REPAIR MAINT TO PLASTERING PERIODICAL SERVICES SANITARY FITTINGS PLUMBING JOINERY FLOORING ETC AND CERTAIN ALLIED WORKS TO GOVT ACCN UNDER ZONE B AND C OF AGE BRI AREA UNDER GE MIS MHOW

Amount

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling of existing brick work complete all as specified

All as per item No 01 above but except bricks dismantling of existing brick work complete all as specified .Note:Serviceable bricks obtained from dismantling shall be reused.

M&L for rendering 15mm thick plaster in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement including takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

M&l for rendering 5mm thick in cement mortar 1:3 on ceiling / concrete surface mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Supply ony liquid water proofing compound

M&L for preparation of newly plastered surfaces of wall , pillasters, cornices etc and applying of two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm comlete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying of one coat of white wash complete all as specified

M&L for newly plastered surfece of wall and applying two coats of oil bound distemper over a coat of Chawlk whiting /cement based wall primer complete all as specified

M&L for glazed ceramic coloured tiles 300X200X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 and including dismantling of old tiles complete all as specified.

M&L for glazed ceramic coloured tiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 and including dismantling of old tiles complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 and including dismantling of old tiles complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 and including dismantling of old tiles complete all as specified.

M&L for Scratch free,double charged, vitrified ceramic tiles of size 600X600mm x 9 to 10mm thick jointed in neat cement slurry and ponited in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6 and including dismantling of old tiles complete all as specified

All as per item No 14 above but in skirting over & including 10mm thick rendering in CM 1:4 and including dismantling of old tiles complete all as specified

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapet wall over and including 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) mixed with marble dust with admixture of pigment to match with shade of granite colour all as per direction of GE including dismantling existing granite slab of any description .

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing including dismantling existing kota stone slab of any description complete all as specified

All as per item No 17 but in skirting over and including 10mm thick rendering in CM 1:4 including demolition of existing slab complete all as specified

M&L for rounding of edges of stone slabs such as granite,kota stone etc as in steps, cooking platform and other similar situations complete all as specified

M&L for grinding and polishing the existing kota stone surfaces as in floor/skirting/dado etc complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX25 to 30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including dismantling of existing tile of any description all as specified

All as per item No 21 but except chequered cement concrete tiles including dismantling of existing tile of any description all as specified .Note:Serviceable chequered tile obtained from dismantling shall be reused.

M&L for chequered cement concrete tiles with grey cement and pigment of size 20cmX20cmX25 to 30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including dismantling of existing tile of any description all as specified

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

All as per item No 17 but except machine pressed rubber moulded precast concrete interlocking paver block including dismantling of existing paver block complete all as directed. .Note:Serviceable paver block obtained from dismantling shall be reused.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified including demolition all as specified

M&L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays finished even and fair complete including demolition of existing concrete all as specified

M&L for 100 mm thick PCC 1:2:4 type B2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays finished even and fair complete including demolition of existing concrete all as specified

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thick as in flooring, coping etc finished the surfaces even and smooth with using extra cement complete all as specified

M&L for providing PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortar and making good the dismantled portion in PCC 1:2:4 type B1 using 20mm graded stone aggregate and finished the disturbed portion of external surfaces as per existing complete all as specified.

M&L for cutting holes in brick walls built in cement mortar exceeding one brick but not excedding two brick thick to connect down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick CM 1:3 and making good the dismantled portion with PCC 1:2:4 type B1 using 20mm graded stone aggregate and finished the disturbed portion of external surfaces as per existing complete all as specified.

M&L for water proofing treatment to sunken floor surfaces of RCC slab by providing the following specification including removing of old treatment of any description completely and cleaning existing surface all as specified and directed. (a) Provide PCC (1:1.5:3) Type A0 using 12.50mm graded stone aggregate in slope avarage thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW 100+ manufactured by Dr Fixit or Equivalent as approved by GE. (b) M&L for rendeering 15 thick in CM 1:3 mixed with and including water proofing compound on sides of (Vertical surface) Sunken/RCC slab/Parapat wall (c) Appy first coat of Dr Fixit fatsflex with a stiff nylon brush and leave it for 4 to 6 Hrs to dry (d) Apply second coat Dr Fixit fatsflex with a stiff nylon brush to the opposite (ie) direction of 90 degree to the first coat and leave it for 4 to 6 Hrs to dry (e) Apply third coat Dr Fixit fatsflex with a stiff nylon brush to the opposite (ie) direction of 90 degree to the secod coat and leave it for 4 to 6 Hrs to dry Note :(a) Floor area only shall be measured for payment purpose.(b)Testing of sunken portion shall be carried out all as directed by Engineer-in-Charge at site

S&F in repair vitreous china squatting Pan “Orissa” Pattern of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) and squatting pan and trap, including connection to trap, and to fushing pipe , antisyphonage pipe, etc comlete including provision of cement concrete bedding and making to floor all as specified and directed.

S&F in repair wash hand basin vitreous china of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified

S&F in repairs pedestal pattern vitreous china wash down water closet pan white colour with 'P' Trap including joint run and lead front or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphonage pipe, plastic water closet seat cover white closed pattern with flat bottom and cover complete all as specified

S&F in repair vitreous china uninal bowl type coloured, with PTMT urinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in white cement complete all as specified

S&F in repairs urinal spreader of PTMT any colour suitable for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S& F in repairs mild steel chromium plated health faucet with 1m SS tube and hook complete all as specified

S&F in repairs chromium plated jet for EWC with 1.00 m SS pipe including necessary GI fitting as required at site like nipple etc all as specified

S&F in repair fancy type chromium plated two way bib cock of 15mm bore screwed for iron pipe or brass ferrule etc complete all as specified

M&L for repairing low level flushing cistern (ie) adjustment of syphon washer,adjustment of handle, float valve as required and making the cistern fuctional in all respect complete all as specified and directed.

S&F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified

S&F in repair Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified

S&F in repair of CP fancy type stope valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repairs CP fancy type angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified

S & F in repair of CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repairs spindle brass for concealed stop cock 15/20mm bore size all as specified a

S&F in repairs CP brass fancy type shower rose 15mm dia , 125mm long with CP nipple of approved quality complete all as specified

S&F in repairs 15mm dia brass CP wall mixier for Hot & cold water screwed down for iron pipe and fixed all as specified

S&F in repairs soap dish chromium plated fixed with brass nuts all as specified

S&F in repairs toilet paper holder brass chromium plated

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guildies embedded in cement mortar (1:3) with MS screws complete all as specified

S&F in repair LDPE pipe 32mm bore fixed to wall / ceiling with bends / elbow complete all as specified.

S&F in repair stainles steel grating round type 150mm size of (Minimum weight 100 gms) complete all as specified

S&Fin repair PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S&F in repairs PVC flush pipe of 32mm dia pipe with two Nos of check nuts for connecting low level flushing cistern to EWC complete all as specified

S&F in repairs brass chromium plated waste coupling 32mm bore for WHB complete all as specified.

S&F in repairs brass chromium plated waste coupling 40mm bore for sink complete all as specified.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified

S&F in repairs PVC waste pipe suitable dia fixed to any type of coupling of length n.exc 1.50 m complete all as specified

S&F in repairs PVC waste pipe 40mm bore for sink / urinal

S&F in repairs stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed.Note:- Size of plate rack shall not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacity complete all as specified.

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 litres capacity complete all as specified.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 Ltrs capacity complete all as specified.

