Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹38.0 L+₹1.4 L (3.80%)Rejected-AOC 6 1ST CROSS 1ST MAIN OLD POLICE STATION ROAD LAKKASANDRA BANGALORE 560 030 | BENGALURU URBAN | KARNATAKA | 560030 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹39.2 L+₹2.5 L (6.85%)Rejected-AOC NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
PROVN OF CERTAIN SANCTIONED MAJOR REVENUE AND MINOR WORKS AT CHAF BANGALORE
2023_MES_577600_1
8951/GE
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BANGALORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹82,000
17 Mar 2023
27 Jan 2023
1 Mar 2023
27 Jan 2023
25 Feb 2023
10 Feb 2023
28 Jan 2023 - 4 Feb 2023
Amount
Demolition Brick work or stone/ boulder/block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-In-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in cement mortar all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15 cm thickness ( below or above ground level) and removing debris outside MD land as per state government rules complete all as specified and directed by Engineer-In-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed by Engr-in-Charge.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-In-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-In-Charge.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil including brick/ stone masonry/ drain pipes/ small tree roots etc. below ground level complete all as specified and directed by Engr-In-Charge.
M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with hard/dense soils complete all as specified and directed by Engineer-In-Charge.
Spreading and levelling of soil in floors in layers n exc. 25 cm thick well ramming including watering as required (Note: soil obtained from excavation)
M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-In-Charge.
Grubbing up tree trunk girth exc. 100 cm and n. exc 150cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site etc complete all as specified and directed
M & L Broken bricksLoose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc complete all as specified and directed
M&L for hardcore of gauge n.exc 63mm broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-In-Charge.
M&L Plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as foundation filling and mass concrete complete all as specified and directed by Engineer-In-Charge.
M&L cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in concrete in surface channels and drains all as specified.
M&L Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed by Engineer-In-Charge.
M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.
Providing precast cement concrete Type B1 1:2:4 (20mm graded graded graded graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Set in cement mortar 1:4 including necessary form work etc complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, set with CM 1:4, type B1 1:2:4, 10 cm in width and setting in mortar complete all as specified and directed by Engineer-In-Charge.
M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)) for Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for RCC (nominal mix) Type B1 1:2:4 (20mmgraded aggregates), foundations including rafts, footings, foundation beams, plinth beams and mass concrete complete all as specified and directed by Engineer-In-Charge.
M&L for RCC (nominal mix) Type B1 1:2:4 (20mmgraded aggregates)for beams, cantilevers,bressummers, lintels over 1.5 m span complete all as specified and directed by Engineer-In-Charge.
M&L for RCC (nominal mix) Type B1 1:2:4 (20mmgraded aggregates), Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-In-Charge.
Supply only integral water proofing compound complete all as specified and directed by Engineer-In-Charge.
M & L Brickwork, with sub class ‘B’ bricks in one brick thick honey comb work, built in Cement mortar 1:4 complete all as specified and directed by Engineer-In-Charge.
Cutting chases pinning in making good for Stone /concete block or slab walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting n exc 10cm girth complete all as specified and directed.
Cutting chasis, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.
Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.
M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes all as specified and as directed by Engr-in-charge.
M&L for 10mm thick Granite (of any type) tiles machine cut ,in skirting /dado over 15 mm thick backing coat in CM 1:4 on concrete orfair faces of bricksurfaces or stone /block surfaces cement screed and jointes with grey cement slurry ,and pointed with white cement with admixture of pigment to match the shade of granite stone finished even without using exra cement and fair grinding and polishing complete all as specified and as directed by Engr-In-Charge.
M&L for Formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer-In-Charge.
M&L for Formwork to soffits of rough finished surface of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed b Engr-in-charge.
Formwork to sides and soffits of roof beams, beam, lintels, rough finished concrete surfaces complete all as specified and directed by Engineer-In-Charge.
M&L for Formwork to sides of rough finished surface of square concrete columns complete all as specified and directed by Engineer-In-Charge.
S & F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, etc complete all as specified and directed
S & F Flush shutters, with particle board core construction, with block board core and plywood face panels, commercial type on both sides
Taking down steel window/ventilator (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.
Taking down steel window/ventilator (without taking off shutter from the frame) exc. 1.5 sqm but n.exc 5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.
Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block and removing to or from store complete all as specified and directed by Eng-in-Charge
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block and removing to or from store complete all as specified and directed by Eng-in-Charge
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame complete all as specified and directed by Engr-In-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.
S &F Factory made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-In-Charge.
S&F 8mm thick double glaze reinforced with GI powder coated 1.2mm thick metal frame inside the double glaze fixed with Food grade silicon sealent as per manufacturer instructions complete all as specified and as directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engr-In-Charge.
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.
S&F in repair Brass Chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge.
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165.all as specified and as directed.
S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed by Engr-In-Charge.
S & F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long and dia of neck exc 12mm and n. exc 20 mm
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, king ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
ditto all as per item No 56 here in above but 6mm to 8mm dia
ditto all as item No 56 here in above but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders complete all as specified and directed by Engineer-In-Charge.
S& FJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)etc complete all as specified and directed by Engr-In-Charge. Fe 410 -W (Gde- E- 250) quality-
S & F Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed
S & F welded steel wire fabric members n exc 4 kg/ Sq M cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel including necessary scaffoling upto 7 storeyies, fixed all as specified and directed.
S&F Collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in postion and securing runners with holdfasts and brackets complete all as specified and directed. Note : The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts.
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed
S & F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, etc complete all as specified and directed
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. complete all as specified and directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturers catalouge for the corresponding aluminum sections/fittings.
S&F polycarbonate sheet twin wall special quality of M/s Polygon/ Tuflite / Flexituff 6 mm thick and including 'H' connectors for joints and anti dust tape of approved colour (transparent) fabricated to required shape and curves including fixing to mild steel frame work with screws and washers all as specified and as directed.
Supply and fixing for clip in tile made up of 0.5/0.6 mm thick galvanized iron sheet of 120 GSM. The standard size of tile is of 550X550mm which is pressed to clip channel with dimpling on clips on tiles the tile would be powder coated of approved colour The powder coated thickness would be 70-80 micron for indoor applications, the hanging system consist of clips channel, thread rod U mounting clamp, anchor fastner for mounting true ceiling. The quoted unit rate deem to be included the accessories like L/W wall angle made up of 0.40 mm Gl sheet of 120 GSm. The clip channel shall be made out of 0.4 mm GI Sheet which would be hung to the true ceiling by using M6 threaded rod and anchors fastners "M6 hilti make with the help of M6 washers and nuts all as per manufacturer catalouge complete all as specified and as directed. NOTE (The rate inclusive of scaffolding and necessary arrangements).
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-In-Charge.
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations/Plane side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements).all as specified and directed.
Supply and fixing 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.
M&L 18 to 20 mm polished granite slab of approved shade , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including laid over 20 mm thick cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement with pigment to match etc complete all as specified and as directed by Engr-In-Charge.
M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair complete all as specified and directed by Engineer-In-Charge.
M&L 75mm thick Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) as in flooring complete all as specified and directed by Engr-In-Charge.
M&L for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded granite stone aggregate) in floorings complete all as specified and directed by Engr-In-Charge.
M&L for glazed ceramic tiles coloured of size 450X 300X 7mm/ 450x350x7mm thick as vertical surface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm thick rendering in CM 1:4 for laying wall finishes complete all as specified and directed by Engr-In-Charge.
M&L for Non-skid ceramic tiles 7 to 8mm thick (square /Rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM (1:6) complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking coloured paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 50mm thick sand cushion complete all as specified and directed by Engineer-In-Charge.
Dismantling floor, hearth or wall tiling incl cement mortar bedding and backing of any thickness and rubbish off the premisies complete all as specified and as directed by Engr-In-Charge.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L Rendering cement mortar 1:6, 15 mm thick on concrete or fair faces of brick/block surfaces finished even and fair without using extra cement complete all as specified and directed by Engineer-In-Charge.
M & L for rendering 15 mm thick cement plaster 1:4 with and including water proofing compound @ 3% for 5 mm thickness by weight of cement or as per manufacture's instruction on concrete surfaces/ stone masonry/block masonry/ brick , finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-Charge. (Note : WPC will be measured and paid seperately as supply only under relevant item)
Taking down cement or cement lime plaster any description on brick or stone walls, RCC slab ,ceiling etc including raking out joints, hacking for key, scrubbing down with water, etc. all as specified including necessary scaffolding complete all as specified and directed by Engineer-In-Charge.
Preparation of old decorated surfaces of ceiling and applying one coat of White wash complete all as specified and directed by Engr-In-Charge.
Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engr-In-Charge.
M&L for preparing newly plastered surfaces on ceilings and applying three coats of white wash complete all as specified and directed by Engr-In-Charge.
M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls including pillasters, cornices, etc., by washing, rubbing down and stopping and applying one coat of oil bound distemper, including necessary scaffolding upto 7th storey complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and applying 3mm thick wall care putty(birla putty) and applying two coat of Plastic emulsion paint over a base coat of primer including making the surface smooth to recieve the treatment complete all as specified and as directed.
M&L for Preparation of new surfaces of wall and applying 3mm thick wall care putty(birla putty) and applying two coats of Plastic emulsion paint over a base coat of primer etc complete all as specified and as directed.
M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint over a coat of primer all as specified and as directed complete all as specified and directed by Engineer-In-Charge.
S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed
S&F 5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 Sqm in each panel all as specified and as directed.
M & L Preparation of New or previously un- treated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and appling two coats of Synthetic enamel (ordinary tint) over a coat of pink primer etc complete all as specified and directed
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-In-Charge.
S&F GI tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and as directed by Engr-In-Charge.
S&F GI tubing,medium grade,20mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and as directed by Engr-In-Charge.
S&F GI tubing,medium grade,25mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and as directed by Engr-In-Charge.
Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 15mm bore complete all as specified and as directed by Engr-In-Charge.
Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 20 mm bore complete all as specified and as directed by Engr-In-Charge.
Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 25 mm bore complete all as specified and as directed by Engr-In-Charge.
Supply and Laying of CPVC pipes 16 mm dia SDR 11 & plain CPVC SDR 11 fittings, for connection of Inlet/Outlet pipe to geyser complete all as specified and directed.
Supply and Laying of CPVC pipes 20 mm dia SDR 11 & plain CPVC SDR 11 fittings, for connection of Inlet/Outlet pipe to geyser complete all as specified and directed.
S&F trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 500 Ltrs Capacity including dismantling existing 500 Ltr water tanks complete all as specified and as directed.
Supply and fixing of Bib Tap 15 MM dia Cast Copper, Chrome Plated, Screwed down, high pressure with handle for pipes complete all as specified and directed.
S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm borecomplete all as specified and directed by Engr-In-Charge.
S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-In-Charge.
Supply & fixing of Stop valves 15 mm dia, Cast copper alloy, Chrome Plated, Screwed down, high pressure with handle for pipes complete all as specified and directed.
S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.
S&F in repairs 15 mm bore fancy type, chromium plated concealed type Stop valves / Angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-In-Charge.
S&F in repair 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed
S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed
S&F in repair 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed
S&F ball valves, 20mm dia bore high pressure,of PTMT with epoxy coated Aluminium rod& high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.
Dismantling of PVC drain pipes of 75/100/110mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as specified and as directed by Engr-In-Charge.
S&F in repairs PVC connection pipe 450mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed by Engr-In Charge..
S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) bend with access door 110 mm bore complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) bend 110 mm bore complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) 75mm bore vent cowl complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) 110mm bore vent cowl complete all as specified and as directed by Engr-In-Charge.
S&F in repair PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed by Engr-In-Charge.
M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregated as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-In-Charge.
S & F 150 mm internal dia of bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars etc complete all as specified and directed
S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed
S & F in repairs PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe ccomplete all as specified and directed by Engr-In-Charge.
S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete all as specified and directed by Engr-In-Charge.
S&F in repairs Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge.
S & F in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-In-Charge.
S&F in repairs white colour counter type vitreous china wash basin oval type (18 X 13 X 7 inch size) including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete all as specified and directed.
S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete cutting for and pinning in ends of brackets or ereesing stand complete all as specified and directed by Engr-In-Charge.
S&F in repairs urinal Spreader incl fixing with 15mm dia pipe all specified and directed.
Urinal partitions, 8 to 10 mm thick curved shaped urinal partition with frosted glass chrome finish of size of 900mm x 450mm complete all as specified and directed. (Make: Jaquar Cat No.JSE-CHR-110UC450 OR equivalent make in CERA/Parryware)
S&F in repairs sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.
S& F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-In-Charge.
Taking down carefully LED existing ceiling light fittings of any capacity and kept in custody and refixed the same after completion of ceiling work including making good of the disturbed surface complete all as specified and directed.
Supply & fix Flame proof Exhaust fans AC single phase 230/ 240 V of size 380 mm sweep ,1440 RPM, CFM 2350 with louvers complete all as specified as directed.
Supply & fix Exhaust fans AC single phase 230/ 240 V of size 380 mm sweep , 900 RPM, with louvers complete all as specified as directed.
Supply & fixing of Exhaust fans Steel body, AC single phase 230/ 240 V of size 300 mm sweep, with blades, frame & louvers etc complete all as specified and directed.
Supply and fixing of wall mounted fan, 400mm sweep, 100 watts, 2200 RPM including complete acessories,etc complete all as specified and directed. Make : BAJAJ, Model no MIDEA BW 2200 WALL FAN, CAT NO : 60139 or equivalent in HAVELLS /WIPRO/ POLYCAB /CG / PHILPS
Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.
