/ MS framework with12mmm flexiply finished with 6mm approved acrylic solid surface with brass inlay as per approved pattern. The item include rasing of floor base in MS structure with 19mm ply finished with italian stone finish with brass inlay. Provision, cut-out, support to be provided for housing equipments, electrical and data. The base pedestal raised by 6inch fabricated in MS and 19mm BWP ply to be finished in approved natural stone satuario finish with brass inlay. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding, scafolding and lifts complete.

Providing and fixing sudarshan chakra made in fibre glass OR High densityy Styrofoam coated and hardened with resin, top layer finished as per approved sample. The fabricated unit to be placed over a raised pedestal 3' high fabricated in MS structure 2"X2"X1.5mm cladded in 19mm ply finished in matching finish.. The agency is expected to detail the set for supply and installation of set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 4Mtr of glass enclosure in 6+6mm Laminated/ toughned curved glass supported on floor and ceiling with concealed channels. The glass to receive projection film. The installation to have 2 concentrics ceiling suspended 1.8mtr high glass (6+6mm laminated). The concentric rings of glass to revolve along its axis. The rotating mechanism to be developed to operate smoothly without jerks and noise. The suspended glass to receive vinyl cut letters of approved content. The item include fabrication and installation of 6nos. in brush finish SS pipe complete with all hardware for interactive screens. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Gita book replica: Providing and fixing of decorative base in hardwood finished with brass paint finish. Size: 5'X3', Height 2'-6". The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall supply and install along with all required installation fittings, fixtures and hardware and make provision for technology. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of immersive set to create scene as per concept art. The wall finished to be developed in fiber glass (3-4mm thk.) and textured & painted to replicate the period look. The set includes approved accessories to resemble Kings court including throne, loose furniture, drapery etc. The item includes scrim screen on front of the set for holographic projection. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete..

Providing and fixing of immersive set to create scene as per concept art. The facade to be developed in fiber glass (3-4mm Thk.) and textured & painted to replicate the period look. The central boady to be costructed in brickwork with 3 layer waterproofing and 12mm protective plaster. The outer sides are to be finished with fiber and colored as per approved concept. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of Ramp to be made in 2"X2"X1.5mm MS hollow section cladded with 19mm BWP/ 12mm flexible ply finished in 6mm Acrylic solid surface in statuario finish. The item include 900mm high curved 6mm+6mm laminated glass railing on both sides of the ramp. swarglok door at the end made out of 2 layered transparent glass with approved frost design as per design. To also have provision for light smoke effect. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Provding and fixing of yog mannequine in high gloss silver finish against a back ground of wrought iron metal design jalli work. The item included 5 pedestals made in MS framework + 19mm BWP ply finished with green granite. The provision for wires and equipments to be provided. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 6 bottom cases on floor of 1"x1"X2mm MS framework as main frame covered with 12 mm thick ply then 6mm thick MDF on it with duco paint finish, 10 mm thick toughened glass case on above. spotlight in centre.for sizes refer to detailed drawing. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 5 pedestals of size 450mm width , 600mm depth and 1050mm height fabricated in 1"x1"x 2mm MS framework as main frame covered with 12 mm thick ply then 6mm thick MDF on it with duco paint finish for mounting touchscreen on it. The item include 15ft dia tilted dome with (0.5mtr raise) made in GI/MS Geodesic structure, with necessary structure supports, cladded in 2 layer of 6mm perforated acoustic board and 8mm of compressed fiber acoutic board ready to be painted with projection paint (measured in seperate item) complete as per approved drawing. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency is expected to detail the set for supply and installation of an immersive set and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing of high gloss SS reflective sphere 1800mm for atom from structure slab. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The item include 2nos of pedestals fabricated in 1"X1"X1.5mm MS hollow section and 19mm ply finished with 6mm approved solid acrylic surface to house 55inch screen. The agency to consider making provision for installation, access and maintainance of the equpment and wiring. The agency shall ensure durability, public safety and structural safety of the installation. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. Providing and fixing Base with provision for 32" touch screen ipads , 750mm high with granite cladding and provision for access at the bottom. Inclusive of all hardwares.

Interactive Station at Aryabhatta installation: Fabrication of pedestal as per drawing for housing of interavtive screens complete with hardware. The pedestals to be fabricated in 1'X1' X1.5mm hollow MS pipe with flexible ply cladding good to receive12mm acrylic solid surface on top and 6mm on sides matched to profile complete cutting, bending, finishing of joints. The agency to consider making provision for installation, access and maintainance of the equpment and wiring. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing a light installation in shape of tree with hollow 2-3inch tubes of varying height as per drawing finished with approved paint metallic paint finish with 1W dimmable LED (with analog control) light fitted on one end of the pipe suspended from the ceiling. Approximate no. of suspended tubes 450. The item included making of the support framework in MS at ceiling level finished 19mm BWP ply with black laminate. The agency shall supply and install along with all required installation fittings, fixtures and hardware, internal electrical wiring circuit and analog dimmer control. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing Registration Desk made with 19mm thick ply, finished with 12mm acrylic solid surface cladding and brass inlay strips including all hardware and storage as per design. Inclusive of all hardwares as specified.The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 1800mm and 450mm deep high library shelves in 19mm BWP with approved pinewood finish veneer complete as per drawing with groove and joinery and PU polish. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and Fixing of 450mm high, 600 wide wooden seating with carcas made in MS square bar1.5"X1.5" and 1.5mm thk. cladding with 12mm+6mm flexible ply to form the curved shape, finished with 100mm Canadian red pine planks on all sides with approved size and pattern with PU polish. The cost include making of the cove at bottom. Agency to ensure fabrication as per approved drawing complete with hardware and accessories.

Providing and fixing 25' dia and 2'6" dia serving counter made out of 19mm ply finished with marble top (BR: 200/sqft) with all exposed areas to be cladded with 10mm seasoned Canadian red pine wood with tint of approved shade finished with melamine polish. Internal storage to be finished in veneer. The internal side of the counter to be finished in 1mm matt finish lamainte (BR: 35/sqft) Provision for electrical fitting should be inside the storage. POS station. To be fabricated as per approved drawing complete with hardware and accessocies.

Providing and fixing 5' x 2'6" x 2'6" height service station made with 19 mm ply finished with 4mm veneer on out side surfaces complete the melamine polish . The top of the unit to be finished in stone stop (BR: 200sqft). All internal surface and shelved to be finished in 1mm thk laminate (BR:35/sqft). To be fabricated as per approved drawing complete with hardware and accessocies.

Providing and fixing 12mm thick 900mm high curved laminated and linear toughened glass railing. Inclusive of all hardwares.

Providing and fixing pedestal made in natural 18mm statuario stone finish with carcas made in 1"X1"X1.5" MS hollow section with 19mm BWP ply of size 750mm x 750mm in plan varying in height between 750mm to 1200mm height. The item include cutting, fixing, polishing and finishing of joints to provide seamless finish. The cost includes making of artifact carved in sandstone. To be fabricated as per approved drawing complete with hardware and accessocies.

Providing and fixing 12 mm thick toughened glazed partition including all hardware and locks. Maximum glass height to be 10ft. 2 nos x Door to be double glazed door of size 1800mm x 2400mm height. Rates to be inclusive of all hardwares. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and fixing 450mm high sitting ledge with 600mm depth made with approved design made in MS 1"X1"X1.5mm MS structure cladded in 19mm BWP ply finished with 12mm seasoned wood base and facia. Provide for cove light to be made at skirting level. The items includes melamine polish on planks finished in all respect as per the drawing complete with all accessories.

Providing and fixing bulkhead/facia/flashing measuring 300-450mm (height) in 3-4mm fiber above or on sides of the partition as per design and detail to conceal gaps between ceiling and partition and other structural elements. The same to be finished in approved texture and paint. The agency is expected to detail the the design and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing 12mm thick laminated curved glass complete with all hardware and fittings for a height of 900mm as per design and detail. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing stretched ceiling with 75mm aluminum LED light box with 3mm ACP backing ensuring good rigidity. The printable stretched fabric should be seamless with welded joints, bone on edges, stretched and tucked on the frame . The item include 3000K WW LED modules of samsung make complete with driver. The finished product should be devoid of wrinkles and and distortion of the printed image. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

APPROVED ITALIAN MARBLE - TYPE I Providing and laying of Italian Marble 16mm to 18mm thk of approved colour shade in flooring and skirtimg & size in slabs/ bands/ strips, laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of stone including grinding, cleaning, rubbing and diamond polishing with sealer, applying wax etc. all as per drawing. Basic Rate: Rs 400/sqft If any existing flooring is present, then the cost of demolition to be included in this cost

VITRIFIED FULL BODIED BROWN TILE Providing and laying Vitrified tiles of size 600X1200mm of approved make in flooring and skirting, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 120 per sqft If any existing flooring is present, then the cost of demolition to be included in this cost

APPROVED ITALIAN MARBLE WITH 6MM THICK BRASS INLAY Providing and laying of flooring in Prepolished Italian Marble 18mm thk of approved colour shade & size in slabs/ bands/ strips, with 6mm brass inlay as per approved floral pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and diamond polishing, applying wax etc. all as per drawing. Basic Rate for marble: Rs 400/sqft. If any existing flooring is present, then the cost of demolition to be included in this cost

HAND GLAZED CERAMIC TILE (in water body) Providing and laying of glazed handmade ceramic tiles measuring 100mm x 100mm in cement mortar 1:4 and grooved to be filled with epoxy grout. The tile to be laid as per approved pattern. Completed as per design & details are provided,. Basic Rate: Rs 225/sqft If any existing flooring is present, then the cost of demolition to be included in this cost

APPROVED ITALIAN MARBLE - TYPE II Providing and laying of flooring in Prepolished Italian Marble 16mm to 18mm thk of approved colour shade & size in slabs/ bands/ strips, with 6mm brass inlay as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and diamond polishing, applying wax etc. all as per drawing. Basic Rate: Rs 400/sqft Zone : B6 If any existing flooring is present, then the cost of demolition to be included in this cost

APPROVED ITALIAN MARBLE - TYPE III Providing and laying of flooring in Prepolished Italian Marble 16mm to 18mm of approved colour shade & size in slabs/ bands/ strips, with 6mm brass inlay as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and diamond polishing, applying wax etc. all as per drawing. Basic Rate: Rs 400/sqft If any existing flooring is present, then the cost of demolition to be included in this cost

VITRIFIED TILE - RUGGED GREY - TYPE I Providing and laying Vitrified tiles of size 600X1200mm of approved make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 120 per sqft Zone : C3, C4-C13, A7 & F4 If any existing flooring is present, then the cost of demolition to be included in this cost

VITRIFIED TILE - WOODEN FINISH - TYPE II Providing and laying Vitrified tiles of size 600X1200mm of approved make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 120 per sqft Zone : D4 If any existing flooring is present, then the cost of demolition to be included in this cost

NYLON CARPET ON RAISED PEDESTAL Providing and laying of cut pile customised pattern carpet made in 80% wool with 8mm pile height and 600gms/sqmt weight with pp backing to be pasted over 6" high pedestal made in 2"X2" grid 1"X1"X1.5mm MS hollow tube with 19mm BWP ply on top to receive carpet.The same to have fire resistant coating. The agency shall ensure durability, public safety and structural safety of the installation. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. Zone: F1 If any existing flooring is present, then the cost of demolition to be included in this cost

VITRIFIED TILE - BLACK & WHITE - TYPE III Providing and laying of black and white color vitrified tile flooring of size 600mm x 600mm of approved colour shade & size as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing.Basic rate of tile - Rs 120 per sqft Zone : B7 If any existing flooring is present, then the cost of demolition to be included in this cost

APPROVED INDIAN MARBLE - TYPE IV Providing and laying of flooring in Prepolished Indian Marble 16mm to 18 mm thk of approved colour shade & size in slabs/ bands/ strips, with 3mm brass inlay as per approved geometrical pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and diamond polishing, applying wax etc. all as per drawing. Basic Rate: Rs 175/sqft Zone : G1, G2 If any existing flooring is present, then the cost of demolition to be included in this cost

APPROVED BLACK GRANITE Providing and laying of flooring in Prepolished black granite 18mm thk of approved colour shade & size in slabs/ bands/ strips, as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Basic Rate: Rs 225/sqft Zone : G4 If any existing flooring is present, then the cost of demolition to be included in this cost

VITRIFIED TILE - SANDSTONE FINISH - TYPE IV Providing and fixing of approved tile Basic rate 100/sqft of size 600mm x 1200mm. wall tiles on existing brickwork with neat cement. The cost include 12mm 1:4 (cement: sand) rough plaster lain in proper plumb and level. The joints are to be treated with approved epoxy grout. Cost to include labour, wastages, curing, cleaning, washing the surface with water/soap solution after completion as directed and inclusive of all lead, lifts, providing necessary protection for walls, providing scaffolding as per approved safety norms at all levels and elevations, etc. complete, as per the instructions. Zone : G Block If any existing flooring is present, then the cost of demolition to be included in this cost

CAFE INDOOR TILE Providing and laying Vitrified tiles of size 600 x 1200mm of approved make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 85 per sqft Zone : G6 (indoor) If any existing flooring is present, then the cost of demolition to be included in this cost

CAFE OUTDOOR TILE Providing and laying Vitrified tiles of size 600 x 600mm in matte finish, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 60 per sqft Zone : G6 (outdoor) If any existing flooring is present, then the cost of demolition to be included in this cost

GRANITE FLOORING FOR OUTDOOR Providing and laying of 20mm black flamed/polished granite stone flooring for outdoor area of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 220 per sqft Zone : E If any existing flooring is present, then the cost of demolition to be included in this cost

SERVER & STORE ROOM TILE Providing and laying Vitrified tiles of size 600X600mm of approved make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 60 per sqft Zone : Critial Rooms and store rooms If any existing flooring is present, then the cost of demolition to be included in this cost

ANTISKID FLOOR TILE FOR TOILETS Providing and laying Vitrified tiles of size 600X600mm of approved make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer, cleaning, protection by POP over black polythene sheet OR 1.3 MM GSM bubble sheet till handing over the project or as per engineer in charge, etc. complete as per drawing and design. The rates includes for all lead & lift, all levels & height, all floors .Basic rate of tile - Rs 60 per sqft If any existing flooring is present, then the cost of demolition to be included in this cost

ITALIAN MARBLE FOR STEPS Providing and laying of flooring for tread and riser in Prepolished Italian Marble 16mm to 18mm thk of approved colour shade and 4mm - 3 no. groove & size in slabs/ bands/ strips, laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with white cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and pre polished , applying wax etc. all as per drawing. Cost to include double moulding and polishing on all visible surfaces. The rates includes for all lead & lift, all levels & height, all floors . Basic rate of stone - Rs 400 per sqft If any existing flooring is present, then the cost of demolition to be included in this cost

VINYL FLOOR Providing & laying minimum 2.6 mm thick approved Acoustic Vinyl Flooring. The top surface must be treated with overclean XL surface protection technique as per manufacturers specifications. The product Should have , Abrasion resistance - Group T, Commercial Use: Class 34; Industrial Use: Class 42, Stain Resistance: Good, Reaction to fire: Bfl-s1; Slip Resistance: R9. The Vinyl flooring must conform to all standards, including the new VOC emission classes and must be Phthalate Free. The welding / seaming shall be done using hot air welding gun with approved aluminum profile.The item includes 6mm self levelling of the floor on existing surface for achieving smooth installed surface of vinyl floor. The cost include Item to include all material, labour and carriage in all leads and lifts complete. RATE ONLY If any existing flooring is present, then the cost of demolition to be included in this cost

EPOXY FLOOR Providing and laying of 75mm trimix floor of M20 grade concrete with minimum reinforement as per IS standard or as approved by the consultant/Engineer-in charge to be laid in level and finished with trovel. The item include 3mm epoxy floor as per manufacture specification of approved color. The agency shall supply and install along with all required installation equipment and accessories. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. RATE ONLY If any existing flooring is present, then the cost of demolition to be included in this cost

Providing and fixing 9' x 9' x 4' high Swastic shaped customised table made in 19mm BWP ply carcass finished with approved laminate complete with drawer, storage, shelf. The item include set of 4 solid burma teak wooden chair of size 22" x 22" with back height as 3'-0" and seat height 1'-6"with approved PU polish. The rate to include all hardwares complete.

