Audi Chair

Executive Leather Chair

Executive Chair

Executive Table Supplying and installation of Audi Chairs with the following specifications:- The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm. Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and a back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx. Back Size shall be: Height: 75:0cm

Width @ top: 34.5cm

Width @ seat level: 46.0cm. The HR polyurethane foam is moulded with density = 45 ±2 kg/m3. The-back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individual armrest between chairs. MS black powder coated (DFT 40- 60 microns ) understructure with integrated

auto tip-up mechanism which folds the seat when not is use. Footprint area of base plate: made of HR steel 15.0 ± 0.2cm X 22.0 ± 0.2cm X 0.5 ± 0.05 cm thick. Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. Understructure shall be fixed to ground by anchors with washer and nut. The auditorium Bid Number ( ) : GEM/2025/B/5999238 Dated : 26-02-2025 Bid Document 1/15

chair shall be designed to get mounted/grouted on floors. Overall Dimensions of Chair shall be Seat Height - 46.5 cm

Height - 101.0 cm

Width & Depth of Chair Width(w1)- 60.0cm(individual)

width(W) - 53.0 cm.(common arm) and Depth-64.0 cm.(normal)

Depth(D2)- 49.0(seat folded). Company should be ISO-9001

AIOTA certified.

Supplying and installation of High Back Chair Seat Assembly with following specifications:- The Cushioned seat inner is made of injection moulded glass filled poly-amide.- HIGH BACK CHAIR: NAPPA LEATHER Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m°

and hardness load 16 ± 2 kgf as per IS 7888 for 25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W).BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded. Plastic Inner. HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustment. Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range).Arm top swivel adjustment- 2 position

12°±2° swivel inside.Arm top width adjustment - Any position (2.0±0.5cm range each arm top) Arm top To - Fro Adjustment- any position (4.0±0.5cm range). Armrest top is made up of high density PU molded over glass filled Poly-amide inner. MECHANISM: The adjustable tilting mechanism is designed with the following features:360° revolving type. Forward tilt of the seat and back. Upright tilt lock. Tilt tension adjustment can be operated in the seating position.3- position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with the help of a Polypropene Seat cover. Seat Depth can be adjusted in the sitting position. The seat depth adjustment range is 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: The Back Assembly is connected to a buff polish die-cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in the sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminum with a buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0±0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining

having a 6.50.1cm wheel Diameter

and assembled to pedestal. Company should be ISO-9001

AIOTA certified. Product should be BIFMA LEVEL 2 and Greenguard (UL) certified.

Supplying and installation of High Back Chair of the following specifications: Overall size of the chair 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³

& hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm

upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having Bid Details 2/15 chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type

front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort

tilt tension adjustment can be operated in seating position

5- position tilt limiter giving option of variable tilt angle to the chair

Seat/back tilt ratio 1:2

The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Company should be ISO-9001

AIOTA certified. Product should be BIFMA LEVEL 2 and Greenguard (UL) certified.

Supplying and installation of meeting table with the following specifications:- The system shall be a desk- based system with a platform understructure made up of a combination of MS. Tubes and plates. The terminating legs can be chosen from the different varieties of inhouse design and manufactured legs. These terminating leg structure shall be in M.S. CRCA sheet/tubes/rods finished with epoxy power coating of the approved colour as per the project designer. The terminating legs can be provided with modesty panels optionally. These modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick CRCA. The legs shall be provided with translucent glide screws to take care of the levelling as per the site requirements. Worktop shall be made of 25MM thick Pre- Laminated Board. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. . Wire management shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Provision for separation of Data and power cable shall be provided in the selected option. Wire riser leg or independent wire risers shall be provided as per the layout structure. All the wire management components shall be of MS sheet with varying thickness as required to support and form a sturdy understructure to carry wires. The overall size of the worktop shall be 1200mm x 600mmD. The overall size of the table shall be 1200W1 x 600D x 750mmH. Company should be ISO-9001

AIOTA certified. Product should be BIFMA LEVEL 2 and Greenguard (UL) certified.

Supplying and installation of main table with following specifications:- Overall size of executive table 1800 x 2100 x 750mm. The main table shall be of size 1800 x 900 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS- 14587:1998 with 0.4mm PVC membrane pressed on to top. Bid Details 3/15 The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Company should be ISO-9001

AIOTA certified. Product should be Greenguard (UL) certified.