Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC H NO 114 A 10 GHAZI NAGAR RADDI CHOWKI GOHALPUR JABALPUR MP | L1 | Accepted-AOC Lowest Amount Quoted | |
| 2 | L2₹19.3 L+₹3.4 L (21.1%)Rejected-Finance 316 A VIJAY NAGAR EXTENSION RANJHI MAIN ROAD JABALPUR MP PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L2 | Rejected-Finance Second Lowest Amount Quoted | |
| 3 | L3₹19.3 L+₹3.4 L (21.4%)Rejected-Finance 968 BAPOO NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance Third Lowest Amount Quoted | |
| 4 | L4₹19.4 L+₹3.5 L (21.8%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest Amount Quoted | |
| 5 | L5₹20.3 L+₹4.3 L (27.3%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L5 | Rejected-Finance Fifth Lowest Amount Quoted |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Lt Col P Aditya Deepak, GE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
PERIODICAL SERVICES INCLUDING CLEANING WATER TANK OF UNRESTRICTED AREA OF COD UNDER AGE B/R-II OF GE (EAST) JABALPUR
2024_MES_668117_1
8641/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE (East) Jabalpur
₹60,000
Yes
21 Nov 2024
30 Aug 2024
2 Oct 2024
30 Aug 2024
30 Sept 2024
14 Sept 2024
30 Aug 2024 - 6 Sept 2024
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coats of white wash on prepared ceiling surface complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete complete all as specified and directed.
M&L for applying two coats of Plastic emulsion paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared Wall Care Putty surfaces of brick work or concrete complete all as specified and directed.
M&L for applying two coats of cement based paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared Wall Care Putty surfaces of brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coats of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared Wall Care Putty surfaces of brick work or concrete complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceiling & applying 2 mm thick Wall Care Putty on newly plastered or unplastered surfaces of ceiling complete all as specified and directed.
M&L for applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared Wall Care Putty surfaces of ceiling complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L for providing Cement Concrete 1:2:4, Type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L for Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), Type B-0, 1:2:4 using 12.5 mm graded aggregate including all mouldings but excluding frame, set in CM 1:6 including necessary form work if required complete all as specified and directed.
S&F of Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for complete removal of existing treatment on brick work or concrete surfaces & applying 2mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling surfaces & aplying 2 mm thick Wall Care Putty on ceiling surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on brick work or concrete surfaces & providing & applying plaster of paris putty of 1.0 mm thickness over brick work or concrete surfaces to prepare the surface even & smooth complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre & UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm over brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of white wash on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of cement based paint on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted Wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed.
M&L for preparation of old painted Steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed.
M&L for preparation of old painted surfaces of brick, stone, concrete, asbestos cement or plaster surfaces & applying one coat of Synthetic enamel (ordinary tint) on prepared surfaces complete all as specified and directed.
M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank (Two layered and ISI marked) (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank (Two layered and ISI marked) (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F ball valves for 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F ball valves for 25mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair ball valves for 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair ball valves for 25mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair PVC Tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20mm bore dia of pipe complete all as specified and directed.
Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15mm bore GI tubes 'medium grade' galvanised with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore GI tubes 'medium grade' galvanised with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 Ltr & n.exc 500 Ltr capacity & from mouths of circulating pipes, etc including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note : Any tank damaged during cleaning shall be replaced by Contractor at his own cost. Unit rate quoted to be deemed inclusive of these aspects.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 500 Ltr & n.exc 1000 Ltr capacity & from mouths of circulating pipes, etc including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note : Any tank damaged during cleaning shall be replaced by Contractor at his own cost. Unit rate quoted to be deemed inclusive of these aspects.
M&L for cleaning and removing shrubs plants from roof, chajja, facia or brick wall complete with roots and providing anti vegitation growth chemical spray at any height and making good in CM 1:4. Complete all as specified and directed. Note : All vegetation & plants including their roots for the particular area shall be totally removed. Any damage to the surface shall be repaired either by Plaster in CM 1:4 & Brick Work in CM 1:6 or PCC 1:4:4, type B-1 using 20mm graded stone aggregate as on required basis. Unit rate quoted to be deemed inclusive of these aspects.
Common Note : (i) Work shall be executed in the buildings up to 4th story & contractor has to make his own arrangement for necessary scaffolding & safety of works man/labours. Contractor to write the CA Number & Date of Periodical done on each Qtr/Bldg with Black background of size 1.00m x 0.30m & White letter, height of letter should be exceeding 0.50 cm. (ii) Unit rate quoted to be deemed inclusive of these aspects.
Schedule of credit amount of Rs. 11,655.00 to be deducted during AOC.
M/S A.P.M. CONSTRUCTION CO. (BID ID -3103748)
M/S N K SONKAR (BID ID -3108810)
M/S Anil Enterprises (BID ID -3106362)
M/s Brij Constructions (BID ID -3107327)
B G PANDEY AND BROTHERS (BID ID -3109079)
SHRI KRISHNA CONSTRUCTIONS (BID ID -3100722)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .