Repair of Sofa Set and Misc items of furniture at Faridkot Mil Stn

Amount

SOFA SET 4/5 SEATER: FD-281 : Removing of old unserviceable part of sofa set 5 seater and providing the same with new components of Ist Class Seasoned wood duly finished and french polished all as per drgs and as specified and as directed by Engr-in-Charge:- Legs all as specified and shown on drawing.

All as per ser Item No 1 here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long

All as per ser Item No 1 here-in-before but Side rail of size 35mmx100mm in section of 500mm long

All as per ser Item No 1 here-in-before but 50mmx20mm wooden battens of 500mm long

All as per ser Item No 1 here-in-before but back Rail all as specified and shown on drawing.

All as per ser Item No 1 here-in-before but Removing of old unserviceable cushion foam seat and back & S&F of new cushion in the size of 21"x22"x4" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set 4/5 seat Make : Sleepwell/Feather Foam / Kurlon Cushion.

All as per ser Item No 1 here-in-before but removing of old unserviceable tapestry cloth from cushion seat Supply and fixing new tapestry cloth. Rate not less than 250/- per mtr with best upholstery to seat of sofa set.

All as per item No 1 here-in-before but M & L for polishing to complete sofa set 5 seater after preparation of smooth surfaces complete all as specified and directed.

All as per item No 1 here-in-before but M & L for polishing to complete sofa set 4 seater after preparation of smooth surfaces complete all as specified and directed.

STOOL DRESSING WITH CUSHION (FD-374) : Removing old Unsv existing dunlop cushion seat and supply and fixing new dunlop cushioned seat of hard variety complete all as specified and shown on drg.

All as per ser Item No 10 here-in-before but removing old unsv side and supply and fixing new side made out of prelaminated particle board 18mm thick exterior grade complete all as specified and shown on drg.

TABLE BED SIDE (MAP) : FD/E6/MAP/15 (R) : Dismantling of existing Unsv parts of Table Bed Side (MAP) . Supply and fixing of new top made out of pre-laminated particle board 18 mm thick exterior grade with 4 mm thick teakwood beading alround the top complete all as specified and shown on drg.

All as per ser Item No 12 here-in-before but bottom.

All as per ser Item No 12 here-in-before but sides.

All as per ser Item No 12 here-in-before Gas welding of broken spot of Table Bed Side frame 8mm MS square pipe complete all as specified and directed by Engineer-in-Charge.

All as per ser Item No 12 here-in-before but Removing existing unsv handle and supply and fixing new mild steel powder coated handles 100mm long for drawer complete all as specified and directed by Engineer-in-Charge.

All as per ser Item No 12 here-in-before Provide PVC hard rings at the bottom of legs instead of hard rubber rings complete all as specified and directed by Engineer-in-Charge.

All as per ser Item No 12 here-in-before but Removing old unsv back ply and supply and fix 6 mm thick commercial plywood with headless nails of Table bed Side (Map).

Side Board (FD-1112) : Dismantling of old unsv parts of side board. Supply and fixing new top made out of pre-laminated particle board 18 mm thick Exterior grade complete all as specified and shown on drg.

All as per ser Item No 19 here-in-before but Shutter.

All as per ser Item No 19 here-in-before but sides.

All as per ser Item No 19 here-in-before but back of drawer.

All as per ser Item No 19 here-in-before but front of drawer.

All as per ser Item No 19 here-in-before but shelf.

All as per ser Item No 19 here-in-before but removing old unsv oxidized piano type hinges and supply and fixing new piano type hinges confirming to IS-3818 fixed with steel screw 15 mm long of side board.

All as per ser Item No 19 here-in-before but removing existing unsv handle and supply and fixing new mild steel powder coated handles 100 mm long for door shutter and drawer complete all as specified and directed by Engr-in-Charge.

All as per ser Item No 19 here-in-before but removing existing unsv ball catcher and supply and fixing new magnetic catcher fixed on top and bottom edge of the shutter of side board. Make : Atul or equalent.

All as per item No 19 here-in-before but M & L for polishing to complete side board after preparation of smooth surfaces complete all as specified and directed.