S&F in repair PVC tank Cover suitable for OHT of 500/1000 Litres capacity complete all as specified

S&F in repair gun metal gate valves 20 mm with lever arm screwed both ends for iron pipe complete all as specified

S&F in repair gun metal gate valves 25 mm with lever arm screwed both ends for iron pipe complete all as specified

S& F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 600mm long complete all as specified

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified

S&F PVC (SWR) multi-floor trap 75mm diameter of outlet ,plain with grating including jointing with solvent cement complete all as specified

S & F in repair PVC body bathroom cabinet of size 550 x 450mm with mirror 5.5mm thick complete all as specified.Make :Prayag & Model No 555 or other equivalent as approved by GE.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm size all as specified .

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified

S&F PVC ( SWR) bends any radius bore of 75 mm all as specified

S&F in repairs 25mm dia Stailess steel curtain rod as approved by GE complete all as specified abd directed.

S&F in repairs 25mm dia stainless steel decoaratve brackets brackets with approved by GE complete all specified

S&F in repairs CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings as in concealed water tubing ,cutting not exc 10 cm girth on walls/ceiling or laying in floors including cutting chases, pinning in and making good to facings where required and pointing in cement mortar 1:3 and making good the disturbed surface as per existing complete all as specified.

Taking up or down steel tubing 15mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified

Taking up or down steel tubing 20mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified

Taking down door shutter with frame not exceeding 1.5 Sqm each without taking off shutter from the frame complete all as specified

S&F factory made steel window with side hung shutter including projecting hinges with steel handle, stay complete devetailed or welded complete all as specified.

S&F factory made steel window with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified.

S&F steel ventilator fixed type with glazing bar complete all as specified

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified

Taking down shutters of any description area not exceeding 1.00 Sqm all as specified

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm all as specified

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified

M&L for pressed steel frame of size 105X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified

M&L for pressed steel frame of size 165X60mm for doors withone or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified

S&F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane complete including hacking out complete all as specified

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan incl hacking out complete all as specified and directed.Note: Glass repairing work shall be carried out upto G+3 Storied building

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including steel sheeting or other covering ) also fastening and fixing complete including dismantling.

S&F mild steel roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket ,framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete including dismantling of old iron all as specified

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete including dismantling all as specified

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified

S&F 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified

S&F in repair 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified

S&F in repair 100mm long butt hinges medium weight cold rolled mild steel

S&F in repair 75mm long butt hinges medium weight cold rolled mild steel

S&F 200 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F 150 mm size aluminium anodized handle

S&F in repiar 150 mm size aluminium anodized handle

S&F in repiar 100 mm Hasp and staple, mild steel wire type fixing in almirah (wooden /steel)including bolt to hinges and fixed with screw complete all as specified

S&F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified

S&F in repairs of aluminum floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified

M&L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm in width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified

S&F in repair 18/19mm thick block board grade 2 quality, interior grade, commercial type as in shelves and partitions of cupboards fixed with screws to under frame work including 6 mm thick teak wood lipping edging on all sides complete all as specified

M&L for 19mm thick prelaminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board all as specified and directed,

S&F plain solid stright chowkhats and frames,wrought framed rebated on the solid,rounded or chemfered,put togather with glue pinned at joints all as specified

S&F continuos (Piano) hinges mild steel, bright finish or electrogalvanized 30mm width flap ( When open) type all as specified

M&L for welding in repairs not exceeding 2.5 cm in length to the thickness of metal to be welded exc 9mm but n.exc 20mm complete all as specified

M&L for preparation of surfaces and writing (Block, Roamn, Italic or Indian) building No to a height not less than 50mm and width not less than 15mm with synthetic enamel paint complete all as specified and directed.Note: Total No of letters not exceeding 15nos and shall be measured as Each job

S&F false ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm of approvedtexture, design and pattern pinhole 8mmthick semiperforated square edge tile having NRC( noise reduction cogfficient ) of 0.50(minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476(PART-4) fire performance as per BS : 476(PART 6&7) humidity resistence of 100% thermal conductivity <0.043W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on silhouuetter proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32MM of lenght1200mm and secondary intermediate cross-T of size 15 X32mm of lenght 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steel item, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall/Partition with the help of plastic rawl plugs at 450mm cetre and 40mm long dry wall SS screws. The work shall carried out as per specifications, drawing and including dismantling of ceiling boardas per direction of the Engineer-in-Charge.

S&F 4mm thick non asbestos cement plain building boards, fixed to wooden frame work with screws including preparation of new surfaces and applying two coat of wite wash in ceiling complete including taking down old sheet of any description

M&L for preparation of old painted wooden surfaces of any description not otherwise description over 10 cm in width or grith and applying one coat of synthetic enamel complete all as specified

M&L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and

M&L for reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforced with welded mesh of weight exceeding 2Kg per sqm but n.exc 3Kg/sqm and apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : Work shall be carried out to the building of any height and quoted rate shall be inclusive for necessary scafolding and safety devices as required at site . Nothing extra shall be admissible. on this account .

M&L for providing following water proofing treatment on inaccessible roof surfaces (horizontal and vertical surfaces) through authorised applicator of manufacturers : (a) Cleaning of new concrete surfaces properly and drying the surfaces and applying 10mm thick rendering over a coat of cement slurry mixed with and including WPC (b) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (c) Applying a coat of Oxidised bitumen based solvent primer @ 0.30 Kg/Sqm (d) providing 3mm thick APP modified water proofing membrane with polyester core, overlaps, sealed and bonded to the surfaces with torch application (e) Applying two coats of bituminous aluminum paint @ 200gm per sqm as per manufactures instructions complete all as specified

M&L for complete removal of existing treatment on External Wall roof projections including facis, cornics etc External surface by Jet washer) by skilled labour and applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over with 1 mm putty and including priming coat of exterior primer applied Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield. complete all as specified and directed.

M&L for complete removal of existing treatment on internal surafaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying two coats of superior quality oil emulsion distember having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat primer including 1 mm thick putty complete, as per manufacturer's specification complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on internal old/new wall surfaces all as per manufacturer instruction complete all as specified

M&L for preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified

M&L for preparing old decorated plaster or un-plastered surfaces of walls and applying two coats of white wash complete all as specified

M&L for preparing old surfaces of walls and applying two coats of cement base paint all complete as specified

M&L for prepration of old concrete / pcc tile surface of any description by brooming with coir/brushes and cleaning and washing the floor surface with water to remove the fine dust and applying two coats of lacquer polish chemical mixed with pigment all as per the manufracturer instruction complete all as specified

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc .including shifting of the existing cooler stand where required complete all as specified and as directed (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter.

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

M&L for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified including dismantling 0f existing sheets.

Taking down Aluminium door, window,ventilator shutters exc 1 sqm but n exc 4 Sqm each and refixing in same opening after reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed .

Taking down wooden door, window,ventilator shutters exc 1 sqm but n exc 4 Sqm each and refixing in same opening after reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed .

Taking down steel door, window,ventilator shutters exc 1 sqm but n exc 4 Sqm each and refixing in same opening after reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed .

M&L for removal of plants /trees of girth n exc 30 cm from roof/sides, external walls of buildings, chajjas, wall junctions, junctions of rainwater / CI soil/waste pipe junction including taking out the roots entered in wall/slab surfaces and making good the disturbed surface with PCC 1:2:4 type B0 or cement mortar (1:2) including the GI/CI/PVs pipe joints damaged during cutting/taking out process to match with the existing and finishing the disturbed surface match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Note: (a) Any CI/AC/PVC pipes or pipe fitting damage during the process of work shall be replaced by new ones without any extra cost to the department. the decision of the GE in this regard shall be final and binding. (b) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exc 1.00 K M all as directed by Engineer-in- charge. (c) For deciding the girth of the plant / tree the height shall be taken at 30 cm above the slab /wall. (d) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be inclusive for the same

S&F in repair Almirah lock (steel/wooden) including all necessary fixing acessories such as screws,nut,bilts as required complete all as specified.

M/S Sunshine Construction

NIDHI CONSTRUCTION