Providing and fixing of pedestal 1200mm x 750mm x 750mm to house 55inch touch tablets, carcus made out of 2"X2"X1.5mm MS structure with 19mm ply cladding finished with seasoned Canadian red pine wood complete with groove and joinery and approved PU polish as per approved drawing. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing 1200mm x 600mm x 1200mm (LXBXH)) book storage with mutiple shelves made out of 19mm thick ply finished with approved 1mm thk. laminate including edge finishing, grooves complete as per the approved drawing. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing 1200mm x 600mm x 450mm (LXBXH) coffee table made out of solid seasoned Canadian red pine wood with top carcas fabricated in 12mm BWP ply cladded with 10mm Canadian red pine wood slats complete with edge finish to give solid wood look as per the drawing. The base of the table to be made in 40mmX60mm Canadian red pine wood complete with hardware and accessories. The table is to be finished with melamine polish. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing of L-Type office table unit 2400mm x 1900mm for manager office made out of 19mm thick ply finished with approved 1mm thk approved laminate including all hardwares, edge binding, cable manager and provision of electrical switch sockets. Each unit to have 3 drawer under table unit, modesty panel and 3 push back, height adjustable egronomic roller chair . Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing linear 3700mm x 600mm work table in 19mm thick ply with 1mm thk. approved laminate including all hardware, edge binding, cable manager and provision for switch socket, 3 drawer cabinet and 3nos egronomic task chairs with approved side partitions made out of 19mm thick ply finished with approved 1mm thk laminate complete as per drawing. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and Fixing cafeteria indoor table furniture type-1 of 1200mm x 1200mm table top made out in 19 mm BWP ply with 1mm laminate with hardwood 40mm round bull nose edge beading. The base is to be fabricated in 304SS 100mm pipe with heavy base complete as per the drawing. Item includes 4nos ABS chair with SS legs. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and Fixing cafeteria outdoor table furniture type-2 of 1200mm x 1200mm table top made out in 18 mm BWP ply with 18mm approved granite stone installed on top with double moulding on edge with edges champhered. The base is to be fabricated in 304SS 100mm pipe with heavy base complete as per the drawing. Item includes 4nos PVC wicker chair with metal legs. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

It should be portable 2048 parameter control solution that can be used in nearly any location. It should offers two built-in DMX ports as well as the possibility to send two additional DMX universes via Ethernet protocols .29 rotary RGB backlit encoder • 5 dual encoders • 10 motorized 60 mm faders • 40 separate playbacks • 16 assignable x-keys • 2 motorized A/B faders 100 mm

SITC Of Spot light with the following or Higher Spec :54x3W RGBW Leds, AC100~240V, 16°/25° standard optics, 1 controllable section, IP20,16-bit, CE,BIS

SITC of 1500W fog machine with. High performance pump for optimum output, Automatic circuit cut-off to protect pump if fog fluid tank runs dry. 3 Operational modes: Manual, Timer Mode, or DMX Controlled. 3 DMX Channels, 3-button DMX LCD display on rear panel, 3-pin DMX XLR In/Out connections, Heater: 1500W. Fog Output: 21000 (cu.ft/min), Fog Fluid Consumption: 162ml/min. Power Consumption: 1600W max, Power: AC 120V/60Hz or 230V/50Hz (non switching) .The effect achine should be ETL listed

Supply installation testing and commissioning of DMX Cable : RS-485, 1 Pair 24AWG (7x32) Tinned Copper, PE Insulation, Overall Beldfoil®+Tinned Copper Braid(90%) Shield, PVC Outer Jacket, CM with minimum specifications as specified in the tender

SITC of DMX Recorder and Playing Device Which is able to Handle 4 Universes of Dmx Channels

SITC of 800W high-output, continuous low-lying fog machine, which uses standard water-based Kool Fog juice and ice cubes to generate an effect similar to that of dry ice. Featuring an intuitive menu system accessed via a backlit 16-character LCD display, the unit is easy to setup for DMX control, remote control, timed intermittent operation or immediate continuous output. Output: 150m²/min. Ice tank capacity: 2.5 kg. • Fluid Consumption: 15ml/min. • Fog Fluid tank: 1-liter internal tank. 1 DMX channel • New LCD Display with 4-button system menu • On-board controls: timer output, continuous output • 3-pin DMX In/Out connections • Locking power connection.

SITC of Light Bar made of 50mm dia pipe to be hanged from the existing MS Structure with MS flat 50X 6 mm . Painting of MS pipe & suspenders with 2 Coats of reoxide primer and 2 or more coats of enamel paint of approved shade Custom

SITC of Simulated water flowing effect light - The multi-colored simulated water flowing effect with a 80W LED source. Designed to project on walls, ceilings or floors with or without fog – great for mood or background lighting • Equipped with 2 glass effect wheels and 1 independent dichroic color wheel • 5 colors: Orange, Green, Blue, Yellow, Purple + White & Split Colors. Manual focusing lens • Color wheel rotation on/off button • 2 operational modes: seamless scrolling colors or single color operation • Beam angle: 43 or 34 degrees (optional) • Includes hanging bracket. Power consumption: 23.8W • Long life LED (30,000 hr. rating) • Switchable voltage: 120V/60Hz or 230V/50Hz (IEC Plug)

SITC of DMX Splitter : 8Channel DMX Signal Splitter

SITC Of Inground Spot light with the following or Higher Spec : 12W, Multi-LEDs RGBW, AC100~277V,16° standard optics, 1 controllable section, IP67,IK10,CE,BIS

SITC Of Liner Wash light For Graze Effect with the following or Higher Spec :60W,Multi-LEDs, AC100~277V,15/10/25/30/ 60/15x30/60x15° standard optics, 3 controllable section, IP66,,Heat Sink Cooled (No Fan Cooling for Noise less perforance),16-bit Dimming ,Width >900mm,CE,BIS

SITC Of Mid Spot light with the following or Higher Spec :25W, Multi-LEDs RGBW, AC100~240V, 22°/30° standard optics, 1 controllable section, IP66,Heat Sink Cooled (No Fan Cooling for Noise less perforance),16-bit, Power factor>0.9,NLQST Safety Tested,CE,BIS

SITC Of Mid Spot light with the following or Higher Spec :25W, Multi-LEDs RGBW, AC100~240V, 22°/30° standard optics, 1 controllable section, IP66,Heat Sink Cooled (No Fan Cooling for Noise less perforance),16-bit, Power factor>0.9,NLQST Safety Tested,CE,BIS

SITC Of Mid Spot light with the following or Higher Spec :25W, Multi-LEDs RGBW, AC100~240V, 22°/30° standard optics, 1 controllable section, IP66,Heat Sink Cooled (No Fan Cooling for Noise less perforance),16-bit, Power factor>0.9,NLQST Safety Tested,CE,BIS

