Restoration work of damaged boundary wall, water supply line and other works of Canal Colony complex in Delhi state.

Amount

Dismantling reinforced cement concrete work i/c. stacking of dismantled material with in 60m distance with cost of labour and T&P etc.

Dismantling old damaged brick work including stacking of material with in a distance of 60m i/c. cost of labour and T&P etc.

Dismantling old damaged door/windows i/c. cost of labour and T&P etc.

Dismantling old damaged existing plaster including disposal of refuse within distance of 60 meters i/c. cost of labour and T&P etc.

Disposal of malba or scrap material i/c. of all lifts and leads upto 5.00 km. by power transport with cost of labour & T&P etc. required for proper completion of works.

Cement concrete 1:3:6(1cement:2coarse sand:4stone grit size 20-40mm.) in foundation & base conc.including cost of all materials,labour and T&P etc. required for proper completion of work.

Centering & shuttering of C.C. Work Including rent of shuttering material,labour and T&P etc. required for proper completion of work.

Brick work in 1:4(1cement:4coarse sand) cement coarse sand mortar including cost of all materials,labour and T&P etc. required for proper completion of work.

Centering & shuttering of R.C.C. Work Including rent of shuttering material,labour and T&P etc. required for proper completion of work.

Reinforcement steel (Sail/Jindal/Essar/Tata brand) it's straightening, cutting, bending, placing in position and binding with binding wire including cost of all materials,labour and T&P etc. required for proper completion of work.

R.C.C. work in (M20) 1:1.5:3 (1cement:1.5coarse sand:stone grit 12-20mm. size) including cost of all materials,labour and T&P etc. but excluding cost of steel reinforcement .

Cement Concrete in (M15) 1:2:4 (1cement:1.5coarse sand:stone grit 12-20mm. size) including cost of all materials,labour and T&P etc. but excluding cost of steel reinforcement .

20 mm. thick Cement plastering in 1:2(1cement:4coarse sand) cement mortar including cost of all materials ,labour and T&P etc. required for proper completion of work.

12.5 mm. thick Cement plastering in 1:4(1cement:4coarse sand) cement mortar including cost of all materials ,labour and T&P etc. required for proper completion of work.

Sal wood work in chaukhat frame with M.S. hold fast i/c. cost of all materials,labour and T&P etc. required for proper completion of work.

Providing & fixing 32mm. Thick commercial flush door shutters conforming of I.S. 2202 Part-1(1983)i/c. fixing and adjustment of hinges,bolts,locks,handles and springs (excluding cost of fittings) including cost of all materials,labour and T&P etc. required for proper completion of work.

Supply and fixing of 4.5 cm. thick C.P. teak wood glazed shutter in window including all necessary fittings including cost of all materials,labour and T&P etc. required for proper completion of work.

Supply & fixing fly & mosquitos proof stainless steel grade 304 wire mesh gauge with 0.5mm dia. And 1.4mm wire aperature shutters in door,window and ventilator including necessary screws all materials,labour and T&P etc. required for proper completion of work.

Providing wall putty on new surface with approved quality material of berger/J.K./Birla or similar make two coat over plastered surface to prepare the surface even and smooth including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing & laying vitrified floor tiles size 600X600mm with water absorption less than 0.8% and conforming to to IS:15622,of approved make in all colour and shades,laid on 20mm. Thick cement mortor 1:4 (1cement : 4 coarse sand) jointing with grey cement [email protected] kg/sqm i/c. grouting the joints with cement and matching pigment etc. including cost of all materials,labour and T&P etc. required for proper completion of work.

Supply & fixing 6 mm. (1/4") china glazed tiles in flooring or skirting/dado laid with 1:3 cement and coarse sand mortar and polishing including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.

Finishing walls with Acrylic smooth exterior paint two coat of approved make of required shade on old surface by engineer-in-charge to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials,labour and T&P etc. required for proper completion of work.

Distempering two coats with oil bound distemper i/c. cost of all materials,labour and T&P etc. complete.

Painting two coat over primming coat on steel and other metal surface including cleaning the surface of all dirt,dust and other foreign matter,sand papering and stopping including cost of all materials,labour and T&P etc. required for proper completion of work.

Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)-Medium Point including cost of all materials,labour and T&P etc. required for proper completion of work.

Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)- Medium Point including cost of all materials,labour and T&P etc. required for proper completion of work.

Supplying & fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240 V "C" Curve DP MCB complete with connections, testing and commissioning etcincluding cost of all materials,labour and T&P etc. required for proper completion of work. .

Providing & fixing white vitereous china pedestal type water closet ueropean W.C. Pan with seat and lid, 10 letre low level white PVC flushing cistern including flush pipe with manualy controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures including cutting and making good the wall and floors wherever required . W. C. pan with IS marked white solide plastic seat and lid.including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board size 510x1040 mm bowl depth 250 mm including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing 100 mm sand cast Iron grating for gully trap. including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing uplasticised PVC connection pipe with brass unions including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing C.P. brass angle valve for Wash basin mixer and geyser points of approved quality conforming to IS:8931 including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing & fixing M.S. or iron work of small and section such as M.S. grills & railling etc.including rivetting or welding where necessary with cost of all materials,labour and T&P etc. required for proper completion of work.

Providing beldar for nali cleaning,jungle/jhaari clarance and safaai works including cost of labour and T&P etc. required for proper completion of work.

Providing & laying 80 mm. thick factory made C.C. Interlocking tiles/paver including 50mm. Thick compacted bed of fine sand proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope,filling joints with fine sand and below it laying 0.10m. thick base concrete in 1:3:6 with cost of all materials,labour and T&P etc required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 80mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 50mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 32mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.including cost of all materials,labour and T&P etc. required for proper completion of work.

Providing and fixing Gun Metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm. Dia. Nominal bore including cost of all materials,labour and T&P etc. required for proper completion of Work.

Providing and fixing Gun Metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm. Dia. Nominal bore including cost of all materials,labour and T&P etc. required for proper completion of Work.

Constructing masonary chamber 60x60x75 cm. inside in brick work in cement mortar 1:4 (1cement : 4 coarse sand )for the hydrants with C.I. surface box 350x350 mm. top and 165 mm. deep (inside) with chained lid and RCC top slab 1:2:4 mix i/c. necessary excavation,foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm. thick, finished with a floating coat of neat cement complete i/c. cost of all materials,labour,T&P etc. required for proper completion of work.

Rakesh kumar (BID ID -5052017)

M/S PRADEEP ASSOCIATES (BID ID -5051380)

M/S RAVINDRA CHAUDHARY (BID ID -5049752)

M/s B.B.Goyal (BID ID -5044785)