PROVISION OF 01 NUMBER BADMINTON COURT AT NAD SUNABED UNDER GE (P) NAVY VISAKHAPATNAM

Amount

SCHEDULE 'A PART-I (B/R WORKS) M&L for Surface dressing n exc 15 cm deep for adjoining area Hard/dense soil complete all as specified and directed.

M&L for excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth in hard/dense soil complete all as specified and directed.

M&L for removing excavated soil upto a distance exc 50 m but not exc 100 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.

M & L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundations filling, bed concrete and mass concrete complete all as specified and directed.

M&L 100 mm thick cement concrete (1:2:4), type B-1 (20 mm graded aggregate) as in sub base, floors, Hardstanding etc. finishing even & fair complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100 mm thick slab complete all as specified and directed.

M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'A' complete all as specified and directed.

M&L for Mild steel hand rails, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete .

M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for RCC 1:1½:3 (nominal mix) using 20 mm dia graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any) for foundation and plinth beams etc, vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L for Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

M&L for Mild steel bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

-ditto All as per Item No. 16.00 but plain sheet

M&L for structural steel work Fe 410-W (Gde-E-250) quality-A in roof trusses (framed), trussed, purlins, crane gantries, rials and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-A complete all as specified and directed.

S&F mild steel Plates (plain or chequered) 5mm thick or over in thickness in available sizes of grade Fe-410-W (Gde E-250) including necessary welding complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long, diameter 11 to 15 mm complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and as directed.

S&F Tubular towel rail, 'D' type 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-1111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 or equivalent model in KOHLER / MARC / CRABTREE)

M&L for 2nd class hardwood, plain solid, straight chowkhats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together, with glue, pinned at joints including tarring back of chowkhat/frame complete all as specified and directed.

M&L for 2nd class hardwood factory made, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces of thickness 35 mm The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified and directed.

S&F 35mm thick Factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.(with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) fitted to chowkhat complete all as specified and directed.

S&F 30mm thick factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.divided into squares, with plain chamfered or rounded, miitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) complete all as directed.

S&F for Aluminium anodised barrel tower bolts of extruded sections, 150 mm long complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overal length of cover plate 150 mm complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, aluminium (extruded section) body, suitable for door shutters of 701 to 850 mm in width & weight between 36 to 60 kg complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, with length of bolt 300 mm complete all as specified and directed.

S&F of USFS synthetic PVC vinyl flooring mat 7 mm thick, Green clolur, Three layer for badminton court including game lines marking, pattern sand finish, specification as per BWF standards complete all as specified and directed. Make : SMI/ Dongxing or equivalent as per BWF approved company.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded aggregates) as in sub-floor, sub base, floors and paving etc., complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L providing precast cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate), solid blocks exc 10 cm thick set in cement mortar 1:4 complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block with grey cement and pigmnent of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

SCH 'A' PART-II ( ELECTRIFICATION WORKS) M&L for point wiring with PVC insulated, PVC unsheathed FR cable, single core, stranded, copper conductor cable 1.5 sqmm size, drawn in and including Non metallic rigid PVC conduit 20mm dia with all accessories concealed type and including PVC unsheathed FR cable , 1.5 sqmm stranded copper cable (green insulation) for continuous earth wire and including pressed steel concealed terminal boxes of required size of 2 mm thick, covered with 3 mm thick plastic laminated bakalite sheet, ISI marked for the following :-

One light point or fan/Exhaust Fan point controlled by one switch

One point for socket outlet 5 amp same board

One 3 pin socket outlet, 5 amps, independent

One 3 pin socket outlet, 15 amps. Independent , with cables 2.5 Sqmm size copper conductor cable with continuous earth wire of 1.5 sqmm copper conductor on independent board.

S&F metal flush box 8 module complete as directed

S&F metal flush box 4 module complete as directed .

S&F metal flush box 3 module complete as directed.

S&F metal flush box 2 module complete as directed.

S&F modular cover plate with frame 8 Module complete as directed .

S&F modular cover plate with frame 4 Module complete as directed.

S&F modular cover plate with frame 3 Module complete as directed .

S&F modular cover plate with frame 2 Module complete as directed.

S&F modular switch 6 amps Single module complete as directed .

S&F modular switch 16 amps Single module complete as directed .

S&F modular socket 6 amps 5 pin socket Single Module complete as directed .

S&F modular socket 6/16 amp 3 pin combined Single Module complete as directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body for surface type, bakelite 65x50mm three terminal

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. (Make : Crompton/ Bajaj/ Havells/ Surya)

S&F air circulator wall fan, 600 mm sweep 230 volts with all accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed. (MAKE : HAVELLS, Turbo Force / CROMPTON GREAVES, Model : VORTEX SERIES /USHA, Model : DOMINAIRE /HALONIX, Model: KRYPTON or equivalent model in BAJAJ / ORIENT)

S&F Exhaust fan 450 mm sweep, 1400 RPM, heavy duty, AC Single Phase 230/240 volts, metal body with louvers and vents, long life span, durable finish, weather-resistant, corrosion-resistant, performance consistency, square or round as per site requirement complete with all accessories and connecting up including and PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 Core, 1100 Volts grade, from ceiling rose/ connector to fan, including necessary scaffolding, safety and protective measures at any height of building, complete all as specified and directed. (MAKE : HAVELLS, Model: Turbo Force Neo 1P / CROMPTON, Model: EXHD450-4-1 / USHA, Model No.450mm S. PHTURBOHDEF 1400 RPM ISI / Bajaj, Model: SKU70064 or equivalent model in ORIENT)

S&F Building security light LED street light fitting 70 watt, made up of pressure die cast aluminum housing with high power LEDs with secondary optics, IP66 protection, LED street light with poly carbonate cover including GI Bracket made out of 32 mm dia medium grade GI tube up to 1.5 m long bend to shape 115 degree off set shape, fixed with 2 nos of suitable MS Flat clame of size 40x6 mm with necessary nut bolts & washers and applying two coats of aluminum enameled paint over one coat of zinc oxide primer for clamp complete all as specified and directed. (Make : Havells Model No. ENDURA OMNIPLUS or equivillant as mention in Make list of PS Clause)

M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 5 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

S&F MCB DB, TPN, 4 Way, 415 Volts, sheet steel phospetised powder coated, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar 415V nautral link suitable for mounting MCBs, IP:43 protection complete all as specified and as directed

S&F MCB DB double door ,IP 43 protection single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar 240V natural link complete

S&F amp rating 240V, 10KA 'C' curve (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve (MCB) of TPN 40 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve (MCB) of SP 06 to 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded,galvanised steel strip armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, of 4 core 16 sqmm. on wall complete all as specified and directed.

S&F GI pipe light grade 50 mm bore including all fittings, laid across road in trenches, or across roads/PCC drain etc, along electric pole or floor / wall for cable protection complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm for soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L for dry sand cushioning/sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. ( NOTE: Punned thickness only shall be measured for payment )

Supply and laying of un-reinforced pre-cast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

M&L for cutting of road for laying of water tubing including returning filling and making good the disturbed surfaces with PCC 1:2:4 type B2 using 40mm graded aggregates, 100 mm thick, on top, finishing surfaces even and smooth without using extra cement complete all as specified and directed.

SHIKHARA PROJECTS (BID ID -3411270)

AYYAPPA CONSTRUCTIONS (BID ID -3411264)

M/s Jai Sree Hari (BID ID -3412214)