SITC Of Mini Fresnal light with the following or Higher Spec : 40W LED - 3200K Source, AC100~277V,12-34° Zoomable optics,Manual Dimmer , CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 13W, 3200K Source, AC100~277V,19°/26°/36° standard optics,Manual DImmer ,CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 15W, Multi-LEDs 3200K, AC100~240V, 6°/14°/22°/30° standard optics, 1 controllable section, IP66,Heat Sink Cooled (No Fan Cooling for Noise less perforance), 16-bit Dimming,Power factor>0.9,NLQST Safety Tested,CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 15W, Multi-LEDs 3200K, AC100~240V, 6°/14°/22°/30° standard optics, 1 controllable section, IP66,Heat Sink Cooled (No Fan Cooling for Noise less perforance), 16-bit Dimming,Power factor>0.9,NLQST Safety Tested,CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 25W, 3200K Source, AC100~277V,19°/26°/36° standard optics,Manual DImmer ,CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 25W, 3200K Source, AC100~277V,19°/26°/36° standard optics,Manual DImmer ,CE,BIS

SITC Of Mini Spot light with the following or Higher Spec : 53W, RGBW AC100~277V,6°/14°/22°/30° standard optics, Electronic Dimmer DImmer ,CE,BIS

SITC Of Pixel Wash light with the following or Higher Spec :12W,48 SMD5050 Multi-LEDs RGB, standard optics, 16 controllable section, IP65,16-bit Dimming ,Width >980mm,CE,BIS

Waterproof LED water ripple projector, waterproof grade IP66, designed with die-cast aluminum housing and cooling system with fans to ensure the stability of fixture. Equipped with intelligent electronic zoom system, 30°-60°can be linearly adjusted.Built-in 4 color wheels, and 2 dynamic effect wheels, AG1841SCT can achieve wealth of dynamic and colorful effect; Equipped with touch button OLED screen, this product is highly applied to theme park, playground, landmark building, live-action performances and other large and medium-sized venues.

SITC of the Lumainre should be compact moving head spot fixture powered by a 300W cool white LED engine. It is equipped with motorized focus, motorized zoom, motorized Iris, two prisms and two frost filters. It has two GOBO wheels and two color wheels. The rear panel has PowerLock In/Out to daisy chain power, 3-pin and 5-pin DMX In/Out and RJ45 connections. 2 DMX Channel Modes: 22/25 Channels. Color LCD display with 6-button function menu. Multi-voltage operation: AC 90-240V, 50/60Hz • Max power consumption: 380W. The fixture should be ETL listed

Providing and fixing of 2"X2"X2.6mm MS hollow section laid as per the layout on curved / flat / dome or any other geometry as per design with support at every 600mm in both directions with all welded joints and secured to structure with requsite support from the structure with fastners at internal not more than 1200mm. Sections to formed/bend to match the layout and provide even surface to receive 12mm ply on sides. The welded joints to be grinded and duly levelled to provide a smooth surface. The MS structure to be painted with 2 coats of anti rust paint. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing Ultraframe metal system up to ceiling height, which includes framework made of pressed/ roll form G.I. sheet with zinc coating of 120 GSM, consisting of U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either end. C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers.

Providing and fixing of 40mm solid core flush door 1000mm(w)X2100(H) with 1mm laminate on both sides (BR: 35/sqft) with 5mm margin on all sides complete with all hardware and fitting - 4nos hinges, door closure, door stopper and mortise lock.. The item includes 50X85mm seasoned solid wood door frame with 10mm rebate finished in approved duco finish. Item to include all material, labour and carriage in all leads, scaffolding, scafolding and lifts complete

Supply and installation of 4" High Front skirting in 12mm HDF duly finished with approved duco finish. Skirting to be secured to the panelling with screws and adhesive. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing of MS catwalk MS plates, angles, channels etc. i/c fabrication (HSR Item Code B0979)

Providing and laying of 2 coats of paint suitable for projection of approved quality by sand papering the surface, applying one coat of primer, prepare the surface with two coats of full putty, sand papering again, repeating a coat of primer, applying one coat of plastic paint, touching up with putty & applying two final roller coats of plastic paint, to internal wall/ceilings masonry concrete surfaces. Recommended paint finish, Item to include all material, labour and carriage in all leads, scaffolding and lifts complete.

Providing and laying of 3 coats of plastic paint of approved quality & shade by sand papering the surface, applying one coat of primer, prepare the surface with two coats of full putty, sand papering again, repeating a coat of primer, applying one coat of plastic paint, touching up with putty & applying two final roller coats of plastic paint, to internal wall/ceilings masonry concrete surfaces. Paint codes to be as shown in drawing. Item to include all material, labour and carriage in all leads, scaffolding and lifts, scafolding complete.

Providing and laying of texture paint of approved quality & shade by sand papering the surface, applying one coat of primer, prepare the surface with two coats of full putty, sand papering again, repeating a coat of primer, applying one coat of plastic paint, touching up with putty & applying two final roller coats of plastic paint, to internal wall/ceilings surfaces. Paint codes to be as shown in drawing. Item to include all material, labour and carriage in all leads, scaffolding and lifts, scafolding complete

Providing and Applying of approved customised wallpaper of existing surface. The item is complete with all hardware and support. Item includes all material, labour and carriage in all leads, scaffolding and lifts complete. Basic Rate: 250/sqft

Proving and fixing of 2mm thk. MS jalli laser cut in an approved pattern installed as screens. The item include cutting, bending, profiling of the sheet to make self supporting panels of 4mtr high. The pattern will contain both decorative and figurative elements. The agency will shop drawings, sketches, artworks and suitable visual represenations for approval. The screens are to be treated with anti rust paint and finished to a brass finish paint. Item to include all material, hardware, labour and carriage, scafolding in all leads, scaffolding and lifts complete.

Providing & Fixing of 1mm thick laminate on HDF/plyboard in coordination with drawings submited. The cost includes labour, fixing materials, wastages, hardware, lead, lifts, cutting etc complete as per the drawings, instructions. (Ply board and framework measured seperately). Basic Rate: 35/sqft

Providing and fixing of 10mm thk seasoned solid Canadian red pine wood slats used of 3 layers as per the design pattern installed over existing ply with necessary hardware and adhesive complete with groove, edging, molding and cornice. The surface is to be treated with antitermite paint and duly finished in melaminae polish with putty and sealer coat of approved shade. The cost includes labour, fixing materials, wastages, hardware, lead, lifts, scafolding cutting etc complete as per the drawings, instructions.

Proving and fixing of 4mm thk fiber duly textured and painted as per approved artwork in internal elevations. The design will contain both decorative and figurative elements. The agency will shop drawings, sketches, artworks and suitable visual represenations for approval. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. RATE ONLY

Proving and fixing of exposed brick work in 4mm thk fiber duly textured and painted as per approved artwork. The design will contain both decorative and figurative elements. The agency will shop drawings, sketches, artworks and suitable visual represenations for approval. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. RATE ONLY

Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-Charge. HSR 11.57

Providing and fixing bulkhead/facia/flashing measuring in 3-4mm fiber reinforced plastic above or on sides of the partition as per design and detail to conceal gaps between ceiling and partition and other structural elements. The same to be finished in approved texture and paint. The agency is expected to detail the the design and provide drawings, sketches, shop drawings and suitable visual representations for approval. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing of approved shear curtain complete with cutting, stitching, hemming, pleating to form curtain drapes installed on curtain rods secured to the structure. The agency shall supply and install along with all required installation fittings, fixtures and hardware. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads, scaffolding and lifts complete. Basic rate of Fabric: Rs. 300 per mtr.

Providing and fixing of 1mm thk. Satuario finish laminate on existing HDF/plyboard in coordination with drawings submited. The cost includes labour, fixing materials, wastages, hardware, lead, lifts, scafolding, cutting etc complete as per the drawings, instructions. (Ply board and framework measured seperately). Basic Rate: 45/sqft

Providing and fixing of 6mm acrylic solid surface over existing structure complete will all pasting and treatment of joints and polishing. Item include cost for bending, cutting, making provison for wires and other technical equipment.

Providing and fixing of acoustic panelling on existing framework with 2nos. 12mm perforated acoustic board with 12mm compressed acoustic fiber board of NRC value 0.9. The item includes glass wool 24kg/cum densityy infill in existing structure secured through chicken mesh. The joints of the board to be seamlessly installed to give even finish at joints. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions.

