Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹16.1 LAccepted-AOC | 1st | Accepted-AOC The lowest bidder M/s Agrawal Builders has been accepted pl. | |
| 2 | 2nd₹18.5 L+₹1.6 L (9.60%)Rejected-Finance | 2nd | Rejected-Finance L2 | |
| 3 | 3rd₹18.7 L+₹1.8 L (10.7%)Rejected-Finance | 3rd | Rejected-Finance L3 | |
| 4 | 4th₹27.0 L+₹10.1 L (60.0%)Rejected-Finance | 4th | Rejected-Finance L4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
30 Aug 2021, 6:00 pmClosed
GE AWC MHOW
GE AWC MHOW
REPAIR / MAINT OF SOLAR LIGHT FITTINGS, BATTERY AND CONNECTED ACCESSORIES AT AWC UNDER GE (AWC) MHOW.
2021_MES_464585_1
8503 GE(AWC) /MHOW / OF 2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AWC MHOW
All as per Tender Documents and NIT.
7 documents required · 7 mandatory
₹500
Yes
GE AWC MHOW
₹40,000
Yes
16 Sept 2021
2 Aug 2021
31 Aug 2021
3 Aug 2021
30 Aug 2021
17 Aug 2021
Amount
Supply and fixing in replacement of Solar Battery 12V 165 AH type for suitable solar light fitting type including nut bolts and washer complete all as specified and directed. Make:- Exide/ Livguard Solar/ Luminous as approved by GE.
M&L for painting to battery stand fixed on steel tublar solar poles including clamp bracket with two coats of aluminium paint after preparation of old painted surface and providing 03 No alternate strip of 30 cm wide with black and white super quality enamel paint above embeded level and writing pole No with 2 inch wide letter complete all as specified and directed by Engr-in-Charge. Make of Paint:- Asian / Nerolac / Berger as approved by GE.
Trimming/ lopping branches of tree branches touching to solar panel not exceeding 30 cm girth , shrub, vegetation, bushwwod and saplings at least upto 2 M from outer edge of solar panel including removing of braches of trees etc. to a distance exceeding 100 m and not exceeding 150 M complete all as specified and directed. Note :- (i) Linear length centre to centre of the poles shall only be measured ) (ii) Shutdown wherever required shall be taken in writtig from Engr-in-Charge.
S & F cross arms of mild steel channel or angle sections of required size and shape including clamps, D clamps, eye hooks, back plate with bolts, nuts and washers, welding, bending cold or hot drilling holes for bolts, insulator in any shape or size as indicated or directed and inclusive of one priming coat and two coats of aluminum paint including preparation of surfaces complete. Make:- SAIL / TISCO / RINL as approved by GE.
M & L for taking down & cleaning of solar street light panel including cheacking of connnection and replaced losses wire and petroleum jelly on battery terminal including topup distil water and Hydro sulfurice acid testing of gravity of battery by hydro meter and charging as requried level and including solar panel positions acording the sun fixing the same complete all as specified and directed.
Supply and fixing in replacement of solar light fitting type BRP402 1x16 LER - HP/CW 28 w DIM 12 Vv3 system flux 2300K lumen 12v DC supply CCT 5700K complete all all as specified and directed. Make:- Bajaj / Wippro / Havells as approved by GE.
Supply and fixing solar light fitting ALL-in-ONE street light 18 W with built in mono crystalline panel, lithium ferro phospate (life P04) Battery, MPPT charge Controller and PIR sensor with colour temperature 6000-6500K including 80mm bore GI medium grade pipe fixed vertically in sub stn and solar light fixed on top direction directed by Engr-in-Charge complete all all as specified and directed. Make:- Bajaj / Wippro / Havells as approved by GE.
Supply, fixing, testing and commissioning energy saving long life LED Street light fitting limanaries 60 watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% and minimum system efficacy of 110 Im/W complete all as specified and directed by Engr-in-Charge. Make:- Wippro / Havells / Philips as approved by GE.
MODI CORPORATION
Mighty Steel Sales Crop
Garg Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .