Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER. | |
| 2 | L2₹5.6 L+₹43,135 (8.29%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST TENDERER. | |
| 3 | L3₹6.0 L+₹76,301 (14.7%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST TENDERER. | |
| 4 | L4₹6.4 L+₹1.2 L (23.0%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L4 | Rejected-AOC NOT LOWEST TENDERER. |
Tender Value
₹5.0 L
EMD Value
₹10,000
Closing Date
15 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANDEEP BENIWAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINTENANCE TO NAI BUILDING AT AMBAJHARI NAGPUR
2023_MES_624409_3
8641
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹10,000
7 Mar 2024
16 Jan 2024
22 Feb 2024
16 Jan 2024
15 Feb 2024
23 Jan 2024
Amount
Material and labour for preparing of old decorated surface including filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls with paint roller all as specified and as directed Note : The quoted rate shall deemed to be included rate for removal of vegetation, plants etc if any on the wall surfaces.
All as per item No 1 above but on ceilings
Material and labour for complete removal of existing treatment and prepartion of surfaces including filling the cracks if any on surfaces of wall and applying two coats of oil bound distemper with paint roller complete all as specified and as directed.
All as per item No 3 above but one coat of oil bound distemper.
Material and labour for preparation of old painted surface of steel and iron work of any discription not specifically mentioned otherwise over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified and as directed.
All as item No 05 above but on wooden surface.
Material and labour for applying one coat of cement base paint on wall surfaces including cornices ,pillasters etc including necessary preparation of old plastered wall surfaces complete all as specified and directed.
Material and labour for application of one coat of exterior emulsion paint of white or any colour or equivalent colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints/ Nerolac over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc., after necessary preparation all as specified and as directed.
Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5 sqm each but not exceeding 4 sqm all as specified and as directed.
Supply and fixing IInd class HW plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Supply and fixing mild steel flat iron hold fast including bolts conforming to Fe 410-0 of Fe 310-0 complete all as specified and as directed.
Material and labour providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces all as specified and as directed.
Supply and fixing 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides make as approved by GE.
Supply and fixing 2nd class hardwood glazed and skeleton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into Sqms edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc all as specified and as directed.
Supply and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 160 of SSR Part-II 2010 complete all as specified and as directed.
Supply and fixing of factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification.
Hacking out glass from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.
Supply and fixing sheet glass ordinary quality 3mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.
Supply and fixing butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.
Supply and fixing aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
Supply and fixing floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
Supply and fixing aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
Supply and fixing extruded aluminium alloy handle fabricated type anodised 150 mm long.
Material and labour for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Supply and fixing 300 mm long mild steel ordinary rat rail springs including roller and roller plate complete including taking down old one all as specified and as directed.
Material and labour for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .
Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.
Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.
Supply and fixing aluminium louvered type ventilator with frosted glass and all fittings, closing and opening type all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply and fix framed work such as grills, gratings,gates etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings, framework of water tanks and similar work complete all as specified and as directed.
Supply and fixing door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.
Supply and fixing asbestos Cement sheet 12mm thick for loose (panel) complete all as specified & directed.
Material and labour for granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and mouldidng/rounding the edge complete all as specified and directed.
Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe with waste pipe complete with overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed
Material and labour for providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.
Material and labour for10 mm thick in CM 1:3 screed bed or bedding layer of mortar for laying wall tiles or vertical surfaces (skirting/ dado etc) all as specified and as directed.
Supply and fixing vitrified ceramic tiles 10mm thick (square/rectangular) polished Light shade , area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Material and labour for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
Taking up or down steel tubing and connections 15 mm bore all as specified and as directed.
Supply and fixing 15 mm bore steel water tubing, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.
Supply and fixing in repair bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.
Supply and fixing in repair pillar tap brass CP fancy type 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed.
Supply and fixing in repair towel ring round with round flange all as specified and as directed. Make: Jaquar model No CAN-1121BN or equivalent in Hindware/ Parryware
Supply and fixing in repair vitreous china wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling , brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed
Supply and fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, slim body low level, white, with inlet, ball valve, float and handle including removal of old one all as specified and as directed.
Supply and fixing in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.
Supply and fixing in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.
Supply and fixing in repair of harrison rails, anodised aluminium alloy with fixing brackets,stops, rollers etc.. complete all as specified and directed.
Supply and fixing in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position omplete all as specified and directed.
Supply and fixing in repair brass chromium plate jet spray with 1.5 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) of Make :Jaquar or equivalent as directed.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.
Supply and fixing in repair vitreous china squatting pan "orissa" pattern size 580 x440 mm white with integral foot rests complete all as specified and directed.