Providing and fixing of 12mm thk. BWP ply over existing structure with staggared joints properly levelled to provide smooth finish ready to receive either gypsym or HDF finish. The item is complete with all hardware and support. Item includes all material, labour and carriage in all leads, scaffolding and lifts complete

Providing and fixing of 12.5mm thick Gypsum board cladding as approved by the architect including jointing and taping on ply board/MDF board over existing GI/MS stud framing or on GI stud framing as per the drawings and specification. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions. (Ply board and framework measured separately). (make - India Gypsum, Lafarge or USG Boral make)

Providing and fixing of 6mm thick HDF over existing ply surface as per drawings and specifications. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions. (framework measured separately).

Providing and fixing of 2 layers of Fire Rated 12.5mm thick Gypsum board cladding as approved by the architect including jointing and taping over existing GI/MS stud framing. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions. (Ply board and framework measured separately). (make - India Gypsum, Lafarge or USG Boral make)

Supply, Installation, Testing & Commissioning of water curtain with capability of continiously recycling water.. The item include cost for nozzle, Solenoid valve, Submersible pump, with piping and hardware complete for smooth operation. Water curtain height - 14' The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions.

Supply, Installation, Testing & Commissioning of water curtain with capability of continiously recycling water. The item include cost for nozzle, Solenoid valve, Submersible pump, with piping and hardware and complete for smooth operation. Water curtain height - 14' The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions. - 3 UNITS. of 15' water curtain height.

Supply, Installation, Testing & Commissioning of circular digital water curtain with capability of continiously recycling water. The item include cost for Drip nozzle, Strings guides, Solenoid valve, Submersible pump, with piping and hardware and software complete for smooth operation. The water curtain should be able to made various patterns as per requirement. Water curtain height - 14' The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels etc. complete as per the instructions.

Supply, Installation, Testing & Commissioning of Software to play video on Display the video should be seamless without any flicker when the loop repeats.

Supply, Installation, Testing & Commissioning of Software to play video on projection having capability of blending, wrapping the video should be seamless without any flicker when the loop repeats.

Supply, Installation, Testing & Commissioning of Software to receive Touch from the Touch panels and show content based on touch interaction.

Supply, Installation, Testing & Commissioning of Software and appropriate hardware to receive information from sensor/control board and pass to the Software to play corresponding animation/video.

Supply, Installation, Testing & Commissioning of Software to receive Touch from the tablet and show content based on touch interaction. The application should have capability such that it cannot be closed by the visitors and should be able to start on boot.

Supply, Installation, Testing & Commissioning of Museum Management System as per entire SRS Document

Supply, Installation, testing & commissioning of media server license as required by all the exhibits

Development Hosting & Management of Museum Website and Mobile Application as per detail given in tender document.

Supply, Installation, testing & commissioning of Dual-channel, 120W @ 4Ω / 8Ω / 100V /70V Mixer Amplifier, Sensitivity :Mic Input: 3mVRMS, Line Input: 775 mVRMS, RCA Input: 300mVRMS; Signal to Noise Ratio (A-Weighted) >90 dB, THD (full rated power, 20 Hz - 20 kHz) : 0.5% , Frequency Response (at 2.83VRMS) :4/8 Ohm Output: 20Hz - 20kHz, +/-2dB, 70V/100V Outputs: 80Hz - 15kHz +/-2dB; Crosstalk (1 kHz) : - 70 dB; Phantom Power: 27VDC

Supply, Installation, testing & commissioning of Single-channel, 120W @ 4Ω / 8Ω / 100V /70V Mixer Amplifier, Sensitivity :Mic Input: 3mVRMS, Line Input: 775 mVRMS, RCA Input: 300mVRMS; Signal to Noise Ratio (A-Weighted) >90 dB, THD (full rated power, 20 Hz - 20 kHz) : 0.5% , Frequency Response (at 2.83VRMS) :4/8 Ohm Output: 20Hz - 20kHz, +/-2dB, 70V/100V Outputs: 80Hz - 15kHz +/-2dB; Crosstalk (1 kHz) : - 70 dB; Phantom Power: 27VDC

Supply, Installation, Testing & Commissioning of Multichannel Digital Network Based Power Amplifier with Power output 4 x 600W @ 4 Ohms / 8 Ohms, Four-channel Audio amplifier, 4x 600W at 4 and 8 Ohm, 70Vrms and 100Vrms output on all Four channels; THD (at full rated power, 20Hz - 20kHz) =0.35%, Cooling Continuously variable speed forced air, Voltage Gain Max level= 34dB, Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Damping Factor (20 Hz to 100 Hz) : >1000

Supply, Installation, Testing & Commissioning of Multichannel Digital Network Based Power Amplifier with Power output 8 x 600W @ 4 Ohms / 8 Ohms Eight-channel Audio amplifier , 8x 600W at 4 and 8 Ohm, 70Vrms and 100Vrms output on all Eight channels THD (at full rated power, 20Hz - 20kHz) =0.35%, Cooling Continuously variable speed forced air, Voltage Gain Max level= 34dB, Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Damping Factor (20 Hz to 100 Hz) : >1000

Supply, Installation, Testing & Commissioning of Four Channel Digital Power Amplifier, 300W@4 Ohms On-board Digital Signal Processor and includes these integrated features: Input Router, Input Delay – Up to 1000ms, Input Parametric EQ – 8 band, Crossover, Output Parametric EQ – 8 band, Output Delay – Up to 100ms, Limiter, Should be controllable, configurable and monitorabe through standard TCP/IQ network. Each output channel should be capable of providing either 70V or 100V for high impedance applications. Completely configure the amplifier using an intuitive front-panel interface. Should have GPIO/AUX Port to Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined Digital Signal Processing :96kHz, 32-bit floating point, Voltage Gain (at maximum level setting) 4/8Ω, 70Vrms and 100Vrms Operation : 34dB, Frequency Response (8Ω, 20Hz - 20kHz): +/-0.25dB, Total Harmonic Distortion (at full rated power, from 20Hz - 20kHz) : 0.35%, Analog Input Signal to Noise Ratio (ref. rated power, 100V,20Hz - 20kHz): >104dB, Damping Factor (20Hz to 100Hz) : >1000, Crosstalk (below rated power, 20Hz to 1kHz) : >80dB

SITC of Four-channel, 1250W @ 4Ω Analog Power Amplifier, 70V/100V, Amplifier- Class D; Four-channel, 1250W @ 4Ω,8Ω70V/100V; Frequency Response-±0.24dB; Signal to Noise Ratio- (A-weighted) >104dB; Damping Factor (20Hz to 100Hz)>1400, Note: In case bidder wants to quote with Dual channel /Higher channel amplifier, the total qty. amplifier numbers should be equal to or more than the total number of channel required as per specifications.

Supply, Installation, Testing & Commissioning of DSP with Four Analog Input and 4 Analog Output, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, Low Latency, Fault Tolerant Digital Audio Bus 48 Channel, Clear Front Panel LED Indication, Signal Processing (MHz) : 400, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port, 1 Ethernet port for Monitoring and configuration, Capable to handle +5V unloaded logic output voltage, at-least 6, Should have speech sense engine, Capable to control 3rd party devices with TCP IP and RS 232, Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus along with source and volume controller

Supply, Installation, Testing & Commissioning of DSP with 64x64 Dante/AES 67, Four Input / Output Card Slots ( 4 I/O card ), 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus, Clear Front Panel LED Indication, Dante 4.0 firmware for integration with Dante Domain Manager, Signal Processing (MHz) :800, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port, 1 Ethernet port for Monitoring and configuration, Capable to handle +5V unloaded logic output voltage, at-least 6, Should have speech sense engine, Capable to control 3rd party devices with TCP IP and RS 232, Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus. 2 no. analog input card and 2 nos. analog output card.

