R M of Ground Light Facilities at Chennai Airport during the year 2025 26. SH Procurement of Spares for GLF Installations.

Supply of 200W 6.6A Bi-pin Halogen lamps for Runway Edge light fixture. (Cat No. 64386 Osram or Equivalent) as required.

Supply of 200W 6.6A Halogen lamps with PK-30d base and male connector. (Cat No. 64382 Osram or Equivalent) as required.

Supply of 200W 6.6 A Halogen Lamps with in-built holder with PK-30d base, female connector (Make: Osram Cat no. 64382 HLX-A 200W-15 6.6A PK30d or Equivalent) as required.

Supply of 200W 6.6A Bi-pin Halogen lamps for Runway edge light fixture. (Cat No. 58750 Osram or Equivalent) as required.

Supply of 105W 6.6A Prefocus dichroic coated reflector lamps suitable for inset type light fixtures (Cat No. 64339A of Osram or Equivalent) as required.

Supply of 100W 6.6A Halogen lamps with PK-30d base and male connector. (Cat No. 64342 Osram or Equivalent) as required.

Supply of 48W 6.6A Prefocus dichroic coated reflector lamps suitable for inset type Runway TDZ and Runway Centreline light fixtures (Cat No. 64337B of Osram or Equivalent) as required.

Supply of 48W 6.6A Prefocus dichroic coated reflector lamps suitable for inset type Rapid Exit Taxiway Indicator light fixtures (Cat No. 64337A of Osram or Equivalent) as required.

Supply of AMA Make Bi-pin Lamp holder for 200 W 6.6 A Halogen lamp as required.

Supply of 200W 20/6.6 A 5000 Volts 50 Hz AC Isolating Transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required.

Supply of 200W 6.6/6.6 A 5000 Volts 50 Hz AC Isolating Transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required.

Supply of 100W 6.6/6.6 A 5000 Volts 50 Hz AC Isolating Transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required.

Supply of 45W 6.6/6.6 A 5000 Volts 50 Hz AC Isolating Transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required.

Supply of 10W 6.6/6.6 A 5000 Volts 50 Hz AC Isolating Transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required.

Supply of Secondary lead 2C x 4 mm2 made out of stranded annealed tinned copper conductor EPR insulated, PCP sheathed, unshield type 1.1 KV grade conforming IS 9968-I- 1980 as required with plug and socket of 1m length.

Supply of 0.5m Secondary lead with male connector suitable for Runway HIRL/Taxiway MIRL Elevated type fixtures.

Supply of Connector kit suitable for use in the 5KV grade 1 x 6 mm2 size AFL copper conductor cable.

Supply of Connector kit suitable for use in the 5KV grade 1 x 25 mm2 size AFL copper conductor cable.

Supply of EPR self-amalgamating HT rubber tape having water proof, moisture proof, corrosion and chemical resistive features suitable for 5KV grade AFL cables. Size 25mm x0.76mmx9.1M. (Stanvac Plysafe W963).

Supply of Elevated type Bi-directional High Intensity Runway Edge Light fitting suitable for use with 200W Halogen lamp consists of Halogen Lamp, Lens supporting mechanism, lens clamp mechanism, Central column assembly, Breakable Coupling, two pin secondary Connecting Lead, Base Plate with 6 Nos. M-10 SS bolts with spring and plate washers, Rubber gasket with all other accessories and meeting ICAO/ FAA specification complete as required and as specified : (Lens - Clear/Clear).

Supply of Elevated type Bi-directional High Intensity Runway Edge Light fitting suitable for use with 200W Halogen lamp consists of Halogen Lamp, Lens supporting mechanism, lens clamp mechanism, Central column assembly, Breakable Coupling, two pin secondary Connecting Lead, Base Plate with 6 Nos. M-10 SS bolts with spring and plate washers, Rubber gasket with all other accessories and meeting ICAO/ FAA specification complete as required and as specified : (Lens - Clear/Amber).

Supply of Elevated Omni directional LED Type Medium Intensity Taxiway Edge Light Fittings consists of LED, Lens supporting mechanism, lens clamp mechanism, Omni directional Blue lens, Driver Unit, Central column assembly, Breakable Coupling, two pin secondary Connecting Lead etc. with all other accessories and meeting ICAO / FAA specifications.

Supply of Inset type High intensity Bi -directional Runway Edge light fitting (Clear / Clear) complete with bottom box / Shallow base and all accessories including 2x 105W halogen lamps, lens / filter, reflector with all other accessories and meeting ICAO / FAA specifications complete as required and as specified (Make: ADB Safegate / Youyang).

Supply of Inset type High intensity Bi -directional Runway Edge light fitting (Clear / Amber) complete with bottom box / Shallow base and all accessories including 2x 105W halogen lamps, lens / filter, reflector with all other accessories and meeting ICAO / FAA specifications complete as required and as specified (Make: ADB Safegate / Youyang).

Supply of 1x48W, inset type uni-directional, TDZ light fittings, complete with prism assembly, optical assembly (lens/filter, reflectors etc.), "O" ring seal, pressure relief test plug, 6.6A halogen lamp, filters, die-cast aluminium inner body & outer cover and other accessories complete etc. as required meeting the requirement of latest ICAO Annex 14, FAA compliant and as specifications of Aerodrome Design Manual Part - IV (Visual Aids) latest edition. (without shallow base) (Make: ADB Safegate).

Supply of 2x48W, inset type Bi-directional (Clear/Clear), Centerline Light fitting, complete with prism assembly, optical assembly (lens/filter, reflectors etc.), "O" ring seal, pressure relief test plug, 6.6A halogen lamp, filters, die-cast aluminium inner body & outer cover and other accessories complete etc. as required meeting the requirement of latest ICAO Annex 14, FAA compliant and specifications of Aerodrome Design Manual Part - IV (Visual Aids) latest edition. (without shallow base) (Make: ADB Safegate).

Supply of 2x48W, inset type Bi-directional (Clear/Red), Centerline Light fitting, complete with prism assembly, optical assembly (lens/filter, reflectorsetc), "O" ring seal, pressure relief test plug, 6.6A halogen lamp, filters, die-cast aluminium inner body & outer cover and other accessories complete etc., as required meeting the requirement of latest ICAO Annex 14, FAA compliant and as specifications of Aerodrome Design Manual Part - IV (Visual Aids) latest edition. (without shallow base) (Make: ADB Safegate).

Supply of Inset type Uni-directional Rapid Exit Taxiway Indicator Light fitting complete with bottom box / Shallow base and all accessories including 1x 40W Halogen lamp, lens/filter, reflector with all other accessories and meeting ICAO / FAA specifications complete as required and as specified.

Supply of Full Thread SS 304 Hex Bolt with spring washer, Size: M10x25 for HIRL /MIRL fittings.

Supply of trip indicator fuse TI 300

Supply of high speed semiconductor type HRC fuse, 63A, 690V. (Eaton/Bussman make FE 62a).

Supply of Thyristor Protection Fuse GS 1000/300 (suitable for 50 KW MPCCR )

Supply of high speed semiconductor type HRC fuse, 100A, 690V. (Eaton/Bussman make 100FEa ).

Supply of HRC fuse, 63A Siemens 3NA3 822-7Y,NH00 63 A, 500 V.

Supply of HRC fuse, 100A Siemens 3NA3 830-7Y, NH00 100A, 500 V.

Supply of driver unit of AMA make Taxiway MIRL LED fittings i/c LED, Heating filament etc. complete as required.

Supply of driver unit of VARDHAMAN make Taxiway MIRL LED fittings i/c LED, Heating filament etc. complete as required.

Supply of Base Plate gasket for Elevated type High Intensity Runway Edge Light Fittings. Make AMA.

Supply of AMA Make 360 degree Outer Clear lens for Runway Fitting.

Supply of AMA Make 360 degree Inner Clear lens for Runway Fitting.

Supply of AMA Make 180 Filter for Runway Fitting - Clear.

Supply of AMA Make 180 Filter for Runway Fitting - Red.

Supply of AMA Make 180 Filter for Runway Fitting - Yellow.

Supply of Vardhman Make 360 degree Outer Clear lens for Runway Fitting.

Supply of Vardhman Make inner Clear lens for Runway Fitting - Clear

Supply of Vardhman Make inner Clear lens for Runway Fitting - Amber

Supply of AMA Make 360 degrees Blue lens for Taxiway fitting.

Supply of Vardhman Make 360 degrees Blue lens for Taxiway fitting.

Supply of Spares of ADB Safe gate, High Intensity Bi Directional Inset Light (8") Centreline fittings. MAKE ADB SAFE GATE

a) Connecting wire. Part No. SP.010411 (10 pcs per set)

b) Terminal block assembly with fixing hardware and with cutout. Part No. 1411.21.000

Supply of Spares of ADB Safe Gate, High Intensity Bi Directional Inset Light (12") Runway Edgelight fittings. MAKE ADB SAFE GATE

a) Connecting wire. Part No. SP.010411 (10 pcs per set)

Supply of Porcelain connector with brass screws for AMA make Edge Light fittings

Supply of Two pole plug suitable for Inset type Edge Light, TDZ, Centerline fittings Make: ADB Safegate / Youyang

Supply of LED type Omni directional portable obstruction light units for use in Airfield having input supply of 230 V AC supply and capable to switch over to battery operation in case of failure of electric supply with 16 hours of battery backup with full brightness and the intensity of light shall be as per ICAO Annex-14.

Supply of Elevated Omni directional LED type medium intensity obstruction light fittings, consisting of LED, lens supporting mechanism, Lens clamp mechanism, Omni directional Red lens, driver unit, Central column assembly, Breakable coupling, two pin secondary connecting lead, with base plate etc., with all other accessories and meeting ICAO/FAA specifications

Supply of reflector for AMA make approach fittings

Supply of bird spike for AMA make approach fittings

Supply of Fabric windsock of natural (white) and black with inner lining of length 168 inch in the shape of a truncated cone as per the specifications.

Supply of inner lens gasket for AMA make Runway elevated edge light fitting

Supply of light inner lens locking metal ring (360 degree) for AMA make Runway elevated edge light fitting

Supply of holder bracket fixing screw for AMA make Runway elevated edge light fitting.

Supply of holder fixing screw for AMA make Runway elevated edge light fitting.

Supply of outer metal ring with 03 Nos Knurling screw for Vardhman make Runway elevated edge light fitting.

Supply of spare power converter with output voltage of 34V DC capable of internally illuminating the existing NASU make LED signboards with uniform brightness when operating from 2.8A to 6.6A in Taxiway circuits

Supply of reflector for AMA make 3 lamp PAPI unit

Supply of secondary lead made out of 2C x 4 sq.mm multi stranded annealed tinned copper conductor EPR insulated, PCP sheathed, unshielded type, 1.1KV grade conforming to IS- 9968(Part-I) 1988 as amended upto date etc., complete as required

Supply of LED strip of size 400 mm x 20mm having 24 LEDs, each of high luminous long life 0.5 W LED assembled on aluminium PCB of minimum thickness 2mm for ensuring proper heat dissipation with provision of single non reversible jack at one end for easy replacement of strip at site etc., suitable for illumination of guidance signboards.

Supply of LED module of 2.8 Watt, 24 V DC, IP 66, CCT 6500 K suitable for Airfield signage boards in Operational Area. (Make: OSRAM, Model: BoxLED M Core Product G5 or equivalent)

Please Enable Macros to View BoQ information