COMPREHENSIVE MAINT OF FIRE FIGHTING INSTALLATION, FIRE FIGHTING DETECTION SYSTEM AND OTHER CONNECTED WORKS IN AGV AT AFS CHAKERI KANPUR

Amount

Preventive maintenance & repair of Fire alarm system and fire fighting including control panels for detection system by means of their cleaning, checking of circuits including recalibration and testing including replacement of defective parts to make them serviceable all as directed .the Preventive maintenance of following item is also included as mention below. (a) Fire Pump of Capacity 100HP- 01 No (b) Jockey Pump 12.5 HP -01 No (c) Diesel Engine 85.5 KVA -01 No (d) Terrace Pump of Capcity 7.5 HP - 11 No (e) Zone Panel consisting of Zone card and Power Card-11 No (f) Main control panel of 16 zone with 500 W PA system -01 No Note : (a) Panel shall be checked every month as per direction of Engr-in-Charge. (b) Spares shall be measured and paid separately under relavent item of schedule as supply only.(For Sl Item No 3 to 13) (c) If complaint not rectified with in 24 hrs then penality @ 500/per day will be recovered. (d) Monthly checking of fire fighting system should be done every month

Cleaning of internal surafces of Underground sump/ Reservoirs of 1,75,000 gallons capacity height by using high pressure rotary jet machine and pumping out/ flushing out water, mud, sludge, dirt etc by any means of industrial vaccum cleaner including brooming down or steel wire brushing; scrapping down, moulds, moss and efflorescent salts and washing the inside surfaces including pipes, ladders etc. and treating the surfaces by spraying sodium hypochlorite (anti bacterial agent) in a concentration as directed by means of high pressure rotary jet machine & UV radiation disinfactant, disposing off the spoils to a distance not exceeding 50 M in a safe manner where directed by Engineer-in-Charge including S&F Flex Board of size 450mmx300mm duly printed with details e.g Tank Cleaned on:- date, month and year to be mentioned, complete all as specified and indicated.

Supply only Bearing of centrifugal pump 100 HP existing size Make SKF/Tata/NBC

Supply only Bearing of Jockey pump 12.5 HP existing size Make SKF/Tata/NBC

Supply only Bearing of Jockey pump 7.5 HP existing size Make SKF/Tata/NBC

Supply only rubber bush for coupling.

Supply only Gland bush set complete.

Supply only of Mechanical Seal for 100 HP all as per directed by Engr-In-Charge.Make-Kirloskar

Supply only of Mechanical Seal for 7.5 HP all as per directed by Engr-In-Charge.Make-Kirloskar

Supply only Oil filter for Fire DG Set . Make- Mico or equivalent.

Supply only Diesel filter Fire DG Set . Make- Mico or equivalent.

Supply only Coolant for radiator.

Supply only Engine oil as per OEM recommendation as directed

M&L for dismantling and rewinding of motor 7.5 HP cap of same gauge super enemmaled copper winding wire including insulating papper & testing complete all as directed.

M&L for dismantling and rewinding of motor 12 HP cap of same gauge super enemmaled copper winding wire including insulating papper & testing complete all as directed.

M&L for taking down & overhouling of fire hose reel drums by changing of clip ,greasing to swing smothly and refixing the same all as directed .

S&F in replacement fire hose reel drum ISI marked & confirming to relevent IS for 20 mm hose pipe of fire hadder all as directed. Make- GTech/Newage/JMC/Omex/Mini Max or equivalent

M&L for Zubli clip for 20 mm dia hose reel pipe all as directed

M&L for fastner /Nut bolt for fixing the hose reel as per existing size all as directed

M&L for making hanging arrangment made out of FI holding clamp as per existing size dully painted for fire exingusher at each floor of building with suitable nut bolt & washers complete all as directed

M&L for Air release valve for fire hadder near fire pump installed at tarrace of building all as directed.

Supply only power control card suitable for Agni make main fire control panel installed in main fire control room all as directed.

Supply only zone card suitable for Agni make zonal fire control panel installed at each block of building all as specified.

Dismantling and cleaning of smoke cum heat detector from ceiling and refixing the same and testing complete all as directed.

S & F in replacement of detector complying with and type certified to EN-45 addressable type smoke detector photo electric /optical with base with self intelligence as per IS :11360 multisensor with smoke & heat combination confirming to IS with base complete all as directed. Make - APOLO/ System sensor/ Morley

S & F in replacement of gun metal landing valve single headed 80 mm dia, flanged inlet 63 mm dia instant type female outlet complete with gun metal & cap & chain twist release type lug ISI marked & confirming to relevent IS complete all as directed. Make - GTech /Newage or equivalent

S&F in replacement for fire brigade inlet connection 2 way type ISI marked & confirming to relevent IS all as directed. Make- GTech /Newage or equivalent

S &F in replacement of 63 mm dia RRL hose pipe 15 Mtr long with male & female SS couplings bend riveted to hose pipe ISI marked & confirming to relevent IS complete all as directed. Make - GTech /Newage or eqvivalent

S&F in replacement of 20 mm dia rubber hose pipe 30 Mtr long with fixing arrangement ISI marked & confirming to relevent IS complete all as directed. Make - GTech /Newage /Ronak or eqvivalent

S&F in replacement of 20 mm dia gun metal nozzle ISI marked & confirming to relevent IS complete all as directed. Make - GTech/Newage/JMC or equivalent

S&F in replacement of 63 mm brass nozzle ISI marked & confirming to relevent IS complete all as directed. Make - GTech/Newage/JMC or equivalent

S&F in replacement of manual call point with push button fired bride MS box duly painted sealed with glass including necessary electrical connection all as directed. Make - Agni/Alarm/NSD

S&F in replacement of low intensity hooter of 10 watt for warning of fire connected with central control panel installed in each zone all as directed. Make- Agni/Alarm/NSD

S&F in replacement of hose & horn for DCP and CO2 cylinder any size as per site requirement all as directed.

S&F 4 mm thick glass for hose boxes any size as per site requirement all as directed.

M & L for repair of Microprocessor based detection system gas release control panel of 10 zone mounted on wall outside the room made of mild steel sheet confiming to IS 513-1986, minimum 1.6 mm thick . Colour of the panel shall be fire red (shade No 536 of IS 5-1978) with gas release facility including all the wiring , fitting and accessaries and time delay arrangement (with setting for 30-60 sec) for flooding of gas auto and manual mode including battery charger unit with boost & trickle charger, battery box, connections to building automation system and taking down of old panel complete all as specified and directed. :-Make Agani device / Honeywell / ASE

S&F and commissioning of Booster pump for 440V, 3 Phase 50 Hz confirming to IS-12469:1988 with CI casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 V, 3 phase, 50Hz 36m head,450 LPM discharge complete all as specified and directed.

S&F fully automatic star delta starter for Booster pump set capacity 450LPM discharge and 36 Mtr head including connecting all incoming and outgoing copper wire all as directed.

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. all the articles shall be painted with synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S & F in repair fully automatic star delta starter for submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 40.

Supply and fixing fire hose box made of 18 guague MS sheet 800 mm x 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard including the support for hose cabinet shall be of brick work up to a height of 0.5m above ground level. The depth of footing for this support shall be minimum 50cm below ground level, resting on leveling course of minimum 10cm of PCC (1:5:6). The brick work shall be plastered in cement mortar (1:6). complete all as specified and directed. Note : Rate quoted by the contractor deemed to inclusive of support brick work as described above. Make : Newage/ Safex/ Cease fire as approved by GE

Supply, installation, commissioning and testing of open submersible monoblock pump set of capacity 25 HP at 60.00 m head complete all as specified and directed. Make:- KSB/Kirloskar/Crompton Greaves

Supply,and fixing in replacement of Fire extinguisher CO2 type 4.5 kg capacity Cylinder ISI marked IS : 15683 class 13 B type of fire fitted with PVC bend horn complete all as directed.Make Cease fire/Omex/Minimax

S&F in replacement of MS ERW pipe 80 mm bore including cutting and welding , fittings for fire hydrant all as directed. Make- Jindal/Tata

All as per item no 36 but pipe size 150 mm

All as per item no 36 but pipe size 200 mm

Supply & Fix in replacement PVC insulated, sheathed electric cable FRLS 1100V grade two core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in non metallic rigid PVC concealed conduit all as specified and directed.

S&F in replacement of pressure switch confirming to IS all as directed .Make - Agni/Alarm/NSD/Indfos

M&L for painting of steel and iron surfaces such as rising/distribution lines /over head tank lines with two coat of synthetic enemelled paint after preparation of old painted surfaces all as directed.

M&L for pressure gauge 4 " dia (0-14 Kg) rating ISI marked all as directed .Make-Guru/Jackson

M&L for butterfly valve 100 mm dia ISI marked & confirming to relevent IS complete all as directed Make- Leader/Zoloto/Sant

- Ditto- but 150 mm Bore

S&F Non return valve (NRV) in replacement of size 150 mm ISI marked & confirming to relevent IS for fire hadder including nut,bolt & washer complete all as directed. Make - Kirloskar/Upadhyay /Kartar

S&F in replacement of Branch pipe gun metal 63 mm instantaneous inlet,made threaded outlet 15 mm bore nozzle short as specified and directed

S&F in replacement of gun metal landing valve coupling 63 mm dia brass all as specified and directed

S & F in repair MCCB TP, 415V, 200 Amps with breaking capacity 10 KA. Make- L&T/Legrand/Siemens

S & F of Copper conductor PVC sheathed cable stranded 3- core of size 16 Sqmm multistarnd with suitable copper lugs. Make - Havells/Finolex/Paragon

Supply and fixing of Contactor Model No MNX-140 making proper connection with suitble lugs all as per directed by Engr-In-Charge.Make-L&T/Siemens/Legrand

S&F in repair of Single phase preventer all as specified and directed. Make- L&T/Legrand/Minilek

S & F in repair MCB 63 Amps, TPN, 415 volts,'C' Curve AC 10 KA Make- L&T/Legrand/Siemens

S&F in replacement battery 180 AH complete all as specified and directed. Make: Exide/Amaron/Amco/Tata. Note : Old battery shall be deposited to MES store Yard

S&F in replacement automatic battery charger for existing make complete all as specified and directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Excavation in trenches not exceeding 1.0 m wide and not exceeding 1.0 m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling,including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid complete all as specified and directed .

Removing of excavated material not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for providing PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars complete all as specified and directed.

S&F control globe valve/ball valve of size 25 mm ISI marked & confirming to relevent IS for 20 mm dia hose pipe of fire hadder complete all as directed. Make- Leader / Zoloto / Sant as approved by GE

Prime Technology