Supply, Installation, Testing & Commissioning of Two-Way 6.5” Coaxial Ceiling Loudspeaker with Extended Bass ,Frequency Range (-10 dB): 55 Hz – 20 kHz, Frequency Response (± 3 dB): 75 Hz – 17 kHz, Power Capacity: 150W Continuous Program Power, Nominal Sensitivity : 91 dB , Nominal Coverage Angle : 120° conical coverage, Rated Maximum SPL :110 dB @ 1 m (3.3 ft) average, 116 dB peak, Rated Impedance 8 ohms (in bypass mode) ,Transformer Taps 60W, 30W, 15W, (& 7.5W @ 70 V) , NFPA90 & NFPA 70 rated , LF Driver: 165 mm (6.5 in), HF Driver : 25 mm (1 in)

Supply, Installation, Testing & Commissioning of Two-Way 6.5” Coaxial Ceiling Loudspeaker ,Frequency Range (-10 dB): 62 Hz – 20 kHz, Frequency Response (± 3 dB): 96 Hz – 15 kHz, Power Capacity: 100W Continuous Program Power, Nominal Sensitivity : 91 dB , Nominal Coverage Angle : 110° conical coverage, Rated Maximum SPL :108 dB @ 1 m (3.3 ft) average, 116 dB peak, Rated Impedance 8 ohms (in bypass mode) ,Transformer Taps 30 W, 15 W, 7.5 W @ 70V or 100V , NFPA90 & NFPA 70 rated , LF Driver: 165 mm (6.5 in), HF Driver : 19 mm (0.75 in)

Supply, Installation, Testing & Commissioning of Compact Two-Way wall mount loudspeaker with 5.25" LF Driver, Frequency Range (-10 dB): 60 Hz – 20 kHz; Frequency Response(+/-3 dB): 85 Hz – 17 kHz; Senstivity: 90dB, Maximum SPL: 110dB; 70V/100V Taps: 30W, 15W, 7.5W; Power Rating (IEC): 75W 100 hrs; Nominal Impedance: 8 ohms; Coverage Pattern: 100º x 100º ; LF Driver: 135mm (5.25in), HF Driver: 19mm (0.75in); Environmental: IP-44 per IEC529 it should be supplied with outdoor protected grill with IP55 rating

Supply, Installation, Testing & Commissioning of 2-Way Loudspeaker System with 1 x 15” LF, Rotatable waveguide for vertical or horizontal orientation Bi-Amp/Passive Switchable, Frequency Range : 35 Hz - 20 kHz, Coverage Pattern : Horizontal (80 to 90 degree), Vertical (40 to 50 degree), Passive Crossover Frequency: 2 kHz, Transducer Power :LF (2000 W peak) , HF (160 W peak),Nominal Impedance: 6 to 8 ohms, Maximum SPL HF:137 dB peak , Passive mode:130 dB peak, System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL, Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing, should support Suspension from ceiling with all accessories , provided by same speaker OEM

Supply, Installation, Testing & Commissioning of 2‐Way Loudspeaker, Shall have Frequency Range: 58 Hz - 20 kHz (-10 dB), Frequency Response: 68 Hz – 19 kHz (±3 dB) , Coverage Pattern- 120° x 60° , System Sensitivity (dB-SPL, 1W @ 1m)-92 dB, Maximum SPL: 113 dB, Nominal Impedance: 8 Ohms, Power Handling (Programme):500W

Supply, Installation, Testing & Commissioning of 18 in. High Power Subwoofer, Frequency Range : 28 Hz – 1 kHz, Frequency Response (±3 dB): 35 Hz – 1 kHz,Transducer Power : 4800W peak, Maximum SPL :135 peak, System Sensitivity (dB-SPL, 1W @ 1m) :98dB ,Capable to support Suspension Attachment, "Grille: Powder coated 14 gauge perforated steel, with acoustically transparent, black foam backing", Nominal Impedance: 8 ohms, LF Driver Size " 18 Inch

Supply, Installation, Testing & Commissioning of Two-Way 8-Inch Coaxial Ceiling Loudspeaker, Frequency Response (±3 dB): 80 Hz – 16 kHz ,Power Capacity (at low-Z) : 180 Watts Continuous Program Power , Nominal Coverage Angle : 90° conical coverage, Rated Maximum SPL: 112 dB @ 1 m (3.3 ft) average, 118 dB peak , Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting) ,Transformer Taps: 60 W, 30 W, 15 W @ 70V or 100V (plus 7.5 W @ 70V only) ,Crossover Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) highpass to HF driver Transducers: LF Driver 8",HF Driver: 25 mm (1.0 in) ,Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed

Supply, Installation, Testing & Commissioning of 8" In- High Ceiling Subwoofer, Frequency Range 32 Hz - 300 Hz, Sensitivity 95 dB, 70V/100V Taps 80W, 40W, 20W, Rated Maximum SPL: 115 dB Peak, Power Capacity: 200 Watts Continuous

Supply installation and fixing Audio / Dimmer Rack - 19 " - 36 U Rack, 600 mm wide with Aluminium frame and 1000 mm depth, top bottom side panel and rear door of CRCA Sheet size 1 mm, front door with Aluminium section and acrylic/glass sheets, with minimum specifications as specified in the tender

Supply installation testing commissioning of weatherized 2 way High Power Full range Bi-amp / Passive 1 X 15" or better loudspeaker as per approved make with minimum specifications as specified in the tender.

Supply installation testing commissioning of weatherized 2 way Full range Passive 1X12" or better surround loudspeaker as per approved make with minimum specifications as specified in the tender.

Supply installation testing commissioning of High Output 2X15" or better Subwoofer as per approved make with minimum specifications as specified in the tender

Supply installation testing and commissioning of 4’’/5.25" 2 way Monitor speakers with volume control supplied with OEM wall mount kit minimum specifications as specified in the tender.

Supply, installation testing and commission of four channel power amplifier delivering min 1250 W @ 4 Ohms as per approved make with minimum specifications as specified in the tender.

Supply, installation testing and commission of Eight channel power amplifier delivering min 600 W @ 4 Ohms as per approved make with minimum specifications as specified in the tender.

Supply, installation testing and commission of Dual channel power amplifier delivering min 2400 W @ 4 Ohms as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of Digital Signal Processor – with 12 analogue input & 8 analogue output with minimum specifications as specified in the tender

Supply installation testing and commissioning of Audio interface minimum 8 input & 8 output with minimum specifications as specified in the tender

Supply installation testing and commissioning of minimum 10 Watt Laser with minimum specifications as specified in the tender

Supply, Installation, Testing & Commissioning of DMX 512 controlled Laser housing with adjustable locking bracket, power supply to lights automatically turn off and Fan etc. with minimum rated IP 66. As per approved make with minimum specifications as specified in the tender

Supply installation testing and commissioning of IP65 Moving Head/Gobo lights of minimum 370 Watt or above having Beam, Spot & Wash mode with minimum specifications as specified in the tender

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 40-50 Watt as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 150-165 Watt as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX/RDM based linear light of minimum consumption of 80 Watt as per approved make with minimum specifications as specified in the tender.

Supply, installation, testing and Commissioning of 5 Channel 512 DMX Splitter with minimum specifications as specified in the tender.

Supply installation testing and commissioning of Personal Computer with interfaces as per the technical specifications PC with flat screen 27” display screen complete with keyboard mouse etc. for Lighting/Laser with minimum specifications as specified in the tender.

Supply, installation, testing and commissioning of weatherised enclosure for projectors. Enclosure should be complete with cooling mechanism and temperature sensors.

Supply, Installation, Testing & Commissioning of projection screen measuring 35m x 12m mounted on two MS structural poles. The screen to be pulleyed up via a conveyer belt at the time of the show via necessary hardware. The sheet material to be weather proof outdoor material, proper provisioning of housing of screen should be made when not in use.

Supply Installation Testing & Commissioning of Media Server with 5 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 16GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of Media Server with 3 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 16GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of Media Server with 4 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 16GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of Media Server with 1 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 4GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of Media Server with 1 HD outputs as required with original OS license - Intel CPU i5 Latest Generation having 4GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of Media Server with 2 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 8GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack

Supply Installation Testing & Commissioning of drones of nano category with 15 minutes Fly Time, LED lights 400 watts, Total Charge Time<=45 Mins per battery, Two batteries to be included

Drone charger to charge >= 50 batteries

Supply Installation Testing & Commissioning of kinetic installation having 4 concentric circles of diameter in descending order 1st ring- 7945mm, 2nd ring- 6145mm, 3rd ring - 3900mm and 4th ring - 1385mm with 1st dia to have 50 RGB lights, 2nd to have 40 RGB lights, 3rd to have 25 RGB lights and 4th to have 9 RGB lights. All the RGB lights should be interconnected and should have capability to translate in the horizontal axis of mount. The dimension of 1 RGB light is 150mm x 450mm with provision of 360 rotation along its center axis. The spacing between each block should be planned to create seamless RGB display and at the same time maintain proper space for the movement of the block. The movement of all the blocks should be in sync to create smooth transitions. All mounting, clamping, wiring, server and truss to suspend lights should be covered under the pricing.

Supply Installation Testing & Commissioning of kinetic installation having 9 concentric circles of diameter in descending order 1st ring- 4250mm, 2nd ring- 3840mm, 3rd ring - 3430mm, 4th ring - 3020mm, 5th ring - 2610mm, 6th ring - 2200mm, 7th ring - 1790mm, 8th ring - 1380mm and 9th ring - 970mm with 1st dia to have 58 RGB lights, 2nd to have 50 RGB lights, 3rd to have 44 RGB lights, 4th to have 38 RGB lights, 5th to have 34 RGB lights, 6th to have 28 RGB lights, 7th to have 21 RGB lights, 8th to have 15 RGB lights and 9th to have 7 RGB lights. All the RGB lights should be connected to winches and should have capability to translate in the vertical axis of mount. The dimension of 1 RGB light is 50mm x 75mm suspendedwith a 450mm length of vertical support. The spacing between each block should be planned to create seamless RGB display and at the same time maintain proper space for the movement of the block. A timeline based programming software should be provided with lifetime license that can program the movement of each block in a vertical direction. The movement of all the blocks should be in sync to create smooth transitions lift height to be minimum of 1100mm and maximum of 3750mm. There should be provision of lifting a human cut out base mounted with 32 X 15 = 480 arrows in vertical direction of mount, with a lifting height of 300mm, both the arrows mounted on top & on the human cut out should be able to translate together based on the animation/formation. . All mounting, clamping, wiring, server, linear actuators, control board and truss to suspend winches should be covered under the pricing.

Supplying, Installation, testing & commissioning of Controller to control vertical movement of screen along with mechanism, motor, bracket, HDMI to CAT6 & CAT6 to HDMI converter.

Supply Installation Testing & Commissioning of Laptop with i7 Processor latest generation having 4 GB Ram, 256 GB SSD, 1 X Ethernet port, 2 X USB 2.0 port, 16 inch Touch Screen or more

Supply, Installation, testing & commissioning of curved LED screen LS-FM-P2.5-1.28mx1.76m-12sets Customized Curve Shape, Pitch 2.5mm, Flexible LED Module ,Screen size 1.28*1.76m*12sets Resolution, 6144*704pixel , Front service, Steel cabinet. Control box V x 16, P 2.5 LED module, 300W power supply and NOVA receiving card. Any cables, processor,controller accessories required for installation should be included in the cost. Certification: BIS, FCC, CE Variation of +-5% allowed in overall area of display.

Supply, Installation, testing & commissioning of cylinder LED display of LS-FM-P2.5-3.2mx4m-4sets Customized Cylinder shape Pitch 2.5mm, Flexible LED Module, Cylinder diameter 1.019m Screen size 3.2*4m*4sets Resolution 1280*1600pixel*4sets Front service, Steel cabinet. Control box V x 6, LED module P 2.5, 300W power supply and nova receiving card. Any cables, processor,controller accessories required for installation should be included in the cost. Certification: BIS, FCC, CE Variation of +-5% allowed in overall area of display.

Supply, Installation, testing & commissioning of active LED video wall along with processor with pixel pitch of 1.50 mm or less, LED Solution should have Open Frame Design with External Power Supplies to support Customised Cylindrical Shape in the Form of Tree trunk and Branches. LED Module Size: 240mm x 180mm, Flexible LED Modules Should Support upto 1000R Curvature. External Power Supplies should be rack mountable at distance upto 60m with hot swappable power redundancy provision. All Power supplies, Receiving Cards/ Controllers should be of High Quality and orginal of Same OEM. Total Screen Area(minimum): Width 3840 mm X Height 2150 mm, 1000 nits or more brightness, Minimum 16 bit processing, Full front & Back serviceability Capability, >5000:1 contrast or more, Refresh rate of 3840 Hz or more, LED life: 100000 Hrs or more, UHD LED Controller cum Processor & LED Screen Should be from same make & should have calibration, Digital Signage & remote monitoring facility. Any cables, accessories required for installation should be included in the cost. Original LED Screen OEM's LED Calibration and Digital Signage Software to be Provided for Full Functioning. Certification: BIS, FCC, CE Variation of +-10% allowed in overall area of display.

Supply, Installation, testing & commissioning of active LED video wall along with processor with pixel pitch of 1.26 mm or less, LED Solution should be made with Cabinets with Internal Signal Cabling and Power connectivity between Cabinets. Total Screen Size: Width 1800 mm X Height 1700 mm, 600 nits or more brightness, Minimum 16 bit processing, Full front serviceability Capability, >=7000:1 contrast or more, IP5X front and Rear Protection, LED life: 100000 Hrs or more, UHD LED Controller cum Processor & LED Screen Should be from same make & should have calibration, Digital Signage & remote monitoring facility. LED wall should be supplied with LED Configuration Software from Original OEM. Any cables, accessories required for installation should be included in the cost. Original LED Screen OEM's LED Calibration and Digital Signage Software to be Provided for Full Functioning.Certifications to be Submitted: BIS, FCC, CE Variation of +-10% allowed in overall area of display.

Supply, Installation, testing & commissioning of active LED video wall along with processor with pixel pitch of 1.57 mm or less, LED Solution should be made with Cabinets supporting 90degree / L Shape Seamless Installation to Form Cubical LED Screen. LED Cabinets should have 40mm or Less Depth , Total Screen Size: Width 4800 mm (1200mm each Side x 4) X Height 1350 mm, 800 nits or more brightness, Minimum 14 bit processing, Full front serviceability Capability, >5000:1 contrast or more, Refresh rate of 3840 Hz or more, LED life: 100000 Hrs or more, UHD LED Controller cum Processor & LED Screen Should be from same make & should have calibration, Digital Signage & remote monitoring facility. Any cables, accessories required for installation should be included in the cost. Original LED Screen OEM's LED Calibration and Digital Signage Software to be Provided for Full Functioning.Certifications to be Submitted: BIS, FCC, CE Variation of +-10% allowed in overall area of display.

Supply, Installation, testing & commissioning of active LED video wall along with processor with pixel pitch of 1.27 mm or less, LED Solution should be made with Cabinets (Cabinets should be also in 16:9 aspect ratio), Size of Screen: As per Site (Square meter Price to be quoted), 500 nits or more calibrated brightness, Minimum 16 bit processing, 16:9 aspect ratio per tile, Full front serviceability, IP 30 front and IP 60 for rear, 5000:1 contrast or more, 97% uniformity, Refresh rate of 3000 Hz or more, LED life: 100000 Hrs or more, Flip chip RGB LED, UHD LED Controller cum Processor & LED Screen Should be from same make & should have calibration, Digital Signage & remote monitoring facility, LED wall should be supplied with LED Configuration SOFTWARE from Original OEM. BIS Certification to be submitted. Any cables, processor, controller accessories required for installation should be included in the cost. Failure of power supply inside the tile should not affect the functioning of the tile. Variation of +-10% allowed in overall area of display.

