N.I.T. No. 150/G/E-Tendering/2026-27/Bilaspur, Dated: 28/10/2026

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

NIT SCHEDULE fo Providing Electrification Renovation work of 100beded girls hostel at Kirodimal Govt degree college Raigarh,Distt-Raigarh (C.G.)

The rates taken in the estimate are as per CGPWD,(E&M) SOR in-forced from 01-06-2020. PAC Amount 16.22 Lacs

Sr. No. Department SOR Year S.O.R. Particulars Of Item Qty. Rate Unit Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N)

1 PWD ELECT 2020 23.3.5 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 5.0 HP, three phase 2 26072.00 Each 52144.00 0 0 N N

2 PWD ELECT 2020 23.6.2 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. 50 mm outer dia 320 118.00 Metre 37760.00 0 0 N

3 PWD ELECT 2020 23.7.4 Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as per specification. 50 mm dia. 2 1058.00 Each 2116.00 0 0 N

4 PWD ELECT 2020 23.8.4 Supplying and fixing of following sizes GM non return valve ISI mark in the suction/ delivery line etc. as per specification. 50 mm dia. 2 1246.00 Each 2492.00 0 0 N

5 PWD ELECT 2020 23.10 Supply, installation, testing and commissioning of 5-7.5 HP 3 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 5/7.5 HP 3 phase DOL starter with over load and no volt relay 1 No c) 32 A C curve TPMCB 1 No" 2 4152.00 Each 8304.00 0 0 N

6 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. 6 291.00 Metre 1746.00 0 0 N

7 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification 3 388.00 Each 1164.00 0 0 N

8 PWD ELECT 2020 23.14.3 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 3x4.0 sqmm 400 90.00 Metre 36000.00 0 0 N

9 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. 340 16.00 Metre 5440.00 0 0 N

10 PWD ELECT 2020 2.15.2 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in surface complete as per specification and IS: 9537 (2000 Part 5) 25 mm 2000 39.00 Metre 78000.00 0 0 N

11 PWD ELECT 2020 3.11.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010) 2 x 1.5 sq. mm 800 26.00 Metre 20800.00 0 0 N

12 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification 5000 19.00 metre 95000.00 0 0 N

13 PWD ELECT 2020 4.3.2 Supplying and fixing of following sizes PVC switch box suitable for modular switches with modular base and cover plates on surface complete as per specification 118mmX94mm (3 Module) 4 133.00 Each 532.00 0 0 N

14 PWD ELECT 2020 5.4.1 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5/6 amps one way switch 4 69.00 Each 276.00 0 0 N

15 PWD ELECT 2020 5.4.5 3 pin 5/6 amp socket outlet 4 96.00 Each 384.00 0 0 N

16 PWD ELECT 2020 11.1.3 Supplying, installation, testing and commissioning following rating single phase, 230 volts OFF-LINE UPS (sine wave) with built-in battery including connection as per specification. 1.50 KVA 1 8379.00 Each 8379.00 0 0 N

17 PWD ELECT 2020 11.5.4 Supplying, installation, testing and commissioning following rating lead acid battery (Maintenance Type) including connection as per specification. 200 AH 2 16851.00 Each 33702.00 0 0 N

18 PWD ELECT 2020 27.11 Supplying , installation , testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67 , IK 10) , 1/3” 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night Support, UL ,CE FCC Certified as per the specifications. 10 6353.00 Each 63530.00 0 0 N

19 PWD ELECT 2020 27.12 Supplying , installation , testing and commissioning of 2 MP DOME Camera weather & dust proof IP based Fixed Lens day/night Camera (IP66) 2Megapixel CMOS Image Sensor,H.265 / H.264 triple-stream encoding , WDR(120dB), Day/Night UL, CE, FCC Certified as per the specifications. 10 5094.00 Each 50940.00 0 0 N

20 PWD ELECT 2020 27.20 Supplying , installation , testing and commissioning of 32 Channel NVR 2 Sata port Up to 32 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output ,ONVIF Version 2.4 conformance , Alarm In / out 4/2 , Two way talk 1 Channel Input, 1 Channel Output RCA , 1 RJ-45 port (10/100/1000Mbps) as per the specifications. 1 16323.00 Each 16323.00 0 0 N

