SPL REPAIR TO INTERNAL ROAD OF ADM BN AND MT BN OF AMC C AND C UNDER GE (EAST) LUCKNOW

Amount

M&L for repair to pot holes of any depth n.exc 1 sqm each including sweeping free from dust and mud or water scroing sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by by applying tack coat with bituminous primer using paving bitumen VG 30 grade @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2.5 cm thick) well rammed, including rolling depth of potholes n exc 30 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm & depth exc 50 mm and n exc 100 mm complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 5.00 kg per 10 sqm complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

M&L bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix poured in the forms of requisite heights shape and width for rumble strip/speed breaker after lifting of forms, surface finished to required shape and well compacted complete all as specified and directed.

S & F Retro Reflective signage board made out of 600mmx900mmx 2 mm thick aluminuim sheet face to be fully covered with high intensity prismetic (HIP) Retro Refletive sheeting confirming to ASTMD-4956 01 as per colour required, letters and symbols shall be made of same Retro Reflective sheeting duly processed on base aluminum substrate board to be supplied alongwith back supported angle iron frame minimum 25x25x3mm all around and mounted on 75mmx75mmx6mm MS angle iron and this angle firmely embeded 0.60m below from ground level in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) and duly painted with two coats of synthetic enamel paint over one coat of red oxide primer alongwith fixing accessories complete as per MORTH specification in repairs complete all as specified and directed.

BHARAT ASSOCIATES PVT LTD

M/s Ram Singh Agarwal