ELECTRICAL WORK

Amount

Providing & fixing of fire huts for keeping various type fire equipments. The work involves as below :- Fabrication of 02 Nos. 3.0 mtr long and 06 Nos. 2.5 mtr long vertical shape support form 65x65x5 mm GI angles and welding the piece of 10 cm Angle from 65x65x5 mm in the bottom of support. Elevation of 08 Nos. pits of size 20x20x20 cm and concreting of 08 No. vertical support with ratio of 1:2:4 of cement core sand and 20 mm stone ballast in proper level and alignment. Fabrication of top structure from 50x50x5 mm or 65x65x5 mm GI angles having the size of 3.0, 2.5, 1.2 & 4.0 mtr GI angle piece as per equipment. Welding these pieces on vertical support to make the frame of hut type. Painting the structure with two coats or red colour synthetic enamels good quality paint. Supply and fixing of 6.0 mm thick gray color corrugated asbestos roofing in position with MS "J" nuts and Bolts including supply of required material, labors and T&P etc. Flooring the complete hut by first class brick work in ratio 1:4 of cement and core sand with 12 mm thick plaster in ratio 1:4 of cement and core sand including these supply of related material and labor and T&P etc. (GI angle iron will be provided by UPPTCL free of cost.)

Providing and fixing of fire bucket stand hut type made of M.S angle iron of size 35x35x5 mm having arragement for hanging 08 Nos. buckets with suitable hook made of M.S round bar of 12 mm dia. The stand should be covered with M.S sheet of 18 SWG. The stand should be duly painted with post office red colour paint after properly rubbing & cleaning. Fire and vkx should be written by white enamel paint on both side of side of stand roof as per techncial specification & sample.

Providing and fixing of fire bucket made of 20 gauge G.I sheet with round bottom having 02 handles I at the top and another at the site of bucket for easy throwing of sand/water duly painted with two coats of post office red enamel paint and white shade painted inside the bucket. The work vkx /Fire shall be written with paint in size not less than 75 mm long. The bucket shall be conforming to IS 2546 having 09 Ltr capacity.

OHM ENTERPRISES AND ENGINEERS

msn construction company