GE/ALP (8235B) KOLKATA OF 2023-24

Amount

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.(Make: Havells Cat No EBDURAOMNIPLUSSL70WLED757SASYTOPC.or equvalant in make Phillips / CROMPTON).

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete (Make: HAVELLS EBDURAOMNIPLUSSL120WLED757SASYTOPC.or equvalant in make Phillips / CROMPTON).

Material and labour for replacement of thermoplastic cable junction box with knockouts for cable entry upto 25 sqmm including minimum 4 terminals for terminating cables Cat No: K 9255 of make: Hensel or equivalent in make: Sintex including fixing arrangement by carefully cutting the bases of pole or post top lantern or other wise as indicated all as specified and as directed.

Supply and fixing Steel tubular swaged poles complet with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (8.5 metres long)

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp( Make: Crompton Cat No.LFL-70-CDL/60M or equvalant in makeof PANASONIC / Phillips /HAVELLS).

Labour only for checking of unserviceable street light fitting over poles, finding of faults and repair/ replacement of unserviceable spares like lamp, holder, ignitor, ballast, connector block etc and making the light functional in all respect including necessary tools reqd for repair all as specified and as directed. [Note: - (i) All the spares required for repair will be measured and paid under separate relevant item of this schedule as 'Supply only'. (ii) Necessary tools required for repair deemed to be included in the quoted rate. (iii) Cost of short pieces of copper conductor for internal wiring in between holders, ballast, ignitors and other accessories housed in the same light fitting deemed to be included in the quoted rate]

All as per item ser No 6 above but for post top lanterns, outdoor bracket lights and flood lights

Supply only driver for LED luminaires upto 24 watt of (Make:Philips, driver type BRP320 POT Spare LED Driver or equivalent in make Bajaj/ Crompton Greaves/ Havells).

Supply only driver for LED luminaires upto 36 watt of (Make: Philips, driver type: BRP409 Spare LED Driver or equivalent in make Bajaj/ Crompton Greaves/ Havells).

Supply only driver for LED luminaires upto 75 watt of (Make: Philips, driver type: XITANIUM 75W 0.70A 1-10V INT-Y SXT or equivalent in make Bajaj/ Crompton Greaves/ Havells).

Supply only driver for LED luminaires upto 150 watt of (Make: Philips, driver type: SPARE DRIVER XTE 150W 700 mA NTC or equivalent in make Bajaj/ Crompton Greaves/ Havells.)

Material and labour LED Post Top Lantern 40 watt for 360O indirect lighting with glare free milky white side covers and IP65 grade protection including taking out of old light fitting all as specified and as directed ( Make:Cat No: LPTO-40-CDL/M Crompton Greaves or equivalent in makePhilips/ Bajaj/ Havells )

Material and labour for cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges

Material and labour for Galvnized steel tubluler light gead 40 mm pipe not less then 1.5 mtr suitable for street light bracket with all fixing arrangment complete all as specified and as directed.

Supply & fixing BAMBOO LED BOLLARD,Aluminium landscape IP 65 luminaire for diffuseed lighting with high power LED as light source. complete with all accessories, prewired and flexible wire twin core from terminal block and mounted on cement concreet foundation not less the 1 feet hight. complete all as specified and directed.. (Make-HAVELLS Cat No- BAMBOOBL8WLED830SSYMTOPCM or equivalent in make phillpes or Magik).

Cleaning roof top of MES Installations with wire brush including removing of vegetations

Material and labour for bush cutting and cleaning of area in and around of E/M installations in patches:

Sub station No 2

Sub station No 3

Sub station No 4

Sub station No 5

Sub station No 7

Sub station No 8

Sub station No 9

Sub station No 10

Servicing of air circuit breaker AC three phase 415 volt, 50 Hz, 800 Amp to 1600 Amp including taking shut down and racking out the complete assembly, cleaning of all the parts by air blower, applying suitable chemical (CRC), greasing of all moving parts, checking resistance of all the contact points and refixing the same in original position all as specified and as directed.

Taking out of old PCC / steel tubular pole of 9 mtr height and installing the pole in other location all as specified and as directed [Note: Earth work and PCC will be measured and paid under separet item of this schedule]

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in any type of soil

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil

Material and Labour for dry river Sand filling in trenches including punning down consolidation in soft/ loose soil

Material and Labour for tubes, 'light grade', galvanised, with all fitting; laid in trenches for cable/ earth lead protection of the following sizes: -

80 mm dia nominal bore

50 mm dia nominal bore

40 mm dia nominal bore

Material and labour for brick protection of cables in trenches with old size sub-class 'B' bricks

Relaying of old useful bricks as retrieved during taking out of old LT UG cable all as specified and as directed.

