SITC of Sound reinforcement

SOUND REINFORCEMENT SYSTEM

Supply, Installation, Testing and Comminssioning of 2 Way Full Range Active Line Array Speaker system for FOH Left. Frequency Range (-10 dB) - 44 Hz to 20 kHz, Maximum Peak SPL at 1m 131 dB SPL, Nominal Coverage 90 Degree (H) x 18 Degree (V), 12" LF Driver, 1.75" Diaphragm Compression Driver, 500 Watts + 500 Watts Class D Power Module, Power, Attenuation, LF Setting, Array Size (1-5) & Front LED (Power/Limiter/Off) Controls, Power, Signal, Standby, Limit Indicators, Balanced XLR Line Level Input Connector, Balanced XLR Full Range Line Level Output Connector, Remote Attenuation Control Connector, Locking PowerCon AC Power In & Out Connector, On Demand 50 mm Variable Speed Fan for Cooling, Amplifier Protection : Thermal Limiting, Output Overcurrent & Overtemperature Muting Transducer Protection : Thermal Limiting & Excursion Limiting, Impact Resistant ABS Enclosure, Rugged Powder Coated Steel Grill Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing and Comminssioning of 2 Way Full Range Active Line Array Speaker system for FOH Right. Frequency Range (-10 dB) - 44 Hz to 20 kHz, Maximum Peak SPL at 1m 131 dB SPL, Nominal Coverage 90 Degree (H) x 18 Degree (V), 12" LF Driver, 1.75" Diaphragm Compression Driver, 500 Watts + 500 Watts Class D Power Module, Power, Attenuation, LF Setting, Array Size (1-5) & Front LED (Power/Limiter/Off) Controls, Power, Signal, Standby, Limit Indicators, Balanced XLR Line Level Input Connector, Balanced XLR Full Range Line Level Output Connector, Remote Attenuation Control Connector, Locking PowerCon AC Power In & Out Connector, On Demand 50 mm Variable Speed Fan for Cooling, Amplifier Protection : Thermal Limiting, Output Overcurrent & Overtemperature Muting Transducer Protection : Thermal Limiting & Excursion Limiting, Impact Resistant ABS Enclosure, Rugged Powder Coated Steel Grill Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing & Commissioning of 6.5-inch, 2 way, wall-mount loudspeaker for green room. Rated impedance- 8Ω, Transformer Taps- 70V/100V:30/15/7.5 Watts, Frequency Range-60Hz – 20kHz or better, Rated noise power-30 watts, Sensitivity-86 dB SPL or better, Coverage- 130° conical (500 Hz to 5 kHz) or better, Maximum continuous SPL-97 dB, Maximum peak SPL- 107dB or better, Mounting Brackets Included. Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing & Commissioning of 2 channel class-D amplifier with 60 watts/channel into Low-Z loads. 2 channels can also be bridged providing up to 200 watts rms into 4 /8 ohms or 250 watts rms into 70V/100V. Signal to Noise (A weighted, 20 Hz-20 kHz)->100 dB, Frequency Response-20 Hz - 20 kHz, Input Sensitivity-1.23 Vrms (+4 dBu), Input Impedance->10 kΩ, Front Panel Indicators-Power, per channel Signal,Protect/Limit, Controls- 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass on channel pair. Energy Star compliant with all mounting accessories included. Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing and Comminssioning of Array Frame for Line Array Speakers. Material - Aluminium . Supports minimum 5 Units of Line Array Speakers. 10:1 Design Factor Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing and Comminssioning of Ceiling Suspension Mounting for Under Balcony & Upper Balcony Fill Speakers.Make :QSC/Bose/Musictribe/D&B

