Certain repair to joinery, plastering, flooring, plumbing, periodical services and misc for 172 MH, LAO Office, Int Office accn under AGE B/R-II, GE Gurdaspur at Tibri Mil Stn.

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound @3% by weight of cement finishing even and smooth without using extra cement complete all as specified and directed.

All as per Srl item No 3 above but in CM 1:6.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

Dismantling of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

All as per Srl item No 7 above but excep bricks (old dismantled servicesab le bricks obtained from Srl item No 5 here-in-before shall be reused after necessary cleaning of mortar).

M&L for brick work with sub class "B" bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

M&L for prepration of new surfaces and applying two coats of oil bound distemper on walls including 2mm thick wall putty complete all as specified and directed.

M&L for prepration of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation/ complete removal of existing treatment of old decordated surfaces plastered or un plastered of walls and applying two coat of ceemnt base paint including cornices etc complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered of walls and applying two coat of oil bound distemper on wall incl 2mm thick wall putty complete removal of existing treatment complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplaster of walls and applying two coat of oil bound distmeper on wall complete removal of existing treatment complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplaster of ceiling and applying two coat of white wash on ceiling including complete removal of existing treatment complete all as specified and directed.

Taking down chowkats or frames from the opening of size not exceeding 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per Srl item No 17 above but size of opening exceeding 1.50 Sqm but not exceeding 4.00 Sqm.

Taking down shutters of any description of size exceeding 1.00 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

Taking down shutters of any description of size exceeding 1.00 sqm and not exceeding 2.00 sqm each complete and refixing in the same opening after easing and adjustment complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coat of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

S&F powder coated aluminium frame for ddors, windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-in-Charge. (Min thickness of pwder coateing 50 micron).

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm double rebated comprises of glazed & gauged skelton shutter of (required no of gauged shutters and glazed shutters with or without AC opening) ERW section 50mmx20mm & 1mm thick with one and two openable leaf consisting of two number sash bars of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (four Nos for each window) including following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 (i) Hold fast,150mm long mild steel flat iron 12mmX3mm made to shape-04 Nos per window. (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf. (iii) MS Tower bolt 150mm long-02 Nos per leaf. (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf. (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-06-07 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontally

S&F MS box type window/ ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07 with guard bar including primer coat complete all as specified and directed

S&F aluminium powder coated shutter ( for doors) wighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber beading with neoprene packing anodized handle 2 No in each, locking aluminium snap beading screws complete all as specified and directed.

S&F aluminium powder coated shutter ( for window and ventilator) side hung type without sash, aluminium section wighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long ( 1 Nos) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. ISI Marked.

S&F IInd class hard wood glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S & F factory made solid panel pvc door shutter 30 mm thick ( style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) in bed block for hold fast for doors complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F aluminium grill of design No 104 of 10mm thick complete all as specified and directed.

S&F Sheet glass, 5.5mm thick, ordinary quality, in squares exceeding 0.50 Sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed.

S&F in repairs GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified ad directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description from metal frame ) including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

S&F Sheet glass, 3mm thick, ordinary quality, in squares, not exceeding 0.50 Sqm in each pane including wooden beading fixed nails complete all as specified and directed.

All as per Srl item No 39 above but figured glass pin head type & glazing with oil putty.

S&F in repair door closer hydraulically regulated (aluminium die cast body) designation No 3 , universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed.

S&F double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F 300mm long aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F 300 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 100mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 19/20 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

M&L in repair for block boards, 119/20mm thick, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work incl dismantling of old wooden work complete all as specified and directed.

S&F 100mm long hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F continous piano hingees of flaps width 30mm , mild steel bright finish or electro galvanised complete all as specified and directed.

M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of surfaces complete all as specified and directed.

M&L two coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described above including prepration of old painted surfaces complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint over old wooden surfaces exceeding 10cm width or girth including preparation of old painted surface complete all as specified and directed.

Dismantlong floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primises.

