Axle Box Complete Assembly (Middle Axle) for WAP1/WAP4 Loco as per RDSO Drg. No. SKVL-603 Alt-7 or latest and Spec. No. MP.0.3600.01 or latest

1) Supply should be as per tender specification. Firm should quote with documentary proof for conditions, offers submitted without satisfactory proof maybe summarily rejected. 2) For items figuring in the Vendor Directories of CLW/RDSO/DMW/DLW/ICF etc. approved sources only. For other items, Railway reserves the right to procure bulk quantity on proven sources with satisfactory past performance for same or similar items to that extent. Firms should attach tender specific documents in such cases. Firms quoting on behalf on OEM should attach valid authorization letter.

tem is reserved to be procured from BLW approved sources only vide UVAM ID :- 2201266007. Railway reserves the right to place entire or bulk quantity order on BLW approved sources.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Make in India Preference Policy Please refer para 16.0 Part B of Southern Railway tender conditions uploaded in IREPS.

HSN CODE :Tenderers should mention the HSN CODE of the item and Rate of GST applicable. Firm's GST NO. and Firm's Banker details viz., Name & Address of the Bank Account No.., IFSC Code. and MICR No. in their E-Bid.

Tenderers shall confirm the following declaration failing which the offers are likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority.I hereby certify hat this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."

SECURITY DEPOSIT (SD) shall be 5% of total value of contract and shall be taken from all vendors for contract value above Rs.25 Lakhs (payable in the name of FA&CAO/S&W/PER) subject to the applicable exemptions. SD from successful tenderers should be received in Purchase Office within 21 days from the date of communication of acceptance with respect to the purchaser. There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following: a) The Store contract cases of value up to Rs 25 (TwentyFive) lakh, b) Other Railways and Government departments, c) Indian Ordnance Factories, d)PSUs owned by Ministry of Railways and PSUs for the group of items thatare manufactured by them. e) In tenders issued against PAC, OEM in whose favour PAC has been issued shall be exempted from submitting SD. KVIC and ACASH shall be exempted from SD for items supplied by them. f) Vendors registered with Railways for the trade group of the item tendered shall be exempted from SD for orders valued up to their monitory limit of registration. g) Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. h) Vendors registered with Railways for supply of medicine,medical equipment and consumables shall be exempted from submissionof SD for these items. (Please refer Para 10.0 of Part A of SR Tender Conditions. The same is attached along with this tender). Security deposit to be submitted within 21 days of issuance of LOA and valid till 3 months beyond completion of warranty period.

EARNEST MONEY DEPOSIT (EMD) shall be deposited by all vendors for tenders with estimated value above Rs.25 Lakhs subject to the applicable exemptions. The Para 2.1 of the Part A of "SR TENDER CONDITIONS" with regard to EMD exemption is superseded as below and the conditions mentioned here below will prevail over that of in Para 2.1 of the Part A of "SR TENDER CONDITIONS" attached to this tender document: EMD amount shall be mentioned in all tenders irrespective of the nature of tender as per the EMD amount mentioned in clause 2.3 of Part A of "SR TENDER CONDITIONS" or as decided by the purchaser under the policy. There shall be no exemption from submission of EMD for any tender or by any tenderer subject to provisions under clause 10.4.3 of Part A of "SRTENDER CONDITIONS" except following: (i) EMD shall normally not be called against tenders with estimated value up to Rs.25 lakhs (including single tenders, global limited tenders) except cases where competent authority incorporates the condition to call for EMD. ii) Public Sector Undertakings (PSUs) a. PSUs owned by Ministry of Railways and b. PSUs for the group of items that are manufactured by them. iii) MSEs REGISTERED UNDER UDYAM REGISTRATION SHALL BE ELIGIBLE FOR EXEMPTION FROM PAYMENT OF EMD irrespective of relevance of product Category for which they are registered with UDYAM. However, traders/distributors/sole agent/works contract are not exempted from payment of EMD as they are excluded from the purview of the policy. iv) Other Railways, Indian Ordinance factories and Govt. departments. v) In exceptional cases, where EMD exemption is specifically incorporated in tender conditions. vi) Vendors registered with Southern Railway for the trade Group/trade groups of the tendered item . vii) Regular and development vendors appearing on the approved vendor lists of RDSO/PUs/CORE etc., for those specific item for which they are on the approved list, subject to approval status being valid on the date of tender closing. viii) Vendors registered with Railways for supply of medicine, medical equipments and consumables shall be exempted from submission of EMD for these items. ix) In tenders issued against PAC, OEM in whose favour PAC has been issued shall be exempted from submitting EMD. KVIC and ACASH shall be exempted from EMD for items supplied by them. In case of submission of Earnest Money Deposit in the form of Bank Guarantee, please refer Annexure- 6 of "SR TENDER CONDITIONS" forthe Performa for BG.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

1) Door delivery to Consignee along with Delivery Challan (i.e. Postal Address is: To, The Senior Section Engineer (Material Control Cell), Diesel Loco Shed, Chennimalai Road, Erode- 638002). 2). Material has to be strictly supplied within delivery date. Otherwise, Liquidated damage (LD) will be imposed viz. 0.5 percentage per week, upper limit being 10 percentages on delayed supply. 3) If the material is further not supplied within 3 months after the delivery due date mentioned in P.O, then this purchase order will get cancelled without intimation to firm. 4. Along with supply of material, firm has to submit the following documents in original for passing of bill: (a) Delivery Challan. (b) Original Tax Invoice. (c) GST Annexure. (d) GST Declaration. (e) Warranty/Guarantee/Calibration Certificate if specified. . (f) Test Certificate if specified.

Training to vendors on Environment: 1) Eco-friendly Packing such as Gunny Bags/Carton box is better. Avoid Polyethylene bags of thickness < 50micron. 2) Reduce Logistic Vehicle: Usage of Railway Parcel Service is preferable 3) Use of alternate materials like cotton bags/gunny bags(Jute bags) in place of plastic, polythene and wooden packing material shall be followed to the extent possible. It is expected that this would help in reducing the use of polluting materials.

Ambiguous offer will be summarily rejected. Terms of offer must be pecific and unambiguous.