Supply, Installation, Testing and Commissioning of Digital Signal Processor with 8 mic/line level analog audio inputs, 8 line level analog audio outputs, 8 Flex Channel mic/line level analog audio inputs or outputs, Up to 16 assignable and routeable AEC processor instances, 16 General Purpose Inputs (GPI) x16 General Purpose Outputs (GPO), Input Frequency Response-20Hz to 20kHz @ +21dBu,Input Impedance (balanced)-5K Ohms Nominal, Input Sensitivity Range (1dB Steps)--39 dBu min to +21 dBu max, A/D – D/A Converters - 24-bit, Sampling Rate-48kHz, Input Impedance (balanced)-5K ohms nominal, Output Dynamic Range-> 108dB,Inbuilt 16 Multitrack Player capacity,Front Panel monochrome OLED with capacitive touch buttons for settings. Control and integrate external devices using TCP/IP, RS232 and GPIO. Make :QSC/Bose/Musictribe/D&B

Supply installation testing & Commissioning of Wireless hand held Microphone with frequency range from 794-806 MHz, Audio Frequency Response 50 Hz to 15KHz, Battery life upto 10 Hours with 2AA Battery & Rugged mic with anti-roll ring for lead and back up vocals Make: AKG/Senhesier/Shure

SITC of Wireless lapel microphone with electret condensor, 60 to 20000 Hz frequency response, Unidirectional Cardoid Polar Pattern, 600 ohm output impedance with cable and connector Make: AKG/Senhesier/Shure

SITC of Centraverse CVGD Goosenck microphone with integrated desktop base builtin mute switch with electret condensor microphone with inline preamp, integrated preamp base, cardoid polar pattern, plug and play connection, 18 inch gooseneck length.Make: AKG /Senhesier /Shure

SITC of Wired handheld microphone , dynamic moving coilmicrophone type, cardoid polar pattern unidirectional, 60 to 15000 Hz frequency response, 300 ohms output impedance at 1000 Hz, Built in on off switch Make: AKG/Senhesier/Shure

SITC of Wired instrument microphone , dynamic moving coilmicrophone type, cardoid polar pattern unidirectional, 50 to 15000 Hz frequency response, 200 ohms output impedance at 1000 Hz, Built in on off switch Make: AKG/Senhesier/Shure

Supply of 32U AV RACK with front glass door and lockable rear door, 4 shelves fan tray, necessary Power Strip and wiring, etc complete as required Make - Valrack/ Comrack/HCL/VS enterprises

Supply of Microphone cable - 2 core flexible copper, shielded cable with outer sheath complete as required Make - Crystal , Belden, Falcon

Supply of 1 sq.mm speaker copper cable with Pvc Sheath Make - Crystal , Belden, Falcon

Supply of Connectors and accessories for Audio & Video to complete the Project. Make- Connector/MX/Neutrix/Sunpro HDMI cable Make : Gigatronics/Kramer

SITC of Blue ray DVD Player with full HD Capabilities, HDMI Input with eco and energy saving mode, inbox remote control. Make - Sony, Philips, Panasonic.

VIDEO SYSTEM

SITC of 1 chip DLP Projector having 10000 lumens (center) brightness, Center to Corner Uniformity 90% or better, Contrast Ratio : 10000:1. Inputs : HDMI, DVI, RGB. Control : RS232 & LAN. Operating Temperature : 0-45 degree along with suitable accessories. UST Lens Throw Ratio : 0.29 :1 or better. 10,000 lm(center), WUXGA, Laser light source, 1 Chip DLP projector, SDI X 1, HDMI X 1, DVI X 1, BNC X 5, VGA X 1, RS232 IN/OUT X 1, LAN X 1, Remote IN/ OUT X 2, Digital Link (HD Base-T), 20,000 hours life, Edge blending, Geo. Correction, 360 deg rotation, Auto screen adjustment software compatible, 24/7 operation, includes standard lens with throw ratio 1.7 - 2.4 :1 Make : Panasonic / NEC / Sony

SITC of Wall Plate comprising of HDMI and VGA input as input and HdBaseT output over twisted pair complete with face plate and accessories, complete in all respect to the entire satisfaction of engineer incharge (Make: Crestron, Kramer, Lightware,)

SITC of HD BaseT with Ethernet, RS–232, IR & Stereo Audio Switchable DA , complete in all respect to the entire satisfaction of engineer incharge (Make: Crestron, Kramer, Lightware,)

SITC of Receiver with RS–232 & IR over Extended–Reach HDBaseT , complete in all respect to the entire satisfaction of engineer incharge. (Make: Crestron, Kramer, Lightware,)

SITC Of 4x2 ultra high-definition 4K/60 digital AV switcher,For standalone use, or as part of a fully integrated system, Fully operable using onboard controls, a Web browser, or a Crestron control system, Simplified setup through the front panel OLED display or Web browser, Four HDMI® inputs and two independent HDMI outputs,DVI and DisplayPort™ Multimode compatible,QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching,Comprehensive built-in EDID configuration tools,Handles Dolby® TrueHD, DTS HD® formats, and uncompressed 7.1 linear PCM audio,High-speed Ethernet LAN connection Compact, low-profile surface mount design. (Make: Crestron, Kramer, Lightware,)

SITC Of Audio De-Embedder (Make:Custom)

STAGE LIGHTING

SITC of fabricated ladders of size 600 x 1500 mm made using 40NB barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint provided in between side wings. (Make: Leksa, Effectron, Canara)

SITC of Direct Power distribution Control panel having incomer 63 ATPN, and 1no. 32ATP MCB & 82 nos 10A SP MCB. Necessary phase indicator lamp, meter , and Busbar to be provided. The panel must have undergone through various chemical treatment to keep them rust free and dulypowder coated in Siemens Grey finish. MCB's to be Havells, ABB, MG. (Make: Leksa, Effectron, Canara)

SITC of MS lighting junction box made up of 16SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand5/15A Anchor Socket with suitable glands. (Make: Leksa, Effectron, Canara)

SITC of MS sheet metal fabricated DMX junction box made up of 16 SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand fitted with 3/5 pin XLR DMX connector. (Make: Leksa, Effectron, Canara)

MS Fabricated power junction box (PJB) for terminating the motor wires undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finish. (Make: Leksa, Effectron, Canara)

SITC of Well designed and engineered Wall mount 02 feeder Motor Control Centre Panel with 125A McCabe as incomer and 32A TP MCB as outgoing necessary meterings, contactors etc. to control the Light Bars, Frill Bars etc. (Make: Leksa, Effectron, Canara)

SITC of Well designed and engineered Wall mount 2 feeder Remote Control Panel with necessary indicators and terminal block for remote operations of curtains. (Make: Leksa, Effectron, Canara)

SITC of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 3/5 pin XLR DMX IN connector for console. (Make: Leksa, Effectron, Canara)

SITC of MS sheet metal fabricated power junction box undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 2 10amps 3 pin IEC socket, ON/OFF switch and necessary glands to power splitters and console. (Make: Leksa, Effectron, Canara)

SITC of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatement to keep them rust free and duly powder coated and fitted fitted with 3/5 pin XLR DMX IN connector for console. (Make: Leksa, Effectron, Canara)

SITC of 200W LED Fresnel spot Light with 200mm dia Germen Lens with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature 3200K ,CRI > 95, spot - Flood Focus adjustment : Mototrised, Beam angel - 10° - 50°Power Rating - IP 20 , Control Manual , DMX0-100% through manual and DMX , Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz CE Certified (Make: Philips, Effectron, Canara)

SITC of 200W LED PARCAN with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature CW/WW , Power Rating - IP 20 , Control Manual , DMX, Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz , CE Certified (Make: Philips, Effectron, Canara)

SITC of 54x3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W RGBW LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional) Function - Manual dimming, DmX modes of operation. The work shall be completed in all respect as per sound engineering practice & Direction of EIC. (Make: Philips, Effectron, Canara)

SITC of 108x3W RGB Light with below specs: LED POWER: 108pcs * 3W, LED Color: CW & WW, Led Lamp: Imported LED, LED Life Time: over 50,000 hours Power supply:Voltage: AC100-240V , Max.power consumption: 220W, Optics:Fixed Lens: 180° , LED Life Time: over 50,000 hours, :Light body: Die casting Aluminum , Touch screen: LCD with touch screen with DMX Control , Control System: DMX, Auto run and Master/Slave , DMX Channels: 1/3CH, Working Environment : Working Temperature: -30~40℃ ,Cooling system: No noise fan.(Make: Philips, Effectron, Canara)

SITC of 2x2 blinder matrix fixture with advanced COB LED technology light with below specifications:-• Frequency : 50-60Hz• Power Consumption: 240W• LEDs Qty : 4 pieces• Light Color: Single color warm white (3200K)• Lifetime: Over 50,000 hours• Dimmer: 0~100% linearly adjustable• Beam Angle: 30 degree• Control mode: DMX512,Master/Slave, Auto Run, Sound active.• IP Grade: IP20• Net Weight: 5kgs The work shall be completed in all respect as per sound engineering practice & Direction of EIC. (Make: Philips, Effectron, Canara)

SITC of 200W LED Profile light 19 degree with below specifications :- Lamp Power : LED, 200W Power Supply : AC 110-230V, 50Hz Focus : Manual Focus , Beam Angle : 19° , Dimmer : 0-100% linearly adjustable manualy focusable, high quality optical system,glass reflector. DMX Control protocol: DMX 512. , CRI : >90 , Dimming : 100 - 0% dimming • Control system : DMX,Auto run and master/slave, Working temp : 30-40 degree celcius,No noise fan of pccooler, Protection Rating : IP20 , CE Certified (Make: Philips, Effectron, Canara)

SITC of 310W 7R Beam moving head complete with MSR 7R Lamp, Prism, Gobos, Colour effect functions with below specification: • Pan : 540° (16 bit ) Tilt : 270°(16 bit ) Advanced moving system: fast, stable and quiet, auto X-Y repositioning • Shutter: 0 – 100% Dimming and variable strobe • Option of Male female DmX in/out through 3 & 5 Pins • 14 di chroic filters +open, Duo rainbow effect • 18 rotating, indexable, gobos+open • Rotating prism: Dual 8 Facet • DmX 5pin Connectors • Power Loop-in Loop-out Optional • Focus: motorized focus • 7 Pre built programming • Electronic Flicker free operation • Dimension 415 x 343 x 495mm • LED Display Indication Make: Philips/ Effectron / Canara

SITC of Diecast aluminium "C" clamp with safety pin. SWL 100 Kgs. Make - Custom

SITC of Rack mount photo isolator DMX splitter unit 1 DMX input and 8 isolated output with following specifications: Power Supply: 90-240V AC, 45-63Hz. Control: DMX 512 protocol. Control Signal input: 5 pin XLR female. Size: 482 x 44 x 128mm. Weight: 2Kg (Make: Leksa, Effectron, Canara)

SITC of Lighting console shall support the processing of up to 512 total DMX512 outputs by use of potentiometers for playbacks and effects as well as buttons to activate cues. The console shall support up to 40 control channels for the purpose of controlling dimmers for incandescent loads. The console shall support up to 30 automated luminaires with a maximum of 40 attributes each. Each intensity channel shall be controlled on a Highest Takes Precedence (Make: Effectron, Canara, Philips, Avolite)

SITC of hot dipped GI perforated cable trays of size 40x75x40 x1.6 mm.

SITC of hot dipped GI perforated cable trays of size 40x300x40 x1.6 mm.

SITC of 3/5 pin XLR male / female connectors (Make: Neutrik, MX, Sunpro)

SITC of Wall Mount 9U Rack with front glass door 4 way Power strip, etc.for mounting splitters (Make : Custom)

SITC of PVC Copper unarmoured flexible FR insulated multicore cable 1100V grade confirming to IS694 size 3c x 2.5 sq mm. (Make: Falcon, Finolex, Polycab)

7 core 1.5 sqmm unarmoured cable (Make: Falcon, Finolex, Polycab

SITC of DMX signal cable for DMX network. (Make: Falcon, beldon, Krystal)

Godrej & Boyce Mfg Co Ltd

EFFECTRON LUMINEX LIMITED

SRISHTI ENTERPRISES