GE 874/EWS-08/2021-22

Amount

B/R & E/M Portion

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering.

Dismantling of timber scantlings 40 Sq cm and over in section in any position in unframed work.

Dismantling wall/ceiling board of any description including cover fillets.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises.

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level).

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking down chowkats (without taking off door shutters or frames) area not exceeding 1.5 Sqm each.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each per leaf complete all as specified and directed.

Dismantling water tank exc 250 Litre & n.exc 500Litre capacity and removing to store.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Brick work with subclass ‘B’ bricks straight or curved on plan exc 6m mean radius, built in Cement Mortar 1:6 all as specified and directed

Second class soft wood as in scantling clean sawn fixed in position.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws as specified.

Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws as specified.

Rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats / frame or like etc welding hold fast, hinges complete all as specified.

35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, complete all as specified and directed by Engr-in-charge.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified.

35 mm thick 2nd class soft wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats.

20mm thick, second class soft wood boarding, planed one side, with butt joints and fixed with nails in facia, eaves boarding,(except flooring and skirting) complete all as specified and directed.

Rendering 15 mm thick on other than fair face of brick work in cement mortar 1:6, to be finished even and smooth (without using extra cement).

Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified.

Rendering 10 mm thick in cement mortar 1:6 as in internal on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement.

Preparation of New surfaces plastered or unplastered and applying two coats of cement base paint, white or tinted.

Prepatation New surface plastered or unplastered with chalk whiting and applying two coat of distemper oil emulsion over one coat of alkalic resistant primer complete all as specified.

Preparation of Old surfaces plastered or unplastered and applying two coat of cement base paint over a coat of primer.

Preparation of Old surfaces plastered or unplastered and applying two coat of cement base paint, white or tinted.

Prepatation of Old surface plastered or unplastered and applying two coat of distemper oil emultion paint.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden or plywood surface of any description, not otherwise described n exe 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

Vitrified ceramic tiles 10 mm thick area of each tile but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Non skid coloured ceramic tiles 7 to 8mm thick square/rectangular area of each tile exc 0.11 Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed in CM (1:4), over and including 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

Non skid ceramic tiles 7 to 8 mm thick (square / rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles, lais over & including 15mm thick screeed bed in cement mortar 1:4 complete all as specified.

Joint free glazed ceramic Coloured tiles in vertical surface 300x 200x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface laid over & including 15mm thick cement rendering in cement mortar 1:4 complete all as specified and directed.

Glazed ceramic coloured tiles (300x200) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engr-In-Charge.

16 to 18mm thick marble slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4..

Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs.

Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified.

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed in repairs, complete all as specified.

Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc all as specified.

Factory made solid FRP door shutter, 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardantgrade unsaturated polyester resin mouled to 3 mm thick FRP laminated for forming hollow rails and styles iwthwooden frame and suitable blocks of seasoned wood inside at required places forfixing of fittings, cast monolithically with 5 mm thick FRP panels and confirmign to IS 14856-2000 complete all as specified and directed.

Sheet glass of 3mm,ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified.

S&F in repair 20mm dia aluminium Drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified

Mild Steel butt hinges 75mm long medium weight.

Mild Steel butt hinges 100mm long medium weight.

125mm long aluminum alloy, anodized barrel tower bolt of extruded section.

150mm long aluminum alloy, anodized barrel tower bolt of extruded section.

Aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and directed.

300mm long aluminum alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

Extruding aluminum alloy handles, fabricated type, anodized 125 mm long.

Mild steel pressed handle, oval type stove enamelled, black of size 100mm, complete all as specified.

500 Ltr capacity PVC water storage tank (cylinderical vertical with closed top) and fixed in position all as specified in SSR Part -I.

Rotational moulded polyethylene water storage tank tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

15mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified.

15 mm fancy type chromium plated stop valves/ gate valve, screwed down high pressure,with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

15mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors.

20 mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

Taking down old ceiling and S&F false ceiling with exposed GI powder coated, white colour, grid false ceiling system space using "SILHOUETTE" XL 15mm (nominal) designer grid with 6mm Armstrong white or Global White with black reveal and 600 mm x 600 mm x 15 mm thick prime fine fissured RH 99 micro, look white/coloured tiles(superfine 15mm / silhouette) (M/s Armstrong ceiling tiles) including suspender/ragbolts, plugging to wall/ceiling etc all as per M/s Armstrong ceiling systems complete all as specified and as directed by Engineer-in -charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe including 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level ,white, with inlet ball valve, float and handle including brakets.

PVC valve less syphonic action type flushing cistern 10 ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all connection fixed, complete all as specified and directed.

S & F Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe of 32mm dia and anti-syphonage pipe etc, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, fixed in repair, complete all as specified.

PVC (SWR) bends any radius 110mm bore fixed in repair, complete all as specified.

M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified

S&F in repairs for Cast Iron `P Trap 100mm bore

75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed

100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and directed

S&F in repairs for CI 100mm bends with door.

S&F in repairs for CI 100mm single branch piece with door

S&F in repairs for CI 75mm bends with door.

S&F in repairs for CI 75 mm single branch piece with door

S&F in repairs for cast iron cowls 100 mm size

Supply and Fixing in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and directed

Vitreous China wash basin, white, flat back of size 550x 400 mm incl cutting for and pining, in ends of brackets or erecting stand etc, fixed in repairs, complete all as specified.

Vitreous china Wash hand basin, vertical mounted fancy type flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand and embeded in cement etc, complete all as specified.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plug , washer and waste, includding bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over aal size 495mmx420mm , bowl size 410mm x330mm x 160mm complete all as specified and directed.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm, complete all as specified.

Low density LDPE pipe for pressure rating 6kgf/sqcm complete all as specified.

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed in repairs, complete all as specified.

PVC (SWR) floor trap of diameter of outlet in 75 mm, plain with grating including jointing with solvent cement.

75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.

Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, and fixed, complete all as specified and directed.

CP pillar tap with capstan head chromium plate 15 mm bore fancy type.

Soap dish of vitreous china white of size 160x160x90mm.

Chromium plated shower roses 125mm with or without swivel joints,any size, including fixing to steel pipe or union, fixed in repairs.

20mm dia D type towel rail 600mm long of brass CP fixed with and including CP brass screws complete.

Towel ring of PTMT fixed with all including chromium plated brass screws and wooden/plastic cleats weighing minimum 90grms.

Stainless steel door stopper 150mm long with double legged rubber bushes at the end complete all as specified and directed.

300mm mild steel ordinary rat tail rod patrtern spring including roller and roller plates complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS 456:2000 complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

RCC nominal mix 1:1.5:3, type, A-1 (using 20mm graded crushed stone aggregate), as in beams, cantilevers, bressummers, lintel over 1.5 mtr span, complete all as specified.

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch Socket combination 5 in 1, 5 pin and 15 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

Switch Socket combination 2 in 1, 5 pin and 5 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

Socket outlet 2 in 1, 5 pin, 5A, flush type universal, all as specified and as directed. Make:Havells/Anchor

LED bulb 7 Watts, 6500 K complete all as specified and directed. Make : havells / anchor / Surya/Cropmton

Decorative LED batten for surface and pendent application. Anodized extruded aluminium housting high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20 Watt connecting up with twin core twisted flexible copper conducter cable of suitable size complete all as specified and directed.

LED light fittings 1X9 W bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 volt 50 HZ make Havells, Bajaj, Phillips complete all as specified.

1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire, one twin core cable flat or circular of size 16Sqmm, complete all as specified and directed.

RCBO, singal pole and neutral 240 VOLT 50Hz 10 Ka, 6/32AMPS, 300mA all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Sheet metal enclosure for SPN DBs (double door type), when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 6 to 63 Amps 240 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T.

MCB single pole 6 to 32 Amps 230 Volts'C' series, 10 KA complete all as specified and directed. Make: Havels /Legrand L&T.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified.

Rectangular boards/blocks 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr in charge.

Voltage stabizler for automatic operation, single phase naturally air cooled indore type & designed for input variation between 110 v to 190 V with output voltage stabilzed at 23 V with accuracy of plus or minus 2.5 % 4-6 Sec initial delay and capasity 6.6KVa/30 A Make V-Guard model No VGMW1000PLUS OR Equivalent as approved by Engr-in charge.

AC Single phase smart energy meter of accuracy class 1.0, 240V, 50Hz with Backlit LCD display of rating 10-60 A & with 1 push button. (Measures & Displays KWh, KVAh, V, I, PF, Frequency, KW, KVA, six months history of energy & MD in KW & KVA) with optical port and LoRa WAN based communication alongwith necessary base computer and data collection unit. Transparent Hinge type box. Make HPL or L&T or Secure or equivalent as approved by Engr in charge.

S & F Gun metal Glove or Gate Valve 15mm dia with iron wheel head, screwed both ends for iron pipe.

S & F Gun metal Glove or Gate Valve 20mm dia with iron wheel head, screwed both ends for iron pipe.

S & F Ball Brass Valve 15mm dia, high pressure with polythene float and flynuts complete screwed for iron pipe.

M/S MANZOORAHMAD LONE

POPULARHARDWARESTORE

Bidder Name

M/S ASMATULLAH SHAH

POPULARHARDWARESTORE

M/S MANZOORAHMAD LONE