EEE-III/RZ/NZ/TC/2021-22/20.2

Amount

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.up to 35 sq. mm

Earthing with GI Earth pipe 4.5longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required.

Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

S/D 2x2.5Sq.mm PVC insulated S/C Copper conductor, wire in existing pole PVC conduit as required.

Supplying and erection of galvanized D-iron complete with shackle insulator (75 x 90 mm ) GI bolt and nut coach screws etc as required.

Wiring for sub-main with 2 x 25 Sq. mm single core two wires over head PVC insulated Al. conductor wire with 10 SWG dia G.I. bearer wire by providing cleats at a distance of one meter on existing pole etc. as reqd.

Supply of 4x16 mm2 XLPE insulated and PVC sheathed armoured cable of 1.1KV grade conforming to IS 1554 part-1 as required.

Fabrication, supply & erection of following size flange mounted hot dipgalvanized octagonal pole made from HT steel plate, window with Full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required i/c Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length 6 Amp. SPMCB ‘C’ characteristics earth stud cable support clamp suitable for 4 nos. of 4x25 sqmm cable. Logo/name of Manufacturer shall be embossed on the pole Galvanisation as per relevant IS 5.0 Meter height 3 mm thick bottom dia of 130 mm & top dia of 70 mm base plate of size 225 X 225 X 12 mm thick

Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, rewinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos.and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with positioning of foundation bolts 16 mm dia 600 mm long J type i/c 2 nos template anchor plates of size 225mm X 225mm X 3 mm and providing DWC HDPE pipe for cable entry & exit as required for 5 m pole

Fabrication, supplying & fixing class B Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 1000mm long 32 mm dia galvanized pipe with tightening bolts etc as reqd.

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification as reqd (a) Total system wattage 60 watt +/- 5 % (b)luminaire efficacy >= 100 lumens/watt (c) power factor >=0.95 (d) Protection IP66

Fabrication, supplying and fixing class B galvanised double overhang arm bracket made out of 250 mm long galvanized top tube with cap and 1000 mm long 40 mm dia galvanized pipe with tightening bolts complete as required.

S/F 40mm dia GI pipe medium class along with the pole/wall for cable protection i/c painting etc as required.

SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of size 25mm x 10mm mounted on galvanized M. S. body power quoted pilferage proof SMC door duly welded with S.S. with rain com size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below grand and covered with shode proof SMC sheet of 3 mm as required.

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (a) 100Amp,30KA,FPMCCB

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (b) 250Amp,50KA,FPMCCB

Drilling and laying i/c HDPE pipes of 40 mm outer dia with PN 4 rating by trench less technology confirming to IS 4984

Providing and fixing name board made of MS Sheet 90x60 cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back othe sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30 embedded in CC block 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approval steel primar, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction Engineer-in-Charge

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.

Providing and laying cement concrete in kerbs ,steps and the like at or near ground level excluding the cost of centering ,shuttering and finishing 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)

Supply of 2x 6mm2 XLPE insulated and PVC sheathed unarmoured cable of 1.1KV grade conforming to IS 1554 part-1 as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandcushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

ACE ENGINEERS BUREAU

Kamal Electricals

SRI BALAJI ELECTRICALS