CHAIR DINING LONG BACK WITH CUSHION FD/MAP-II/04 :-Dismantling of existing unserviceable rear leg & S&F new rear leg of Ist class seasoned wood without damaging other adjacent parts of chair dining long back with cushion all as specified and shown on drawings.

All as per Srl items No 29 here-in-before but front leg complete all as specified and directed and as shown on drawings

All as per Srl items No 29 here-in-before but side rail complete all as specified and directed and as shown on drawings

All as per Srl items No 29 here-in-before but front rail complete all as specified and directed and as shown on drawings

All as per Srl items No 29 here-in-before but back rail of seat complete all as specified and directed and as shown on drawings

All as per Srl items No 29 here-in-before but centre stiffener complete all as specified and directed and as shown on drawings

All as per ser No 29 here in before but Removing of old unserviceable cushionfrom seat and S&F of new cushion in the size of 18"x18"x75mm of density 40 which shall be covered with superior quality Leatheriest rexene with best upholstery to seat of chair dining. Make: Sleepwell/feather foam /Kurlon Cushion

All as per item No 29 here-in-before but M & L for polishing to complete chair after preparation of smooth surfaces complete all as specified and directed.

TABLE DRESSING LADIES FD-251 & FD-32(M) :-Dismantling of old unserviceable ply wood from back of mirror and S&F new plywood 6mm thick commercial BWR quality of mirror frame as complete all as specified and shown on drg.

All as per Srl items No 37 here-in-before but Dismantling of old unserviceable drawer S&F new drawer of 12mm thick prelaminated particle board with knob 37mm dia all as specified and shown on drg.

All as per Srl items No 37 here-in-before but Dismantling of old unserviceable legs and S&F new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing.

All as per Srl items No 37 here-in-before but Dismantling of old unserviceable glass shutter and S & F new glass shutter of 5mm thick as required size complete all as specified and shown on drg.

All as per Srl items No 37 here-in-before but Dismantling of unserviceable frame of looking mirror and S&F New frame 20mm x 25mm of Ist class seasoned wood in section made to shape as shown on drawing and 12mm x 12mm in section teak wood beading shall be provided at the back complete all as specified directed and shown on drawing.

All as per Srl items No 37 here-in-before but Dismantling of unserviceable knob of table dressing ladies and S&F new knob of aluminium anodized of size 25mm dia with nut & washer complete all as specified and shown on drawing.

All as per Srl items No 37 here-in-before but Dismantling of old unserviceable looking mirror and S&F new looking mirror size 366x1220x5mm thick of Modiguard/Atul complete all as specified and shown on drg

All as per item No 37 here-in-before but M & L for polishing to complete Table dressing ladies after preparation of smooth surfaces complete all as specified and directed.

CHAIR DINING FD/MAP-II/05 :- Dismantling of existing unserviceable rear leg & S & F new rear leg of Ist class seasoned wood without damaging other adjacent parts of chair dining complete all as specified and shown on drawings

All as per Ser item 45 here-in-before but front leg complete all as specified and directed and as shown on drawings

All as per Ser item 45 here-in-before but side rail complete all as specified and directed and as shown on drawings

All as per Ser item 45 here-in-before but front rail complete all as specified and directed and as shown on drawings

All as per Ser item 45 here-in-before but side stiffner complete all as specified and directed and as shown on drawings

All as per Ser item 45 here-in-before but centre stiffener complete all as specified and directed and as shown on drawings

All as per item No 45 here-in-before but removing of old UNSV plastic seat and S&F new PVC seat 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick with holes and weight of the PVC seat is not less than 0.50 kg. Make: Brite/Amco/Swastik.

All as per item No 45 here-in-before but M & L for polishing to complete chair after preparation of smooth surfaces complete all as specified and directed.

CHAIR CUSHIONED WITH ARMS (7112) (TP):- Removing of unserviceable cushion seat and back with upholstered tapestry cloth and PVC beading and providing new material in superior quality and providing in serviceable condition duly repaired in all respect complete all as specified and directed and as shown on drawings.