Printer for takeaway prints with cartridge in Interactive gita

Supply, Installation, Testing & Commissioning of Projector DLP, 1920X1200 native solution, min. 10,000 -12000 ANSI lumens , laser phosphor digital projector with minimum 20,000 hours light source, Contrast Ratio : minimum 10,000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and UST lens 0.38 Any cables, mounting, accessories required for installation should be included in the cost.

Supply, Installation, Testing & Commissioning of Projector DLP, 1920X1200 native solution, min. 10,000 -12000 ANSI lumens , laser phosphor digital projector with minimum 20,000 hours light source, Contrast Ratio : minimum 10,000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and ST lens 0.75 - 0.93 Any cables, mounting, accessories required for installation should be included in the cost.

Supply, Installation, Testing & Commissioning of Projector DLP, 1920X1200 native solution, min. 12,500 -14500 ANSI lumens, laser phosphor digital projector with minimum 20000 hours light source, Contrast Ratio : minimum 10000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts with thirdparty fish eye lens of focal length 3.00 mm .Any cables, mounting, accessories required for installation should be included in the cost.

Supply, Installation, Testing & Commissioning of projector 1 chip DLP, WUXGA resolution, 18,500-20500 ANSI lumens laser phosphor digital projector with minimum 20000 hours light source, Contrast Ratio : minimum 10000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and LT 0.9-1.02 lens. Any cables, mounting, accessories required for installation should be included in the cost.

Supply, Installation, Testing & Commissioning of projector 1 chip DLP, WUXGA resolution, 18,500-20500 ANSI lumens laser phosphor digital projector with minimum 20000 hours light source, Contrast Ratio : minimum 10000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and LT 4.0-7.0 lens. Any cables, mounting, accessories required for installation should be included in the cost.

Supply, Installation, Testing & Commissioning of projector 3 chip DLP, WUXGA resolution, 28,000-30,000ANSI lumens, laser phosphor digital projector with minimum 20000 hours light source, Contrast Ratio : minimum 2000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDbaseT,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and LT 4.6-7.4 lens Any cables, mounting, accessories required for installation should be included in the cost.

Supply Installation Testing, & commissioning of Videowall Panel Size 55 inch with Resolution of 1920 x 1080 (FHD) Brightness 500 cd/m2 or above, 500 nits to 700 nits, Contrast ratio 1100:1 & Dynamic / Mega 400,000:1,Bezel to Bezel 0.88mm GAP or less Viewing Angle (H x V) 178 x 178 , Orientation Portrait & Landscape, Input Ports HDMI -Minimum 1, DP - Minimum 1, DVI-D-Minimum 1 ,RJ45- Minimum 1,Built in/External Mediaplayer with Internal Minimum Memory 8GB Quadcore Processor,2 GB RAM or Higher configuration as required,Calibration facility,with required hardware and accessories as per design and drawing directed by Architect Consultants.Certificates - BIS

Supplying, Installation, testing & commissioning of 88 inch LCD (Stretched: 2 X 7 Feet) -Back Lit LED,Resolution-3840*1080 , Aspect: 32:9, Landscape & Vertical Support ,Brightness - 700 nits or Higher,Contrast Ratio -1100:1 & Dynamic/Mega Contrast 500,000:1,Anti Glare Treatment on Surface, Input ports -HDMI(3)DP(1),DVI-D(1),LAN Port (1),USB(1),Output Port-DP(1) Display Should support central controlling through SNMP,Wake on LAN, Inbuilt Media Player (Quadcore Processor,2 GB RAM, 8GB Standard Memory or Higher), Certificates -UL/NRTL,FCC,BIS. Price to be inclusive of accessories, mounting, cabling etc.

Supplying, Installation, testing & commissioning of 32 inch LCD -Back Lit LED, Resolution 3840 x 2160 (UHD) or 4K,Built inTouch IR/Inglass/Capacitive/Incell, Brightness - 350 - 500 nits or Higher,Anti Glare Treatment on Surface, Input ports -HDMI(2),LAN Port (1),USB(1), Certificates -UL/CE,BIS with extension to connect touch & display interface to the server placed in server room.Price to be inclusive of accessories, mounting, cabling etc.

Supplying, Installation, testing & commissioning of 55 inch LCD -Back Lit LED, Resolution 3840 x 2160 (UHD) or 4K,Built inTouch IR/Inglass/Capacitive/Incell, Brightness - 350 - 500 nits or Higher,Anti Glare Treatment on Surface, Input ports -HDMI(2),LAN Port (1),USB(1), Certificates -UL/CE, FCC,BIS with extension to connect touch & display interface to the server placed in server room.Price to be inclusive of accessories, mounting, cabling etc.

Supplying, Installation, testing & commissioning of 32 inch FHD -Back Lit LED,Resolution-1920 * 1080 or more, 350 nits or Higher,Anti Glare Treatment on Surface, Input ports -HDMI(2),LAN Port (1),USB(1),10W speakers (2), Certificates -BIS. Price to be inclusive of accessories, mounting, cabling etc.

Supplying, Installation, testing & commissioning of 55 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher,Contrast Ratio -1100:1, Anti Glare Treatment on Surface, Input ports -HDMI(3), DP(1)/DVI-D(1),LAN Port (1),USB(1),Output Port-DP/HDMI. Certificates -UL/CE, FCC,BIS. Price to be inclusive of accessories, mounting, cabling etc.

Supplying, Installation, testing & commissioning of 85 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher,Contrast Ratio -1100:1, Anti Glare Treatment on Surface, Input ports -HDMI(2), DP(1)/DVI-D(1),LAN Port (1),USB(1),Output Port-DP/HDMI Display Should support central controlling through SNMP with extension to connect display interface to the server placed in server room. Price to be inclusive of accessories, mounting, cabling etc. Certificates -BIS

Supply, Installation, Testing & Commissioning of Tablet >=12 inch , Super AMOLED Display, upto 120 Hz, Resolution 2800 x 1752 (WQXGA+ ) >=10000 mAh battery with 45W Type-C fast charger in the box 6GB RAM, 128GB Storage, Octa-Core processor

Operation & Maintenance (1st year) Head of Operations - 1 nos Senior Engineer - 1 nos Engineer/Operations - 4 nos Registration and Ticketing - 2 nos Museum Guide - 6 nos Housekeeping - 6 nos Drone Show Operator(Agency) - 1 nos Security Guard - 6 nos Live Performances as per 6.2.7 - 1 show

Operation & Maintenance (2nd year) Head of Operations - 1 nos Senior Engineer - 1 nos Engineer/Operations - 4 nos Registration and Ticketing - 2 nos Museum Guide - 6 nos Housekeeping - 6 nos Drone Show Operator(Agency) - 1 nos Security Guard - 6 nos

Operation & Maintenance (3rd year) Head of Operations - 1 nos Senior Engineer - 1 nos Engineer/Operations - 4 nos Registration and Ticketing - 2 nos Museum Guide - 6 nos Housekeeping - 6 nos Drone Show Operator(Agency) - 1 nos Security Guard - 6 nos

Operation & Maintenance (4th year) Head of Operations - 1 nos Senior Engineer - 1 nos Engineer/Operations - 4 nos Registration and Ticketing - 2 nos Museum Guide - 6 nos Housekeeping - 6 nos Drone Show Operator(Agency) - 1 nos Security Guard - 6 nos

Operation & Maintenance (5th year) Head of Operations - 1 nos Senior Engineer - 1 nos Engineer/Operations - 4 nos Registration and Ticketing - 2 nos Museum Guide - 6 nos Housekeeping - 6 nos Drone Show Operator(Agency) - 1 nos Security Guard - 6 nos

Meroform India Pvt. Ltd