M & L for point wiring with PVC insulated 1.5 sqmm multistranded bunched copper conductor cable , FRLSH , 1100 volt grade drawn in and surface mounted steel conduit stove enamelled , black steel conduit not less than less 19 mm dia with and including flame proof bends and elbows , couplers , bell mouth reducer except junction box all as per relevant IS and type tested / approved by CMRI fixed with solid baked distance saddles and elevated MS spacer plate fixed with nettle fold Gl screws along with 1.5 sqmm PVC insulated solid strand copper conductor FRLSH 1100 Volt grade as ECC connected to common earth dolly, One light point controlled by one rotary switch / MCB
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Casing Caping, ISI marked with all accessories and fixing arrangements laid on Stone walls / brick masonary walls /ceilings / floors etc including fixing top cover /PVC /MS Modular type junction boxes fixing on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed
One Exhaust fan point controlled by one single pole 5 Amps switch
One Switch socket point controlled by one single pole 5 Amps switch
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-
One light controlled by one single pole 5 Amps switch
One Exhaust fan point controlled by one single pole 5 Amps switch
One 3 pin switch socket out let point 5 Amps switch on independent board
One 3 pin switch socket out let point 5 Amps switch on same board
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Casing Caping ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc including fixing top cover /PVC /MS Modular type junction boxes fixing on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed
Supply and fixing of LED Light fitting, 1 X 22 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose.MAKE : CG, MODEL NO : TRIMELINE NEU,CAT NO: CCS-100-40-30-SL-DP-NWH or equivalent make in HAVELLS/ WIPRO/ PHILIPS/ OSRAM
Supply and fixing in repairs LED luminaire 600mmx600mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing of LED 30 WATTS BUILDING SECURITY LIGHTS, Make : CG, Model : ASTRA NEO, CAT NO : LSTS-30 CDL-M or equivalent make in BAJAJ/HAVELLS / WIPRO
Supply and fix Modular switch , 1 Module single pole one way 10 Amps etc complete all as specified and directed.
Supply and fix Modular switch , 1 Module single pole one way 16 Amps etc complete all as specified and directed.
Supply and fix modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined etc complete all as specified and directed.
Supply and fix modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined etc complete all as specified and directed.
Supply and fixing of modular white PVC cover plate with frame, 1 module etc complete all as specified and directed.
Supply and fixing of modular white PVC cover plate with frame, 3 module etc complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 4 module etc complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 6 module etc complete all as specified and directed.
Supply and fixing of modular white cover plate with frame, 8 module etc complete all as specified and directed.
Supply and fixing of Modular PVC flush box 1 module etc complete all as specified and directed.
Supply and fixing of Modular PVC flush box 3 module etc complete all as specified and directed.
Supply and fixing of metal flush box 4 module etc complete all as specified and directed
Supply and fixing of metal flush box 6 module etc complete all as specified and directed
Supply and fixing of metal flush box 8 module etc complete all as specified and directed
Supply and fixing Switch flame proof rotary type with termination box in LM6 , 16A , single pole 250V.all as specified and directed
Supply & fixing of MCB SP, 16 Amps, 240 Volts complete all as specified and directed.
Supply and fixing of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps complete all as specified and directed.
S&F Sheet metal enclosure for DB's double door SPN, 4 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed. Including taking down old unsv from exiting place.
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mmdia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion.
Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire all as specified and as directed.
M & L for sub main wiring with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.
M & L sub main wiring with Two single core PVC insulated cable with copper conductor FRLSH multistranded 1100 volts grade 2x4 sqmm in and including heavy grade steel conduit and its accessories with fixing arrangements on surface , wall , floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed Note : One run of earth continuity conductor , one run of steel conduit and three runs of copper conductor together taken as one length for measuring unit length
Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary including 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.
Material & Labour for making holes on any type of walls (Stone/Brick/Concrete) for fixing of exhaust fans, including making good the disturbed surface with cement mortar 1:4 etc complete all as specified and directed.
Supply and Fixing of Geyser 25 Litres Capacity Suitable for high pressure upto 8 bar, 2 Kilowatts, Powder coated metal body, Temperature indicating dial, fire retardant cable, Efficient long life Copper heating element, Shock proof & Rust proof ABS body, 5 Star rated, including connecting to PVC/ Metal Hot & Cold pipes for inlet & outlet connection from geyser. Complete all as specified and as directed. Make BAJAJ, Model : CALDIA, CODE : 150756 or Equivalent make in HAVELLS/CG/RACOLD
S&F MCB SPN, 32 Amps, 240/415 V, C curve with breaking capacity of 10KA complete all as specified and directed.
MCB SP, 6-32 Amps, 240V, C curve with breaking capacity of 10KA complete all as specified and directed.
Removing demolished material ie building material concrete debris of any type etc to a distance of 30 KM or beyond out of premises of metropolition area including loading, unloading by manually or by mechanical means (JCB and to be transported through trolly or tipper and staking at the destination complete all as specified and directed by Engr-In-Charge during execution.
Sri Vijalakshmi Constructions
M/S Suresh Raju
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .