SPL REPAIRS TO BLDG NO P-52/2 P-52/4 (COOK HOUSE) OF MED REGT AT DIPATOLI UNDER GE DIPATOLI

Amount

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc complete as specified and directed

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete (incl. chajja) and finished the surface fair and even complete as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface fair and even complete as specified and directed.

M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface fair and even complete as specified and directed.

M/L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified.

M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M &L for applying one coats of distemper oil emulsion on old surfaces of wall / Ceiling including necessary preparation of surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M &L for preparation of old plastered surface of wall and applying a coat of cement base paint complete all as specified and directed.

M &L for preparation of newly plastered surface and applying three coats of white wash on ceiling / wall surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall/ ceiling surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beding layer complete all as specified and directed

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting , complete all as specified and directed.

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.

Taking up or down steel tubing and connection of 15 dia bore , complete all as specified and directed.

Taking up or down steel tubing and connection of 20 dia bore , complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth, complete all as specified and directed.

M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position 15mm dia, complete all as specified and directed.

M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position 20mm dia, complete all as specified and directed.

S&F in repair stop valve , cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore.(fancy type), complete all as specified and directed.

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore.(fancy type), complete all as specified and directed.

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. (fancy type), complete all as specified and directed.

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

M/L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, complete all as specified and directed.

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement , complete all as specified and directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed (1:6) and jointed including rubbing and polishing complete as per specified directed.

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed at site, complete all as specified and directed.

S&F in repair Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames , complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required , complete all as specified and directed.

S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required , complete all as specified and directed.

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size , complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) , complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces , complete all as specified and directed.

Dismantling existing water tanks 1000 ltr and removing to stores all as spd and directed.

S&F in repair hoisting 3 layers PVC tank 1000 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified & directed

S & F in repairs Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass , complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size, complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.

M&L PVC (SWR) bend any radius 110mm dia , complete all as specified and directed.

M&L PVC (SWR) bend any radius 75mm dia, complete all as specified and directed.

M&L PVC(SWR) Tee any radius 110mm dia, complete all as specified and directed.

M/L granite (20mm thick) (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including 20mm thick cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed.

S&F in repair vitreous China squatting pattern water closet 'orissa pattern ' size 580 x 440 mm white with integrated foot rests including provn of lime concrete, complete all as specified and directed.

S&F only PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make all as specified and directed

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth, complete all as specified and directed.

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN/TPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 75 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and directed.

All as per Ser item No 75 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed.

All as per Ser item No 75 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly , complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed , complete all as specified and directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed , complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed , complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed , complete all as specified and directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed , complete all as specified and directed.

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site , complete all as specified and directed.

Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed at site , complete all as specified and directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed , complete all as specified and directed.

S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F for highly efficient LED bulbs, 10 W complete all as specified and derected

S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed.

S&F in replacement of building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site.

S&F in replacement PVC ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement , complete all as specified and directed.

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed.

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge.Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

M/S Sweta Construction

M/S SURYA BUILDERS

M/S KAMLESHWAR SINGH

M/S RAMOTAR SAHU

BHARATI ENTERPRISES

M/S SHAMBHU SHARAN SINGH

M/S CITY ENTERPRISES

M/s Ray construction

universal enterprises

M/S.R.S.Chauhan and Sons

M/s Animesh Kumar & Co.

M/S AMOD KUMAR PANDEY

ashiyana electrical company

STAR ENGINEERS AND CONTRACTORS