21 PWD ELECT 2020 27.25 Supplying , installation , testing and commissioning of 4 Port POE Switch 10/100 4 Port PoE with 2 10/100 Mbps Uplink ,Power Budget 60 Watt , Max 30 watt per port as per the specifications. 1 2773.00 Each 2773.00 0 0 N

22 PWD ELECT 2020 27.30 Supplying , installation , testing and commissioning of 16 Port PoE Switch 10/100 16 Port with 2Giga & 2 SFP Combo Uplink Ports, PoE switch 150W ,Single Port Max 30W as per the specifications. 2 14771.00 Each 29542.00 0 0 N

23 PWD ELECT 2020 27.38 Supplying , installation , testing and commissioning of 6 TB Surveillance Hard disk drive Complete as required 2 14590.00 Each 29180.00 0 0 N

24 PWD ELECT 2020 27.44 Supplying , installation , testing and commissioning of 4U Indoor Rack Wallmount 4U 400D With Front Glass Door Lock & Key 550 4U - (fan; cable manager; PDU) complete as required. 3 3132.00 Each 9396.00 0 0 N

25 PWD ELECT 2020 27.45 Supplying , installation , testing and commissioning of 6U Indoor Rack Wallmount 6U 450D With Front Glass Door Lock & Key 550 6U - loaded with cable manager + PDU + Fan complete as required. 1 3507.00 Each 3507.00 0 0 N

26 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. 60 462.00 Metre 27720.00 0 0 N

27 PWD ELECT 2020 27.49.4 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. 55 inch 1 63719.00 Each 63719.00 0 0 N

28 PWD ELECT 2020 6.28.11 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 150 watt 10 9347.00 Each 93470.00 0 0 N

29 PWD ELECT 2020 6.59 Supply and installation of timer including relay and contactor set complete as required. 1 3929.00 Each 3929.00 0 0 N

30 PWD ELECT 2020 6.103 Supplying, installation, testing and commissioning of Day/Night sensor 220 - 240 volt AC for lighting purpose of IP 65 wattage rating upto 100 Watts as per the specification 1 558.00 Each 558.00 0 0 N

31 PWD ELECT 2020 7.17.2 Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral). 16 sqmm (63 amp) 36 104.00 Each 3744.00 0 0 N

32 PWD ELECT 2020 7.19.1 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. Upto 300 mm deep 1 6818.00 sqm 6818.00 0 0 N

33 PWD ELECT 2020 7.21.1 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 100 amp (20x3mm) 1 1319.00 Metre 1319.00 0 0 N

34 PWD ELECT 2020 9.11.2 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 6 amps to 32 amps 8 148.00 Each 1184.00 0 0 N

35 PWD ELECT 2020 9.16.5 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.63 amps 1 1316.00 Each 1316.00 0 0 N

36 PWD ELECT 2020 9.27 Supplying and fixing Low voltage (class -II) surge protection device (SPD) TP&N 440 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 1 8251.00 Each 8251.00 0 0 N

37 PWD ELECT 2020 10.14.4 Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 100 amps 1 7337.00 Each 7337.00 0 0 N

38 PWD ELECT 2020 10.15.2 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 100/5 amps 3 349.00 Each 1047.00 0 0 N

39 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. 6 94.00 Each 564.00 0 0 N

40 PWD ELECT 2020 10.23 Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification. 1 1201.00 Each 1201.00 0 0 N

41 PWD ELECT 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) 8 3243.00 Set 25944.00 0 0 N

42 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) 16 6209.00 Set 99344.00 0 0 N

43 PWD ELECT 2020 12.19.1 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: With 3 metre long GI Pipes and 50 kg back filling compound. 1 10955.00 Each 10955.00 0 0 N

44 PWD ELECT 2020 12.16 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as per specification. 20 115.00 Metre 2300.00 0 0 N

45 PWD ELECT 2020 14.2.4 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 110 mm outer dia 190 355.00 Metre 67450.00 0 0 N

46 PWD ELECT 2020 14.3.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 100 mm internal dia 25 879.00 Metre 21975.00 0 0 N

47 PWD ELECT 2020 15.1.23 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 4 x 16 sq. mm. 200 300.00 Metre 60000.00 0 0 N

48 PWD ELECT 2020 15.15.1 Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, unarmoured, copper conductor control /power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification and IS: 694 (2010). 2 x 1.5 sq. mm 100 106.00 Metre 10600.00 0 0 N

49 PWD ELECT 2020 15.28.3 Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. . 16 sq. mm 72 19.00 Each 1368.00 0 0 N

50 PWD ELECT 2020 19.8.1 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 4mm thick anchor plate, 4 nos 24mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 9 metre high, dia 155mm at bottom and 90mm at top, base plate size 260x260x16mm, foundation bolts 750mm long 8 13974.00 Each 111792.00 0 0 N

51 PWD ELECT 2020 19.11.7 Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 9 metre high 8 985.00 Each 7880.00 0 0 N

52 PWD ELECT 2020 19.12 Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification. 4.5 5219.00 cum 23485.50 0 0 N

53 PWD ELECT 2020 19.27 Supplying and fixing of single over hang (Arm) 1500 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI "A" Class pipe welded to 300 MM Long GI Pole canopy of suitable dia at angle of 102.50 Degree including having GI triangular stiffner and making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy including FRP Dome on existing pole etc. as per enclosed drawing and as per direction of engineer-in-charge. 6 2050.00 Each 12300.00 0 0 N

54 PWD ELECT 2020 19.28 Supplying and fixing of double over hang (Arm) 1500 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI "A" Class pipe welded to 300 MM Long GI Pole canopy of suitable dia at angle of 102.50 Degree including having GI triangular stiffner and making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy including FRP Dome on existing pole etc. as per enclosed drawing and as per direction of engineer-in-charge. 2 2853.00 Each 5706.00 0 0 N

55 PWD ELECT 2020 30.2 Earth work in soft rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling with excavated soil in trench / pit to ground level complete as per specification 6.2 210.00 cum 1302.00 0 0 N

56 PWD ELECT 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. 5 767.00 Each 3835.00 0 0 N

57 PWD ELECT 2020 13.2 Making jointing of copper tape (with another copper tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. 20 51.00 Each 1020.00 0 0 N

58 PWD ELECT 2020 13.3 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) 150 217.00 Metre 32550.00 0 0 N

59 PWD ELECT 2020 13.4 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) 750 219.00 Metre 164250.00 0 0 N

60 PWD ELECT 2020 13.5 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as per specification. 20 93.00 Each 1860.00 0 0 N

61 PWD ELECT 2020 13.6 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as per specification. 100 654.00 Metre 65400.00 0 0 N

62 PWD ELECT 2020 13.7 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate having 4 nos holes for fixing etc. complete as per specification. 10 319.00 Each 3190.00 0 0 N

63 PWD ELECT 2020 13.8 Making jointing of G.I. tape (with another G I tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. 20 42.00 Each 840.00 0 0 N

64 PWD ELECT 2020 13.9 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) 150 48.00 Metre 7200.00 0 0 N

65 PWD ELECT 2020 13.10 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) 400 80.00 Metre 32000.00 0 0 N

66 PWD ELECT 2020 13.11 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as per specification. 20 54.00 Each 1080.00 0 0 N

67 PWD ELECT 2020 13.12 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as per specification. 100 128.00 Metre 12800.00 0 0 N

68 PWD ELECT 2020 13.13 Fixing of lightning conductor finial, made of 25 mm dia 300mm long, copper tube/ G.I. tube, having single prong at top, with 85 mm dia 3mm thick copper base plate including holes etc. complete as per specification. 20 93.00 Each 1860.00 0 0 N

69 PWD ELECT 2020 13.14 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) 150 20.00 Metre 3000.00 0 0 N

70 PWD ELECT 2020 13.15 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) 400 42.00 Metre 16800.00 0 0 N

71 PWD ELECT 2020 13.16 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as per specification. 30 26.00 Metre 780.00 0 0 N

TOTAL AMOUNT 1622473.50

SAY IN LACS 16.22