Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹40.0 L+₹77,137.95 (1.97%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹40.0 L+₹78,123.20 (1.99%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹40.0 L+₹83,944.30 (2.14%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400 708 | THANE | MAHARASHTRA | 400708 | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹40.0 L+₹84,602.97 (2.16%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹36.6 L
EMD Value
₹73,260
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN-913867
PROVISION OF IRON SHED NEAR OFFICERS MESS AND CERTAIN REVENUE AND MINOR WORKS AT REHNOCK AND RONGLI UNDER GE 867 EWS
2022_MES_564312_1
GE/867/TOKEN/40 OF 2022-2023
Open Tender
Civil Works
Item Wise
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹73,260
10 Feb 2023
21 Nov 2022
14 Dec 2022
21 Nov 2022
12 Dec 2022
5 Dec 2022
21 Nov 2022 - 1 Dec 2022
Amount
Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil.
M&L PCC type D-2 (1:4:8) (using 40mm graded stone agg) in foundation filling and mass concrete complete all as specified and directed.
M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose soil complete all as specified and directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point.
Demolition of brickwork or stone/boulder masonry built in cement mortor all as specified.
M & L precast cement concrete type C-1 (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in and setting in CM (1:6) complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat complete all as specified and directed.
M & L Reinforced cement concrete (Nominal mix ) type B1 (1:2:4) (20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.
M&L mild steel deformed bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips complete all as specified and directed.
All as per item No-9 above but 5mm dia and over upto and including 10mm dia in stirrups, spacer and binders complete all as specified and directed.
M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) complete all as specified..
M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement mortar (1:4) with WPC including finished even and smooth w/o using extra cement all as specified.
M & L preparig plastered or unplastered new surfaces of wall and applying three coat of white wash complete all as specified and directed.
S & F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A complete all as specified and directed.
M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described.
S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.
M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface.
M & L for 75 mm thick cement concrete type D-1, (1:4:8) (40 mm graded stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed.
M & L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified..
Non Skid ceramic colour tilles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L screed bed or bedding layer of mortar 10 mm thick for fixing wall tiles in cement mortar (1:4) complete all as specified.
M & L glazed ceramic coloured tiles (300 x 200mm) x 6mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match complete all as specified and directed.
S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.
S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of G.I complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.
S&F 2nd class HW plain, solid, straight chowkats and frames wrough framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed.
M&L 2nd class HW plain framed, panneled shutter 35mm thick (any number of pannels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise described.
Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.
S & F 200mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.
S & F 150mm long aluminium handle cost type anodised complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed
S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed
S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed.
S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed..
S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane.
S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L 75 mm thick PCC type C-2 1:3:6 (40 mm greded stone aggt) for plinth protiction, path/ steps etc to be finished fair and even.
S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
S & F 110 mm bore PVC bends any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed.
S & F 75 mm bore PVC SWR junction single, (Single T) to any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.
S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches complete all as specified and directed.
S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed.
S & F 15mm dia fancy type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, all as specified and directed.
S & F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.
S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms) complete all as specified and directed.
S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and directed.
S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in vitreous china WC pan semi-pedestal pattern (Anglo Indian Type) colour white complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F toilet paper holder with flat recessed type stainless steel fixed to wall complete all as specified and directed.
S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets.
S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked complete all as specified.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified.
M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat complete all as specified.
M & L for form work to sides of pillars, posts, strurs,piers, columns and stanchions in rough finished surfaces of concrete in square, rectangular or polygonal complete all as specified.
M & L RCC type B-1 (1:2:4) (using 20mm graded stone agg) as in foundations, footings, plinth beam etc complete all as specified and directed.
M & L RCC type B-1 (1:2:4) (using 20mm graded stone agg) for columns, pillars, piers, post and struts complete all as specified and directed.
M & L for cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggregate) as in coping complete all as specified and directed.
S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridge all as specified and directed by Engr-in-Charge
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.
M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings.
M&L preparing new surfaces,plastered or unplastered and applying three coats of white wash on undecorated surface of ceiling for AC boards.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise.
M&L joint free non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 20mm screed bed or bedding layer CM (1:6) & pointd in coloured cement to match complete all as specified and as directed.
M&L glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:4) & pointed in colour cement to match complete all as specified and as directed.
S&F gun metal, globe or gate valves of 25mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including all as specified and directed. Make : Zoloto/Leader/ Audco /Kirloskar
S&F gun metal, globe or gate valves of 20mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including all as specified and directed. Make : Zoloto/Leader/ Audco/Kirloskar
S&F Rotational moulded polythene water storage tank ( cylindrical vertical with closed tops ) hoisted and fixed in position of 2000 Ltrs capacity including tank cover and all necessary connection of tank nipple all as specified and as directed. Make : Sintex/Diplast/Polycon
S&F steel water tubing of 25mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground. Make :-Jindal/Tata/Prakash/Surya Roshni Ltd
S&F steel water tubing of 20mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground. Make :-Jindal/Tata/Prakash/Surya Roshni Ltd
S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe complete all as specified and as directed by Engineer-incharge.
M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm complete all as specified.
M & L for PCC (1:2:4) type C 2 using 20 mm graded for padestal copping incl necessory form work finished fair using extra cement all as specified..
Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for LT under ground cable laying and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge.
M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned layers shall be measured.
M&L for common burnt bricks, sub class 'B', of size 250 x 125 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.
Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with solid aluminium conductor of size 10 sqmm 2 core and connecting with necessary lugs complete all as specified and directed by Engineer-in-Charge. Make : Plaza/KEI/Havells
M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc complete all as specified.
M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified.
All as per item No 88 here – in – before but for one 3 / 5 -pin switch socket outlet 5 / 6 amps on independent board.
All as per item No 88 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Supply and fix switch piano flush button, single pole, 5/6 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 / 6 amps flush type all as specified and as directed. Make : Anchor/Havells /Plaza
Supply and fixing lamp/angle holder insulated body with back plate for batten fitting incl LED retro fit lamp B-22 holder base of 10W lamp all as specified and as directed.
Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 6Sqmm 3 core as required at site. Make : Plaza/Polycab/Havells/KEI
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified. Make : Crompton/Bajaj/Usha
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed. Make : Bajab/Usha/Crompton
Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 16 amps flush type universal all as specified and as directed. Make : Anchor/Havells/Plaza
S&F of electric storage type water heater of 25Ltr capacity, 2000Watt, vertical type including necessary angle cock, inlet and outlet water connecting pipe and electric connection complete all as specified and as directed by Engineer-incharge. Make : Crompton/Bajaj /Racold/Havells /Usha
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells/Philips/Crompton
S&F 2' surface/wall mounted LED batten 10 watt, CCT - 5700K, system lumen output not less than 950lm, extruded aluminium housing with high quality Polycabonate diffuser, Operating temperature: -10° C to +45° C, Operating voltage range: 140-270 V, CRI ≥ 80, system efficacy ≥95, including necessary screwing/fixing etc and connecting up with ceiling rose including taking down old u/s light fitting complete all as specified and directed. Make : Crompton Cat part No "LDL-10-CDL" or equivalent in Philips/Havells.
S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC. Cat Part No 5076 11 of Make- Legrand or equivalent in Siemens/Schindler.
S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 2 way 240 Volts AC. Cat Part No 5076 11 of Make- Legrand or equivalent in Siemens/Schindler.
Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.
Supply and fix MCB single pole (SP), 10 kA of 5 -40 Amps capacity 240 Volts, 'C' curve. Cat part no 4085 95 of Make : Legrand or equivalent in Siemens/Schneider
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V all as specified. Make : Legrand/Havells/Siemens /Schneider
M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length.Make : Plaza/ Havells/ KEI
M&L for Earthing in complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.
S&F of Exhaust fan 200 mm sweep 1300 RPM with minimum airflow/air delivery 450 Cmh, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 200-240 Volt AC supply, rated power input not more that 30watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj.
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 15/16 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Crompton/Havells/Philips
S&F Decorative, wall mounting fixture in durable plastic body & designer mesh in gold finish suitable for 14 W retrofi including necessary connection with 0.5 sqmm PVC sheathed 3 core copper cable and 14W LED lamp. model "Glaze" of make : Havells or equivalent in Philips/Bajaj
S&F Sheet metal enclouser double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC. Make- Legrand or equivalent in Siemens/Scheinder.
M&L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc up to 20mm dia all as specified and directed by Engr-in-Charge.
MS BRAHMA CONSTRUCTION
PRASAD PRADHAN AND SON
S K ENTERPRISES
G K SUTHAR
MS MAYA PRAKASH GOEL AND SONS
JAYSHREE CONCERN
RAJU TAMANG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .