Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC 184 TENGPUNA PULWAMA PULWAMA PULWAMA JAMMU KASHMIR 192301 UDYAM JK 15 0009999 | PULWAMA | JAMMU AND KASHMIR | 192301 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.7 L+₹5.0 L (18.2%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹33.2 L+₹5.5 L (19.9%)Rejected-Finance MALANCHA ROAD KHARAGPUR 721304 DIST WEST MIDNAPORE WEST BENGAL | KHARAGPUR | WEST MIDNAPORE | WEST BENGAL | 721304 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹33.5 L+₹5.8 L (20.9%)Rejected-Finance KHEMASULI P S KHARAGPUR LOCAL DIST PASCHIM MEDINIPUR WEST BENGAL | KHARAGPUR | PASCHIM MEDINIPUR | WEST BENGAL | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹36.8 L+₹9.1 L (33.0%)Rejected-Finance JAIN BUILDING KHARIDA MAIN ROAD KHARAGPUR 721301 WB | MEDINIPUR WEST | WEST BENGAL | 721301 | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | Guru Charan Mahata L4 | M/S BASHIR AHMAD AND SONS L1 | T K Construction L3 | M/S. CONCO CONSTRUCTION L6 | CLASSIC CONSTRUCTION AND SUPPLIERS L2 | Palak Infracon L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 6 to 10 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed.
Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make.
(ii) Masking tape will be used to avoid accidental seepage/spreading of sealant.
(iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost.
(iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up.
(v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics. | 2.5 | 10RM | 1,225 ₹3,062.5 | 1,400 ₹3,500 | 1,400 ₹3,500 | 1,700 ₹4,250 | 1,100 ₹2,750 Lowest | 1,682.64 ₹4,206.6 |
| 2.00 | All as per item No 1.00 here-in-before but, size of joint is 11 to 15 mm wide complete all as specified and as directed. | 450 | 10RM | 1,625 ₹7,31,250 | 1,400 ₹6,30,000 | 1,570 ₹7,06,500 | 3,000 ₹13,50,000 | 1,350 ₹6,07,500 Lowest | 1,850 ₹8,32,500 |
| 3.00 | All as per item No 1.00 here-in-before but, size of joint is 16 to 20 mm wide complete all as specified and as directed. | 425 | 10RM | 1,795 ₹7,62,875 | 1,500 ₹6,37,500 Lowest | 1,770 ₹7,52,250 | 4,000 ₹17,00,000 | 1,700 ₹7,22,500 | 1,900 ₹8,07,500 |
| 4.00 | M&L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 21 to 25 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed.
Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make.
(ii) Masking tape will be used to avoid accidental seepage/spreading of sealant.
(iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost.
(iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up.
(v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics. | 750 | 10RM | 2,000 ₹15,00,000 | 1,500 ₹11,25,000 Lowest | 1,950 ₹14,62,500 | 5,000 ₹37,50,000 | 1,950 ₹14,62,500 | 2,000 ₹15,00,000 |
| 5.00 | All as per item No 1.00 here-in-before but, size of joint is 26 to 30 mm wide complete all as specified and as directed. | 90 | 10RM | 2,560 ₹2,30,400 | 1,200 ₹1,08,000 Lowest | 2,850 ₹2,56,500 | 5,400 ₹4,86,000 | 2,250 ₹2,02,500 | 2,500 ₹2,25,000 |
| 6.00 | Repair to broken spalled edges of joints pot holes etc of existing concrete slab by forming square/rectangular grooves with diamond/Machine cutter wider towards bottom to from key with the existing quality concrete cleaning / dusting the grooves using compressed air to remove all dust and dirt by air blower and repairing with Epoxy mortar after applying epoxy primer and applying one coat of Epoxy resin (Base & hardner, Ratio 2:1) over epoxy mortor, finished complete all as manufacturer's instructions and as directed . | 200 | 1000 Cu CM | 485 ₹97,000 | 300 ₹60,000 Lowest | 490 ₹98,000 | 800 ₹1,60,000 | 450 ₹90,000 | 800 ₹1,60,000 |
| 7.00 | M&L RUN-PATCH RUNWAY/ TAXIWAY/ TARMAC/ APRON Potholes, wide cracks repair polymer modified Asphalt spread sheet for Asphalt & concrete surfaces tape of size 1.00 mx 1.00m width having quick release film off the back of RUN_PATCH before installing it on the existing Asphaltic or concrete surface.Spray it with a chemical(Provided with the material on the sticky side) and paste it on the side for crack surfaces of Runway(Flexible & Rigid portion),PTT, MTT & Dispersal with and including preparation of surface by electric brushes, air blower to clean the crack (joint) or by other mechnical means or Machine as directed by maufacturer,s instruction and paste the sure bond tape of make Srijan systems Pvt Ltd or similar brand as approved by GE on crack surfaces and rolling with hand held wooden/Rubber roller with force complete all as specifed and directed by manufacturer's. | 18 | Per Patch | 620 ₹11,160 | 3,000 ₹54,000 | 599 ₹10,782 | 80 ₹1,440 Lowest | 2,650 ₹47,700 | 2,400 ₹43,200 |
| 8.00 | M&L RUN-PATCH RUNWAY/ TAXIWAY/ TARMAC/ APRON Potholes, wide cracks repair polymer modified Asphalt spread sheet for Asphalt & concrete surfaces tape of size 10.00 m x 1.00 M width having quick release film off the back of RUN_PATCH before installing it on the existing Asphaltic or concrete surface.Spray it with a chemical (Provided with the material on the sticky side) and paste it on the side for crack surfaces of Runway (Flexible & Rigid portion), PTT, MTT & Dispersal with and including preparation of surface by electric brushes, air blower to clean the crack (joint) or by other mechnical means or Machine as directed by maufacturer,s instruction and paste the sure bond tape of make Srijan systems Pvt Ltd or similar brand as approved by GE on crack surfaces and rolling with hand held wooden/Rubber roller with force complete all as specifed and directed by manufacturer's. | 5 | Each Roll | 2,200 ₹11,000 Lowest | 30,000 ₹1,50,000 | 5,500 ₹27,500 | 27,000 ₹1,35,000 | 27,494 ₹1,37,470 | 22,000 ₹1,10,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major MK Yadav, GE
GE (AF) Kalaikunda PO Kalaikunda Air Field Dist Paschim Medinipore State West Bengal Pin 721303
Repairs to joint filling, epoxy and certain other misc works at PTT, loops dispersal and certain other Aircraft Movement at AF Stn Klaikunda
2025_MES_710614_1
C/8143/E8
Open Tender
Civil Works
Item Rate
180 days
AF STN KALAIKUNDA
class D Category a(i)
7 documents required · 7 mandatory
₹500
GE AF KALAIKUNDA
₹90,000
14 Aug 2025
27 May 2025
26 Jun 2025
27 May 2025
24 Jun 2025
10 Jun 2025
Amount
M&L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 6 to 10 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed. Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make. (ii) Masking tape will be used to avoid accidental seepage/spreading of sealant. (iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost. (iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up. (v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics.
All as per item No 1.00 here-in-before but, size of joint is 11 to 15 mm wide complete all as specified and as directed.
All as per item No 1.00 here-in-before but, size of joint is 16 to 20 mm wide complete all as specified and as directed.
M&L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 21 to 25 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed. Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make. (ii) Masking tape will be used to avoid accidental seepage/spreading of sealant. (iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost. (iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up. (v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics.
All as per item No 1.00 here-in-before but, size of joint is 26 to 30 mm wide complete all as specified and as directed.
Repair to broken spalled edges of joints pot holes etc of existing concrete slab by forming square/rectangular grooves with diamond/Machine cutter wider towards bottom to from key with the existing quality concrete cleaning / dusting the grooves using compressed air to remove all dust and dirt by air blower and repairing with Epoxy mortar after applying epoxy primer and applying one coat of Epoxy resin (Base & hardner, Ratio 2:1) over epoxy mortor, finished complete all as manufacturer's instructions and as directed .
M&L RUN-PATCH RUNWAY/ TAXIWAY/ TARMAC/ APRON Potholes, wide cracks repair polymer modified Asphalt spread sheet for Asphalt & concrete surfaces tape of size 1.00 mx 1.00m width having quick release film off the back of RUN_PATCH before installing it on the existing Asphaltic or concrete surface.Spray it with a chemical(Provided with the material on the sticky side) and paste it on the side for crack surfaces of Runway(Flexible & Rigid portion),PTT, MTT & Dispersal with and including preparation of surface by electric brushes, air blower to clean the crack (joint) or by other mechnical means or Machine as directed by maufacturer,s instruction and paste the sure bond tape of make Srijan systems Pvt Ltd or similar brand as approved by GE on crack surfaces and rolling with hand held wooden/Rubber roller with force complete all as specifed and directed by manufacturer's.
M&L RUN-PATCH RUNWAY/ TAXIWAY/ TARMAC/ APRON Potholes, wide cracks repair polymer modified Asphalt spread sheet for Asphalt & concrete surfaces tape of size 10.00 m x 1.00 M width having quick release film off the back of RUN_PATCH before installing it on the existing Asphaltic or concrete surface.Spray it with a chemical (Provided with the material on the sticky side) and paste it on the side for crack surfaces of Runway (Flexible & Rigid portion), PTT, MTT & Dispersal with and including preparation of surface by electric brushes, air blower to clean the crack (joint) or by other mechnical means or Machine as directed by maufacturer,s instruction and paste the sure bond tape of make Srijan systems Pvt Ltd or similar brand as approved by GE on crack surfaces and rolling with hand held wooden/Rubber roller with force complete all as specifed and directed by manufacturer's.
CLASSIC CONSTRUCTION AND SUPPLIERS (BID ID -3326796)
T K Construction (BID ID -3325852)
Guru Charan Mahata (BID ID -3321969)
Palak Infracon (BID ID -3326589)
M/S. CONCO CONSTRUCTION (BID ID -3326526)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .