Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹15.8 L+₹99,001.50 (6.67%)Rejected-Finance VIJAY NAGAR KUMHARTOLI HANSARI INFRONT OF JIGYASA INTER COLLEGE JHANSI | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-Finance Not become lowest bidder | |
| 3 | L3₹16.0 L+₹1.2 L (7.76%)Rejected-Finance | L3 | Rejected-Finance Not become lowest bidder | |
| 4 | L4₹17.7 L+₹2.9 L (19.2%)Rejected-Finance WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-Finance Not become lowest bidder | |
| 5 | L5₹18.3 L+₹3.5 L (23.3%)Rejected-Finance | L5 | Rejected-Finance Not become lowest bidder |
Tender Value
₹16.4 L
EMD Value
₹32,900
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jhansi
Garrison Engineer Jhansi, Sadar Bazar, Jhansi 248001
CERTAIN REPAIR / MAINT OF B/R AND E/M NATURE WORKS TO MD AND OTM ACCN SEWAGE LINES AND E/M INSTALLATION AT MIL STN NOWGONG UNDER AGE B/R I AT GE JHANSI
2022_MES_572453_1
GE/JHA/TOK/71 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
Jhansi
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE Jhansi
₹32,900
Yes
9 Feb 2023
31 Dec 2022
23 Jan 2023
31 Dec 2022
21 Jan 2023
14 Jan 2023
31 Dec 2022 - 9 Jan 2023
Amount
Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.
M&L for Non skid ceramic colour tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M&L for joint free, ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4, complete all as directed.
M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed.
M&L 20mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.
M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.
Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.
S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.
Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.
Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.
M&L for preparation of new plastered surface and applying three coats of white wash on new plastered wall surface, complete all as specified and as directed.
M&L for complete removal of existing treatment from old treated surfaces of wall and applying two coat of weather proof exterior grade emulsion paint over and incl one coat of primer and one layer of Birla/JK White wall care putty to get level and smooth surface, complete all as directed and specified.
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.
M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil bound white or any tinted complete all as specified and directed.
M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.
M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of white wash (lime) on ceiling surface, complete all as specified and directed.
M&L for writing or repainting letters or figures (Block, Roman, Italic, Indian) exc 15.0 cm but not exc 30 cm in height and line of letters or figures not exc 2.0 cm wide for Bldg No / Name and similar works etc with two coat of synthetic enamel paint, complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.
All as per item here-in-above but not exc 1.5 sqm each
Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.
Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. Make : Rajshree / Sintex
S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.
S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.
S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed.
S&F of 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed.
S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed.
S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.
S&F of 200mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.
S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed.
S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. (Make : Ashish, Classic)
S&F of 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.
S&F of 150mm aluminum handle cast type anodized complete all specified and directed.
S&F of 100mm aluminum handle cast type anodized complete all specified and directed.
S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed
S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.
M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.
M&L for stainless steel rod 15mm dia steel pipe cutting into length as required at site with and incl SS end brackets, fixed in cupboard and similar works, complete all as specified and directed.
S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed.
S&F in repairs Block boards 18/19mm thick, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete as per the specifications and as directed by the Engineer - in -charge.
S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed
M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.
M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.
S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.
M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.
M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed.
M&L for 30mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(b) and conforming to IS-1003 Part-I & II, complete all as specified.
M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and directed.
M&L for mild steel angles, bars, flats etc, as in hold fasts, pipe clamps, plain angle cleats for securing purlins, supports for stiffening of fencing, wall ties and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for mild steel section as in door/windows chowkhats frame of steel gate of confirming to Fe-290 Gde E-165 including all necessary machine wks i.e. cutting, welding, grinding etc, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.
S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.
S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.
S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal.
S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.
Taking down steel tubing with and incl connections, of 15 mm dia bore, complete all specified and directed.
Taking down steel tubing with and incl connections, of 20 mm dia bore, complete all specified and directed.
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata
M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, complete all as specified and directed.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.
S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed.
S&F in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 550 mm x 450 mm with approx bowl size of 500 mm x 375 mm x 200 mm etc, complete all as directed.
S&F in replacement of stainless steel kitchen plate rack made out of 1 mm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed.
S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed.
S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed.
S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.
S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed.
S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed.
S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.
S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as directed.
S&F in replacement of bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.
S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed.
S&F in replacement of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as directed.
S&F in replacement of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed.
S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed.
S&F in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed.
S&F in replacement of waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as directed.
S&F in replacement of waste coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.
S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed.
S&F in replacement of plastic sheet with covers for water closet, of existing colour, closed pattern with flat bottom with chromium plated hinging device, complete all as directed.
S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed.
S&F in replacement of 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as directed. Make : Hindware (Cat No - 60002) / Cera (Cat No - 5001)/Parryware (Cat No - C0575).
S&F in replacement of 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.
S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.
S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed. Make : Hindware / Cera / Jaquar / Parryware.
M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed
M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described exc 10 cm width or girth and applying two coat of synthetic enamel paint over and including a coat of primer and layer of putty/filling material to get smooth & level finish, complete all as specified and directed.
Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.
Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.
S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest
S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest
M&L for 6mm thick non asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.
M&L for 6mm thick non asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.
M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
S&F powder coated aluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified.
S&F powder coated aluminium ventilator Luver type with frame , aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, etc completed all as specified and directed.
M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed.
M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.
S&F of glass, tinted type, 5.0 mm thick, each panes exc 0.5 sqm, suitable for aluminium / window/ Ventilators / door opening and similar work, complete all as specified.
M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, weight of aluminium setion not less than 0.55kg/mtr, complete all as specified and as directed.
M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed..
S&F mortice lock of size 100mm, 4 lever type, duly fixed in aluminium door, complete all as directed.
M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.
M&L 40 mm thick plain cement concrete type B1 1:2:4 (using 20 mm graded stone agg) as in floor, finished even and smooth (without using extra cement), laid in panels using 4.0mm thick & 38mm wide glass strip, panels will be not more than 1.2 x 1.2 mtr in size, laid to slope 1:30, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of 4mm thick & 38mm wide glass strip.
S&F 15 mm bore Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. (Make: Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality) ).
S&F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. (Make: Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality) ).
S&F 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. (Make: Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality) ).
M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), incl necessary form work complete all as specified and directed .
M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement with pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note :- The cost of sand cushion is included in quoted rate.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil.
Excavation over area not exceeding 1.5 M in depth and getting out in any type of soil.
Excavation over area exc. 1.5m but not exceeding 3.0 M in depth and getting out in any type of soil.
Excavation over area exc. 3.0 m but not exceeding 4.5 M in depth and getting out in any type of soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including concrete bed of following internal dia of pipe :
100 mm dia
150 mm dia
200 mm dia
Supplying laying and testing of SGSW (Salt glazed stoneware) drain pipe grade ‘A’ (ISI Marked)laid in trenches to level /gradient, jointed in CM 1:1 complete all as specified for the following internal dia of pipes :-
100 mm dia
150 mm dia
200 mm dia
M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for for the following internal dia of pipes :-
100 mm dia
150 mm dia
200 mm dia
Cutting into existing manholes, bricks wall for connecting new drain pipe/bend/Tee of following sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (1/2 round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required for following internal dia of pipe complete all as directed by Engineer-in-Charge.
100 mm dia
150 mm dia
200 mm dia
Attending day to day complaint of different type sewage work such as blockage of WHB, WC,urinals, Sink, Bottle trap, Floor trap, Nahani trap, 'P' or 'S' traps of WCs, gully trap, vertical pipes of any type and any dia including juction holes of any description of various units area, Single living Accn, JCOs ORs Md Accn, Offrs Md Accn and any other Accn of AGE B/R-I area, repairing of CI pipes joints (lead,cement joints) cleaning of sewage line, manholes of anynsize and depth and making it fully functional and removal of sludge / mud out side of Cantt area, excluding sunday and holiday by employing following manpower, to entire satisfaction of Engr-in-charge for making payment with following requirement / condition, complete all as directed.
NOTE FOR ITEM NO. 156
(a) The contractor will have to employ minimum 02 nos labour / mazdoor every day excluding Sunday and holiday to attend day to day sewer complaints.
(b) The cost of items like nails screws,hexa blades, washers, plugs, cement, gasket, lead, jute, packing material, bamboo sticks, etc shall be deemed to be inclusive in the quoted rates only.
(c) All the complaint(s) will be addressed and rectified within 04 hrs from the time of receipt of complaint.If,contractor or his tradesman fails to attend and rectify the complained within 04 hrs from the time of receipt of complaint,the compensation/penalty of Rs 50.00 ( Rupees fifty only) per complaint per hr for 04 hrs and after that Rs 100.00 ( Rupees one hundred only) per complaint per hr shall be recovered from the contractor's.
(d) The cost of transportation ( to and from) and other necessary T & P,flexible rods,wires,bamboo sticks and other necessary equipment and safety gear shall be arranged/brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.
(e) Any labourers/workmen, at any point of the time during the course of execution of work, at any cost, will not be allowed to manual handling of sewage containing human excreta (i.e. night soil and sludge/sewage containing night soil). All the sludge/mud,containing human night soil, from manholes,gutters shall be removed by mechanical means by deploying required machinery as and when required.The cost in this effect shall be deemed to be inclusive in the quoted rates only.
(f) The labourer(s) should not leave the complaint cell till the next reliever(s) does not report to complaint cell.
(g) The labourer(s) should be free from the habits of any addiction such as liquor,smoking or other drugs.
(h) In case, aditional manpower other than mentioned here-in-above, will be required for to attend day to day sewer complaint and smooth functioning of sewage system, the contractor shall be solely responsible for providing the same without any extra cost and no extra payment will be made in this affect at any stage by department.
(j) It is an explicit condition of the contract that payment of wages to tradesmen/workers employed on the work shall be made through bank account of individuals only. The wage paid to the tradesmen/workers shall not be less than minium wages/fair wages as notified time to time by State/ Central Government (which ever is more).
(k) The provision of statutory laws relating to Minimum Wages, EPF and ESIC payments shall be strictly adhered to by the Contractor and quoted rate shall deemed to include these factors.
M&L for cleaning manhole (s)/sewage sump using mechanical means i.e mechanical sweeper to remove mud/sludge /muck/human excreta etc and disposing of the same outside Cantt Area using mechanical sewage tanker (s) etc to the entire satisfaction of Engineer-in-Charge, compelete all as directed.
25 Users
50 Users
100 Users
150 Users
200 Users
250 Users
300 Users
S&F 100mm bore cast iron (sand cast) soil waste and vent pipe (ISI Marked)in any length with or without ears with cement joint laid in trenches including taking out of existing pipes all as specified and directed.
S&F 100 mm bore CI bends (any radius) diminishing pieces or tapers (large bore measured) fixed in cement joints complete all as specified and directed including taking out existing AC/cast iron bends.
All as per item herein before but 75mm bore .
S&F 100mm dia cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with cement joint in 1:1 complete all as specified and directed.
All as per item herein before but 75mm bore
M&L for jointing only 100mm dia cast iron pipes and fitting or AC pipes and fittings with cement joints in repair
M&L for jointing only 75mm dia cast iron pipes and fitting or AC pipes and fittings with cement joints in repair
S&F in replacement PVC (SWR) multi floor trap 100mm dia of outlet with grating including jointing to waste pipe with solvent cement complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as directed
M&L for brick work with sub class 'B' bricks in one bricks thick honey comb built in cement mortar 1:4.
M& L for precast cement concrete, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces
Mild steel deformed (TMT) 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specifiedf and directed.
All as per serial item No above herein before but MS deformed steel (TMT) 6 to 8 mm dia.
Taking down carefully any type of copper/aluminium point wiring (light,fan, socket or power) complete including conduits/casing caping with fittings such as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed
M&L point wiring for one light point with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc controlled by one switch complete all as specified and directed by Engineer-in-Charge. Make: Conduit-AKG/ Atul/ Kalinga/Modi/Precision/Modi Wire - Havells/ Polycab/ Finolex / Anchor Note : 1. In case cutting & chasing of conduit is encountered with any beam / column/Stone wall, the ISI Marked PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion. 2. No cutting & chasing shall be done on ceiling surface for laying PVC conduit for ceiling fan point wiring etc, hence the PVC casing & capping or surface conduit will be used for the same. 3. In place of terminal box on stone wall, PVC gang box/rectangular box for mounting switches/sockets/regulators with back and front cover will be used.
All as per item No. 190.00 above but for Lamp holder point controlled by one 6 Amp switch one way complete all as specified and as directed.
All as per item No. 190.00 above but for one ceiling fan controlled by one 6 Amp switch one way complete all as specified and as directed.
All as per item No. 190.00 above but for one exhaust fan controlled by one 6 Amp switch one way complete all as specified and as directed.
All as per item No 190.00 here in before, but for one Switch socket 6 Amps, 2-in-1 on same board complete all as specified and as directed
All as per item No. 190.00 above but for one 6 Amps, 2-in-1 switch socket out let flush type on the independent board complete as directed.
All as per item No. 190.00 here-in above but with 2.5 Sqmm copper conductor cable along with one run of 2.5 Sqmm copper conductor cable green in colour for continuous earthing for One 16Amps socket point on the independent board controlled by one switch complete all as specified and directed by Engineer-in-Charge.Make: Conduit-AKG/ Atul/ Kalinga/Modi/Precision/Modi Wire - Havells/ Polycab/ Finolex / Anchor
Supply and fix in replacement ceiling rose 6 Amps, 3 plate, 240V, 50Hz complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA / SSK
Supply and fix in replacement switch piano flush type 6 Amps, one way, 240V, 50Hz complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA/ SSK
Supply and fix in replacement socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA / SSK
S&F, in repalcement, of Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA / SSK
S&F, in repalcement, of Socket, 6 pin, 16 Amp, , 240 volts, complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA / SSK
S&F, in repalcement of angle/batten type Lamp holder, metal cased, bakelite body, 240 volts, complete all as specified and directed. Make: Havells(Reo) / Anchor/ CONA / SSK
Supply and fix in replacement switch type electronic fan regulator rotary type in 5 steps, 240V, 50Hz complete all as specified and directed. Make: Havells(Reo) / Goldmedal/ SSK /GM
Supply and fix in replacement MCB distribution board, SPN, 8 way in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Make : Standard / Indo Asian / L&T / Havells Note: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge.
Supply and fix in replacement MCB distribution board, SPN, 6 way in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Make : Standard / Indo Asian / L&T / Havells Note: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge.
Supply and fix in replacement MCB distribution board, TPN 4Way in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge. Make : Standard / Indo Asian / L&T / Havells
S&F in replacement MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.Make : Standard / Indo Asian / L&T / Havells
S&F in replacement MCB SPN 40 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.Make : Standard / Indo Asian / L&T / Havells
S&F in replacement MCB SP 06 to 32 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.Make : Standard / Indo Asian / L&T / Havells
S&F in replacement Mini MCB SP 25 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.Make : Standard / Indo Asian / L&T / Havells
S&F in replacement of MCB protected modular type AC/Geyser box complete with and incl 6 pin socket, plug top, modular cover plates, mini MCB SP 25 Amp capacity, fixed on concealed modular type metal flush box of suitable size, complete all as specified and directed. Make : Standard / Legrand / Havells
Supply and fix in replacement LED batten with CRCA sheet steel body box type pre-wired suitable for and including provision of 1x20 Watt (4 feet) retrofit LED tube with PC body, full white and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge. Make: Philips / Havells / Wipro / Bajaj / Osram
S&F of surface mounting LED light fitting 10 watt (2 feet long), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal with twin core, PVC insulated, PVC sheathed flexible copper cable of suitable size, complete all as directed. Make : Philips / Havells / Wipro / CG / Polycab / Syska
Taking down existing sub main wiring of aluminium / copper of 4/6/10sqmm size incl all accessories complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering etc, complete all as directed.
M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge for the following sizes:- Note: (i) Three runs of copper cable and one run of PVC conduit shall be measured as one unit length (ii) Five runs of copper cable and one run of PVC conduit shall be measured as one unit length (iii) In case cutting & chasing of conduit is encountered with any beam / column/Stone wall, the PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion as directed.
2x6 Sqmm + 1x6 Sqmm
2x4 Sqmm + 1x4 Sqmm
Taking down Exhaust fan of any size carefully, dismantling blades and Cutting and removing of old burnt/damaged winding, cleaning of slots and other parts and rewinding the exhaust fan motor with super enameled copper winding wire of existing gauge with suitable class of insulation, applying varnish, heating, drying, assembling and testing for satisfactory performance and refixing after repair in its existing or new location and connecting up including provision of cable from ceiling rose or connector to exhaust fan and testing for satisfactory functioning complete all as specified and directed by Engineer-in-Charge.
supply and fix in replacement of capacitor 4mfd, 240V with complete connection all as directed.
Supply and fix in replacement ball bearing suitable for exhaust fan of any size complete all as specified and directed.
ARTISTIC BUILD CO
M/S AADI TRADERS
M/s JS Constructions
M/s Jagdish Chandra Arora
FTH Traders
HARNAM SINGH ANIL SINGH
Yashoghan Construction
RAM SARAN SAHU
RAJ CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .