Providing of Fancy Street Light Pole and LED Fixture at Road No. 320 Haiderpur, Shalimar Bagh Assembly Constituency

Dismantling of old existing pole upto 10/12 mtr height alongwith brackets and fittings for new installed GI octagonal pole with using proper engineering & safety tools, gas cutter, Crane/ tower wagon etc. as required at site as decided by Engineer in Charge i/c removing of pole foundation and making the site finished, neat and clean surface / road & make good etc as required completed at site

Dismantling of existing street light foundation of with the help of suitable equipments and as decided by Engineer in Charge etc as reqd complete at site.

Supplying, installation, testing and commissioning of 12.5 Meter height High Mast with nominal size base dia 360mm and top 150mm in polygonal structure, with comprising of winch for raising /lowering, motor push button, aluminum pulleys, head frame with latching system to enhance the safety, lightning protection finial & buffers, resting on the foundation bolts duly provided with stiffeners, double locking arrangement for the door and pole installed on the existing foundation complete as per specifications attached i/c supply and fixing the following accessories. a) Hot dipped galvanized internally & externally, suitable for wind velocity as per IS 875 part. sheet thickness 3 mm, high mast having octagonal structures in two sections with flanges provided with strengthening gussets between bolt holes for stiffening complete with raising/lowering mechanism, double drum winch, motor push button station, pulleys, head frame, lightening protection finial and buffers, The sections shall be stress/slip fitted without any circumferential weld in between. - 1 No. b) Galvanized Lantern carriage with 6 nos. arms secured tightly with suitable arrangement for fixing of upto 6 Nos. luminaires & other accessories complete etc. as required - 1 No. c) Set of stainless steel hoisting ropes of 6 mm dia. - 1 Set d) 0.5 HP Motor suitable to operate on 230V/415V, 50Hz, 960 RPM detachable type for lowering and lifting mechanism - 1 No. e) Supplying and drawing multicore, copper conductor flexible power trailing cables of appropriate rating for energizing the luminaries complete as per specifications. f) Supply & Fixing of LED aviation light - 1 No. g) Supplying & fixing of foundation bolts manufacturere from special steel along with nuts, washer, anchor plate & tamplates etc. nut shall be welded to the bolt.

Providing and laying in position M-25 (1:1:2) reinforced cement concrete foundation of size 900 mm (L) x 900 mm (W) and 2000 mm (D) at Top & at Bottom thickness mat with reinforce and iron bars below 1200 mm (L) x 1200 mm (W) and 200 mm (D) i/c excavation of earth, providing cutting, bending and placing in position, reinforcement TMT bars of 12 mm dia - 2500 mm long (approx) - 20 Nos. and reinforcement ring of cold twisted bar of 8 mm dia - 3300 mm (approx) - 9 Nos., (with 150 mm spacing), for top and 10 mm dia - 2500 mm long (approx) - 32 Nos. for bottom as required with positioning of foundation bolts and providing 90 mm (O.D.) DWC, HDPE pipe for cable entry and exit as reqd. at the bottom most part of foundation, 1500 x 1500 x 200 mm PCC (1:4:8) has to be made apart from above RCC, i/c removing of Malba, Debri etc from site and site will be neat and clean after complete.

Supplying, Installation, testing and commissioning of 12 m height Fancy street light pole double arm bracket made of fully GI sheet 6 mm thickness steel sheet, IP-65 Fully weather proof, finish with antique colour pole paint two and more coat i.c 1500/1800 mm long fancy double arm bracket, window height 1.5 m and pole having base plate size 300 x 300 x 20 mm thick. Including connection of 3 x 4 Sq.mm Aluminium wire for supply of fitting, duly wired up to connector complete etc as reqd. The bottom column should have an integral inbuilt looping box with cover of the same. The pole shall be installed on foundation including supply and fixing of anchor plate, foundation bolts, making foundation, excavation of earth, cutting, bending, placing DWC Pipe and refilling & removing of waste malba debris from site and transport to MCD dumping yard etc as required.

Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 750 mm.(L) X 750 mm. wide and 1800 mm. deep i/c excavation of earth, providing hard cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm. dia- 1960mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 2800mm (approx) - 10nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) and providing 90 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required. (for 12 m pole)

Supply and drawing following sizes of PVC insulated Aluminum conductor unarmoured multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd. a) 3 core 4 sq.mm

Supplying and Laying of XLPE, Aluminum armored conductor cable in the existing pipe as reqd i/c termination of cable with suitable size thimble at both end etc as required complete at site. a) 4 X 25 sq.mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. a) 63 mm dia (OD-63 mm & ID-51 mm nominal)