Construction of Additional Classroom building of Kandarpur Higher Secondary School, Siddheswarpur at Cuttack

Fly ash brick masonary in cement mortar (1:6) in superstructure using fly ash bricks of 9"/10" size having a crushing strength of not less than 35kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

R.C.C. work in C.C. M-250 using 12 mm to 20mm size (20 mm not be exceed 25%) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying & compacting concrete watering and curing for 4 weeks including smooth, rigid centering, shuttering & finishing the exposed surface smooth with cost, conveyance, royalities and taxes of all materials and labour, T& P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or tor steel and binding wire and labour charges for straightening, cutting, beinding, binding etc. and tying the grills and placing in proper position as per direction of the Engineer-in-charege. a). Column Base 1st Floor

b). Wall Beam 1st Floor

c). Roof Beam 1st Floor

d). Linel 1st Floor

e). Chajja 1st Floor

f). Roof slab 1st Floor

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specification Clauses 1000 and 1200 of MoRD and as per direction of the Engineer-in-Charge. a). 1st Floor

20mm(3/4") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brush laid to proper slope finished smooth to receive tarfelt treatment watering and curring including cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

12mm (1/2") thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

16mm (5/8") thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

6mm thick C.P. in C.M (1:4) to RCC surface finished smooth including slury treatment including watering and curing with cost, conveyance, royality, taxes of all materials & labour with T& P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge. a). 1st Floor

Providng and fixing Vertified tiles in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost, conveyance, taxes of marble / tiles , labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. a). 1st Floor

Providing and fixing Vertified tiles in dados, skirting and riser of steps on 12mm thick cement mortor (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles inlcuding rubbing and polishing with all cost, conveynace, taxes of marble / tiles labour with T& P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. a). 1st Floor

Finishing walls with weather coat of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge. a). 1st Floor

Distempering two coats to walls with distemper of approved shade on new work to give an even shade including scaffolding staging charges with cost conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification & direction of the Engineer in charge. a). 1st Floor

Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure and wood work in proper position etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm to 20mm (1/2" to 3/4") (20mm not to exceed 25% ) with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a).1st Floor

Supplying, fitting and fixing of two tracks UPVC sliding window of approved make with 6 mm thick glass of approvd quality complete with frame, shuters and all fittings and fixtures etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

Painting two coats with any approved enamel paint to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. a). 1st Floor

Please Enable Macros to View BoQ information