M&L for vitrified tiles, dark shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No 60 above but on vertical surfaces and rendering 10mm thick in CM 1:4.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No 62 above but on vertical surfaces and rendering 10mm thick in CM 1:4.

S&F glazed ceramic coloured tiles 300x200x 7mm/ 450x 350x7mm thick set, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

S&F non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic coloured tiles 300x200x 7mm thick set, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

S&F vitreous China squatting pan 'Orrisa' pattren size 580x440 mm white with PVC (SWR) P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/ dismantling old unserviceable WC complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts and seat cover white for pedestal pan with flat bottom and coverf and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC, 32mm dia complete all as specified and directed.

S&F vitreous China wash basin white,flat back size 550x 400mm including PTMT waste coupling 32mm bore , waste PVC pipe and cast copper alloy pillar tap complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type with CP spreader white with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling water tanks exc 250 Ltr & not exceeding 500 Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed.

Dismantling water tanks exc 500 Ltr & not exceeding 1000 Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Refixing 20mm dia steel tubing and connection in new or old position complete all as specified and directed.

S&F 15mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle comlplete all as specifed and directed.

S&F in repairs of brass chromium plated fency type bib taps 15mm bore long nose screwed down for iron pipe or for brass complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for 15mm bore stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified and directed.

S&F 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

S&F in repairs brass chroumium plated shower rose 125mm size all as specified and directed.

S&F in drepair CP flushing jet including pipe for Europian type closet of suitable length with brass check nut complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 900 x 600 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete all as specified and directed.

S&F in repair sinks with drainage board made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge

All as per Srl item No 92 above but laid in trench or in floor.

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 94 above but laid in trench or in floor.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

All as per Srl item No 96 here-in-before but 75mm bore.

S&F 110 mm bore (SRW) vent cowl.

M&L for 75mm bore PVC (SRW) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SRW) junction single/double (Single/double T) equal or unequal with access door complete all as specified and directed.

All as per srl item No 100 above but 75mm bore.

Supply only integral water proofing compound.

Demolotion of cement concrete in ground floors and paving not exceeding 15cm thickness (below or abvoe ground level) and disposing the rubbish to a distance exc 50 mtr but not exc 100mtr away to low lying area complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 0.75 mtr wide 40mm thick PCC 1:2;$ type B-1 (using 20mm graded stone aggregate) as in plinth protection finishing even and fair complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

S&F for 38mm width glass dividing strips 3mm thick and inserted in position to confirm design complete all as specified and directed.

M&L for chequered cement concrete tiles coloured 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with pigment complete in floor including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in, shelves including demolition complete all as specified and directed.

S&F mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not not less than 0.90mm dia or securing with clips complete all as specified and directed.

Use and waste of form work or Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

S&F in repairs MS pipe 25mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod complete all as specified and directed.

Taking down cement plster/deteriorated concrete from bottom of RCC chhajja/RCC facia/ RCC beam or batten/RCC slab/ brick work including racking out joints, hacking for key, crubbing down with water ( at a bldg height upto 3.50 mtr) and removing rubbish to a distance exceeding 50 mtr but not exc 100 mtr away and M&L for 15mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC Chhajja & RCC facia complete all as specified and directed by Engr-in-Charge.

M&L for providing precast cement concrete 1:2:4, type B-0 (12.5 mm graded aggregate) louvres and jallies, 35mm thick( measured solid) , including all mouldings but excluding frame set in cement mortar 1:4 (Precast frame shall be measured separately and paid for under item No 115 below).

M&L for PCC 1:2:4, type B-1 (20mm graded aggregate) set in CM 1:4 in window or door cills, lintels, ressumers, steps, quoin blocks ( for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars , bed plates, pintle blocks, anchorage blocks, bounders ( for stone wall in), corbels, brackets, etc (of any section indicated) with plain fair faces including chamfers weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and directed.

Demolition of reinforced cemnt concrete of any description and in any position not otherwise specifically provided dor complete all as specified and directed.

M/S GAGAN CONSTRUCTION CO

P S BUILDERS