Construction of Steel Trussed Foot Bridge over Ghati Khad near village- Minda in GP-Mundli for the year 2025-26 under APO unit Nerwa

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.50 m, as directed by Engineer-in-charge: Ordinary Rock

Hard Rock (Blasting Prohibited)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottams, and lift upto 1.50 m,including getting out the excavted soil and disposal of surplus excavted soil as directed by Engineer-in-charge: Hard Rock (Blasting Prohibited)

Ordinary Rock

P/L cement Concrete 1:5:10 (1 cement:5 Sand:10 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. carriage of material in all lead and lifts

P/L cement Concrete 1:3:6 (1 cement:3 Sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth. carriage of material in all lead and lifts

P/L cement Concrete 1:3:6 (1 cement:3 Sand:6 graded stone aggregate 20mm nominal size) in retaining walls, return wall, walls (any thickness ) i/c attached pilasters, columns, pires, abutments, pillars, posts, struts, string or lacing courses, parapets, coping, bed blocks, fillets, sunken floor etc. , up to floor five level and curing complete excluding cost of form work . carriage of material in all lead and lifts

P/F work with steel plates 3.15mm thick weldid with angle iron in frame 30x30x5mm so as to give a fair finish including sentring, shuttering , strutting and propping etc. with wooden battens and ballis, height of propping and sentring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concret and plain concret work in: vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string cources and the like. carriage of material in all lead and lifts

Suspended floor roofs, landing and shelves and their support balconies, beams girders bressumers and cantilever up to floor two level. carriage of material in all lead and lifts

Providing and laying in position specified grade of reinforced cement Concrete work 1:1.5:3 ( 1 cement:1.5 Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth. carriage of material in all lead and lifts

Providing steel reinforcement for RCC work including straightening , cutting , bending, placing in position and binding all complete upto plinth & above level. Mild steel and Medium Tensile steel bars carriage of material in all lead and lifts

Supplying, filling of boulder behinjg the wall all lead and lifts complete as per direction of engineer-in-charge

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) up to plinth level i/c curing complete

Steel work bolted/welded in built up sections/framed work,including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc.in all complete. In trussed steel bridge. carriage of material in all lead and lifts

Painting steel work multi surface paint to give an even shade. Two or more coat of approved brand and manufactur. In trussed steel bridge. carriage of material in all lead and lifts

Providing and fixing of sign board with M.S sheet 2.5mm thick duly painted & writing as per the direction of work incharge.carriage of material in all lead and lifts

Please Enable Macros to View BoQ information