Material and labour for cutting of existing bituminous metal road for laying of cables including demolition of road surface, excavation from bottom level of road upto a depth of 0.55 m from road surface and returning filling of excavated earth and making good the road surface with PCC type C2 (1:3:6) with 40 mm graded aggregate upto a depth of 10 cm from road surface and removing of excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and as directed. [Note: Laying of cable/ protection pipe will be measured and paid under separate item of this schedule]

Taking out of old LT UG cable 1100 volts grade all as specified and as directed for the following size of cables

400 sqmm 3.5 core and above

240 sqmm 3.5 core

185 sqmm 3.5 core

95 to 120 sqmm 3.5 core

50 sqmm 3.5 core

25 to 35 sqmm 3.5 core

10 to 16 sqmm 2/4 core

Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade all as specified and as directed for the following size of cables: -

400 sqmm 3.5 core

240 sqmm 3.5 core

185 sqmm 3.5 core

120 sqmm 3.5 core

95 sqmm 3.5 core

50 sqmm 3.5 core

35 sqmm 3.5 core

25 sqmm 3.5 core

16 sqmm 4 core

10 sqmm 2 core

Material and labour for MCCB 4 pole, 415 V, 100 Amp, 36 kA including taking out of old one all as specified and as directed.(Make:Cat No: CM 9791900K20G L&T or equivalent make as specified by GE ).

Material and labour for MCCB 4 pole, 415 V, 125 Amp, 36 Ka including taking out of old one all as specified and as directed.(Make: Cat No: CM 9068100L00G of L&T or equivalent as specified by GE)

Material and labour for MCCB 4 pole, 415 V, 160 Amp, 25 Ka including taking out of old one all as specified and as directed.(Make: Cat No: CM9063800NO including Spreader terminals Cat No: CM92007OOOO of L&T or equivalent in make of Legrand/ Schneider/ ABB)

Material and labour for MCCB 4 pole, 415 V, 250 Amp, 36kA including taking out of old one all as specified and as directed.(Make:Cat No: CM92151OOOOX1 of L&T or equivalent as approved by GE).

Material and labour for MCCB 4 pole, 415 V, 400 Amp, 36kA including taking out of old one all as specified and as directed.(Make: Cat No: CM93003OOOOX1 of L&T or equivalent as approved by GE).

Material and labour for MCCB 4 pole, 415 V, 63 Amp, 25 kA including taking out of old one all as specified and as directed.(Make:Cat No: Cat No:CM91712OOHOOG of make: L&T or equivalent in make of Legrand/ Schnieder/ ABB )

Material and labour for MCCB Spreader Terminals 2 Pole including taking out of old one all as specified and as directed.(Make:Cat No:CM9909640000 of L&T or equivalent in Legrand/ Schnieder/ ABB).

Material and labour for MCCB Spreader Terminals 3 Pole including taking out of old one all as specified and as directed.(Make:Cat No :CM9909640000 of L&T or equivalent in Legrand/ Schnieder/ ABB).

Material and labour for MCCB Spreader Terminals 4 Pole including taking out of old one all as specified and as directed.(Make:Cat No:CM9909640000 of L&T or equivalent in Legrand/ Schnieder/ ABB).

M & L for Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes for use as duct covers as per existing size including taking out of old one all as specified and as directed.

Maintenance of LT distribution panel after taking proper shutdown including cleaning of enclosure with dry cloth and cleaning of contact points with suitable electrical contact cleaning agent and clean dry cloth, checking of tightness of all the contact points, replacement of defective/ burnt out lugs and bolts & nuts and reporting of major defects if any found during maintenence all as specified and as directed for the following: -

LT panel with Incoming ACB upto 1600 Amp 1 No and outgoing MCCBs upto 630 Amp 4 pole upto 8 Nos and Changeover if any

LT panel with Incoming MCCB upto 800 Amp 1 No and outgoing MCCBs upto 400 Amp 4 pole upto 8 Nos, all MCBs, Changeover if any

LT feeder pillar box with Incoming MCCB upto 400 Amp 1 No and outgoing MCCBs upto 250 Amp 4 pole upto 8 Nos and all MCBs

Material and Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32x6mm galvanised iron strip including taking out of old strip all as specified and as directed.

Material and Labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw including taking out of old one all as specified and as directed.

Material and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

All as per item No 43 here in before but with GI wire of 4mm dia as earthing lead

Cable Iugs,aluminum tubular as per following :

Taking out interlocking paver blocks of any description and staking it properly at site for carring out cable trenches and connected E/M works and refixing of old stacked interlocking paver blocks after at same site after completion of E/M works and including all extra handling and removal and disposing off rubbish out of MoD land complete all as specified and directed.

Surfaces dressing n.exc 15cm deep and getting out in loose/soft soil complete all as specified and directed.

Removing excavated material outside MoD land n. exc. 1.50km and depositing where directed complete all as specified and directed.

M & L for 25mm sand cushion under paver block or interlocking tiles floor including watering and consolidation complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for 60mm thick coloured machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 M -40 Grade with grey cement and no pigment complete all as specified and directed.

M. M. C. AND CO

RADHA ENTERPRISE

Shanti Construction Company

CHATTERJEE CONSTRUCTION

MASTER BUILDERS

TOTCO

NUPUR CONSTRUCTION

PUTUL CONSTRUCTION CO.