Construction of Anganwadi Building in melaperumpallam pt in Sembanarkoil Block

Amount

a)Anganvadi

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. 0.3

Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" and conveyance of all materials to site and all labour charges etc complete

I. Foundation and Basement

II. Superstructure- Ground floor

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Below basement

Above basement

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Reinforcement Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

I.Upto Basement

II. Superstructure- Ground floor

Providing floor finish in CM 1:2:4 mix using 20 mm ISS HBG Metal to 50mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Providing Granolithic floor finish in CM 1:2:4 mix using 10-12mm ISS HBG Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Finishing the top roof of with one course of pressed tiles in CM 1:3 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Floor finish with ceramic ties including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Dadooing tiles including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Special Ceiling Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Provision for Cuddapah slab 40 mm tk for Cupboards inclding supply and fixing etc

Fabrication and supply of mild Steel Doors and Windows of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18

i.steel Door Of Size 0.90x2.10m

ii. Steel Door Of size 0.75x1.20m

iii. Supply of window of size 1.20x 1.30 m

iii. Supply of window of size 0.75x 0.9 m

v. Supply of Ventilator of size 0.90 x 0.45m

Labour charge for fixing Doors

Labour charge for fixing Windows

Painting the plastered wall surfaces with two coats oil bound distemper (inside the building) of approved quality and colour over one coat of wall primer including clearing surface in all floors etc complete with standard specification

Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete

Painting two coats with ready mix Block board paint of block colour and trade for Block board including cost and conveyance of all materials and all other labour charges etc., complete.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 25

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 62

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 67

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 80

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 136

Supply and fixing of TNEB meter Board suitable for 32 A single phase service connection with 32 A fuse (500 V) 32 A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375 mm x 300 mm x 40mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire EB meter to fuse unit. (SD No 121)

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 106

Supply and fixing of CF Lamp fitting including angle holder.

Toward EB deposite

B) Borewell

Drilling of borewells anywher in tamil nadu including transpotation from one place to another with in tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc By first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs,fuel,labour and drilling bentonite and water the required for drilling at site including construction of mud pit.

Up to 60m depth

Remaining from 140/150mm dia pilot bore well to 300 mm dia bore . as directed by the TWAD Board Officers upto 60m debth end in "H" from ground level AS PER TWAD RATE (MISCELLANEOUS S.NO 14.b )

Up to 60m depth

Labour charges for inserting 150mm PVC casing pipe assembly in the drilled hole including jointing the pipes with PVC Couplers with cement paste etc. complete and supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board AS PER TWAD RATE (MISCELLANEOUS S.NO 13.a(i) )

Charges for developing the bore well with air compressor of 300 CFM Capacity ( minimum 8 hours ) including transportation, labour and fuel charges for compressor. as directed by TWAD Officers and conducting yield test by 'V' notch method AS PER TWAD RATE (MISCELLANEOUS S.NO 14.E )

Supply and delivery of following materials

150mm PVC plain asing pipe

150mm PVC slotted casing pipe

160mm PVC end cap

Supply and delivery of 3 core flat type copper cable in 2.50 sq.mm (12.1 S.I.3. IS 694/1990)

50mm dia UPVC pipe

50mm dia GI Bend

50mm dia GI Coupling

50mm dia MS clampset

50mm GI Flange set

50mm dia GI Tee

50mm dia GI Pipe

Bore cap(6")

Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soiL SS20B, including all labour charges etc.(Page no:270/TWAD)

Laying of GI,PVC pipes,specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumping works for proving water supply works in the of 63mm to 90mm OD PVC Pipe(Page no:243/TWAD)

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement after pipe laying and jointing including and all charges(Page no:270/TWAD)

Supply and delivery of following materials

63mm OD PVC pipe 6 KSC

63mm dia PVC End cap

63mm OD PVC Elbow

63mm OD PVC Tee

63mm x20mm PVC saddle piece

20mm GI Pipe

20mm GI Elbow

20mm dia Tap connection

Single tap foundation post and platform

Solvent cement ( Rate /100ml )

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

P.Gowtham