All as per item No. 53 here-in-before but replacing of unserviceable Arms handle made of ply propylene, co-polyme complete all as specified and directed and as shown on drawings

All as per item No. 53 here-in-before but M & L for preparation of old painted surfaces of chair cushioned with arms and applying one coat of synthetic enamel paint (black colour) on chair cushioned with arms complete all as specified and directed and as shown on drawings Make of paint : Shalimar/Nerolac/Asian/Berger

CHAIR SCHOOL WITH HARD BOARD (FD/E6MAP/05) : Dismantling of old unserviceable leg and S & F new leg of 25mm dia round tube of 1.6mm wall thickness welded by Gas/ Electric welding complete all as specified and shown on drg.

All as per ser Item No 56 here-in-before but Dismantling of old unserviceable top and S & F new top of 18mm thick Block board commercial covered with plastic laminated sheet 1.00mm thick teak face including 4mm thick teak wood beading all round complete all as specified and shown on drawing.

All as per ser Item No 56 here-in-before but Dismantling of old unserviceable seat / back of chair and S & F new seat/back made ply propylene, co-polymer weight not less than 1.2 Kgs moulded as shown on drgs, back shall be monolithic complete all as specified and shown on drawing. Make : Blow Pan/ Nilkamal

All as per ser Item No 56 here-in-before but removing of old unserviceable shoe and S & F new shoe of PVC/Hard rubber shoe at bottom of the leg complete all as specified and shown on drawing.

All as per ser Item No 56 here-in-before but Gas welding of broken spot of 25mm round pipe of chair school with hard board complete all as specified and shown on drawing. Note : Welding alround shall be considered one point

All as per ser Item No 56 here-in-before but M & L for denting and painting of steel surfaces exposed to view when placed in position and applying two coats of synthetic enamel black paint after preparation of old surfaces complete all as specified and shown on drawing.

CHAIR VARANDAH (FD/MAP/12) Removing of old unserviceable plastic seat and back and S & F new PVC seat 4 x 10mm thick ribs moulded. PVC sheet 4mm thick and weight of PVC seat and back is not less than 1.85 Kg complete all as specified and shown on drawing. Make : Brite / Amco / Swastik / Comfo

Gas welding of broken spot of 20mm round pipe of chair varandah complete all as specified and directed by Engineer in Charge. Welding alround consider one point.

M&L for preparation of old painted surfaces of chair verandah and applying one coat of Snythetic Enamel paint (white colour) on chair verandah complete all as specified and directed by engineer in Charge. Make: Shalimar/Nerolac/Asian

CHAIR COMPUTER (TP) : (a) Removing of unserviceable Cushion Seat, Padded Back with upholestered Leather/Tapestry Cloth, Padded cushion of Arms and providing New materials in superior quality and repair/removing of unsv parts of tiltting Mechanisam with whell system and providing in serviceable condition duly repaired in all respect as directed by Engr-in-charge.

All as per ser Item No 65 here-in-before but Replacing of bearing of revolving chair

All as per ser Item No 65 here-in-before but Replacing of unsv wheel Make: Johnson/Godrej/ Bellveen

All as per ser Item No 65 here-in-before but Replacing Hydrolic fitting as directed by GE/Engr-in-charge

All as per ser Item No 65 here-in-before but Replacement of Base assembly of chair computer as exsiting and as directed by GE

RECANNING OF CHAIR VERANDAH FD-256, 19(M) Removing of old existing unserviceable cane/nylon newar from chair varandah and recanning with new plastic cane 4.00mm wide half round in white/yellow colour complete all as specified and shown on drawing. Make of cane shall be Shah brand/Premier.

Gas welding of broken spot of 20mm round pipe of chair varandah complete all as specified and directed by Engineer in Charge. Welding alround consider one point.

M&L for preparation of old painted surfaces of chair verandah and applying one coat of Snythetic Enamel paint (white colour) on chair verandah complete all as specified and directed by engineer in Charge. Make: Shalimar/Nerolac/Asian/Berger Note :- A Sum of Rs. 14,470.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 25 (Schedule of credit) of Tender Documents.

GILL ENTERPRISES

M/s NIRMAN BUILDERS