Construction of 1x3.0x2.0 mtr RCC box culvert in place of damaged culvert at Chhiblamau link road in km-2 Under Special repair

Dismentiling of existing structures like culverts,bridges,retaining walls and other structure comprising of masonry,cement concrete,wood work,steel work,including T&p and scaffolding wherever necessary,sorting the dismanted material,disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m asper Technical specification Clause 202. Including all material, labour & T&P with all taxes etc. complete but excluding GST

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3. Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing Concrete for plane/reinforcement concrete in open foundations complete as per drawings and technical specifications Clauses 802,803,1202 & 1203(P.C.C.1:3:6) Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing concrete for Plain/reinforced concrete in open foundations complete as per drawing and technical specifications clauses 802,803, 1202.& 1203.RCC Grade M-25 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications clauses 800, 1205.4 and 1205.5.RCC Grade M-25 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications clauses 1002, 1010 and 1202. Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia pvc pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications Clauses 614,709,1204.3.7 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Drainage Spouts complete as per drawing and Technical specification Clause 1209. Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Construction of embankment/Shoulder with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Supply of 1000 mm Dia MP-3 Hume pipe including cost of material- Cartage all Taxes labour T&P Complite Including all material, labour & T&P with all taxes etc. complete but excluding GST

Laying brick soling on prepared sub-grade with brick on end edging according to lines,graded and cross-section shown on the drawing filling joints with sand and earth,spreading 25 mm thick layer of earth over brick soling,watering and rolling the same with three wheeled road roller 80-100 kN as per Technical Specification Clause 412 Including all material, labour & T&P with all taxes etc. complete but excluding GST

Construction of granular sub-base by providing well graded material from Approved quarry, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing ,Laying ,spreading and compacting stone aggregates from Approved quarry of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing ,Laying ,spreading and compacting stone aggregates from Approved quarry of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density Including all material, labour & T&P with all taxes etc. complete but excluding GST

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm usingmannual means . Including all material, labour & T&P with all taxes etc. complete but Excluding cost of GST

Providing and applying tack coat with Bitumen V.G._10 using Bitumin pressure distributor at the rate of 0.30 kg per sqm on the prepared surface cleaned with hydraulic broom . Including all material, labour & T&P with all taxes etc. complete but Excluding cost of GST.

Providing, laying and rolling of open graded Premix Surfacing of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade VG-10 to required line, grade level to serve as wearing course on a previously prepared base, including mixing by H.M.P., laying and rolling with a smooth wheel roller 8-10 tonne capacity finished to required level and grades.(Material will be dumped at Thulendi H.M.P.) Including all material, labour & T&P with all taxes etc. complete but Excluding cost of GST.

Providing, laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grades and cross falls using type "C" seal coat including cost of material, labour, plant, mechinery and T&P, all labour etc. complete as per PWD specification.(Material will be dumped at Thulendi H.M.P.) Including all material, labour & T&P with all taxes etc. complete but Excluding cost of GST.