Supply and fixing in repair 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair 15 mm dia stop valves, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle,screwed both ends for unions and fixed complete all as specified and directed.
Supply and fixing in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.
Supply and fixing in repair PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply and fixing in repair PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply and fixing in repair PVC (SWR) bends any radius 75mm bore complete all as specified and directed.
Supply and fixing in repair PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
Supply and fixing in repair PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Supply and fixing in repair flush pipe of polythelene of low or high density or PVC, 32 mm dia, for low level cistern all as specified and as directed.
Supply and fixing in repair PVC connection 25 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
Supply and fixing in repair grating dome 100mm dia of PTMT (Minium weight 25gms)
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as specified and as directed.
Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.
Material and labour for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.
Material and labour applying two coats of OBD over a coat of primer on newly plastered wall surfaces including preparation of surfaces complete all as specified and as directed.
Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.
Material and labour for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. all as per manufacturer’s instructions and as directed and Including two coats of oil bound distemper over a coat of putty all as specified and directed.
Material and labour for lnsulated 40mm thick PVC Wall lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall all as specified and directed.
Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed.
E/M Portion
Taking down carefully sub-main wiring of any description and making good to the disturbed surfaces to match the existing all as specified and as directed by EIC.
Material and labour for sub main wiring complete with four single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 5 run of 6 sqmm and one run of PVC conduit shall be measured as single unit
Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.
Material and labour for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping/Casing of suitable size including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of suitable make, switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light/fan point controlled by one switch.
(c) One 3 pin socket outlet 6 amps on same board.
(d) One 3 pin socket outlet 6 amps on independent board.
All as per item No 81 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
Taking down old unserviceable and Supply and fixing new master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 18W (including driver).
Taking down old unserviceable and Supply & Fix new decorative box type fitting with internally pre wired for LED tube energy of 20 watt complete all as specified and as directed.
Taking down old unserviceable and Supply & fixing new surface mounting LED Luminaries 2ft and 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed .
Taking down old unserviceable and Supply & fixing 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.
Taking down old unserviceable and Supply & fixing switch modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator, all as specified and as directed.
Taking down old unserviceable and supply & fixing socket modular type single pole one way 6 Amps 240 volts suitable for existing modular switch boxes all as specified and as directed.
Taking down old unserviceable and Supply & fixing for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.
Taking down old unserviceable and supply & fixing socket modular type 16 Amps, 3 pin combine, 2 module, 240 volts suitable for existing modular switch boxes all as specified and as directed.
Taking down old unserviceable and Supply & fixing switch modular type 16 Amps, one way with indicator, 1 module, 240 volts suitable for existing modular switch boxes all as specified and as directed.
Taking down old unserviceable and Supply & fixing sheet metal enclosures for TPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.
Taking down old unserviceable and Supply & fixing MCB TPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified and as directed.
Taking down old unserviceable and Supply & fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed.
Taking out unserviceable temp sensor and supply and fixing new temperature sensor with cold assembly 230 v AC suitbale for split type ac of 1.5/2 Ton capacity of any make model complete all as directed.
Taking out defective capacitor and supply and fix running capacitir suitable for 1.5/2 ton 230 v split ac 36/40/45/50/55/60 mfd complete all as directed.
Taking down unserviceable fan motor blade assembly & supply and fixing new fan motor blade assembly for split type AC 1.5/2 Ton capacity of any make/ model complete all as directed.
Taking down unserviceable PVC drain pipe & supply and fix with new PVC drain pipe with clamps set of size 20 mm dia up to 2 mtrs complete all as directed.
Taking down unserviceable brass suction/ discharge valve & supply & fixing new brass suction/discharge valve of suitable size for 1.5/2 ton split type AC of any make / model complete all as directed.
Taking down unserviceable brass flare nut supply and fix new brass flare nut of suitable size for 1.5/2 ton split type AC of any make /model complete all as speci directed.
Taking down unserviceable sheet metal enclusure with earth plug socket & suply and fix sheet metal enclosure with single pole and neutral with two pin and earth plug and socket complete with one single pole mcb of 20 amp
Dismantling of defective compressor sealed unit from the existing AC's foundation by removing suction/ discharge line and providing of new compressor sealed unit of same size and quality from the manufacturers of ACs or of make authorised by the manufacturers of AC's, rotary type and checking (company re-oriented), system with nitrogen gas pressure, testing for leakages and vaccumisation of complete system with gas recharging with R-134a/R -22/R-32/R-410a gas as required and oil testing suitable for 1.5 Ton split AC capacity including testing complete Note :- The rate is inclusive of refrigerant gas.
Taking down of unserviceable PCB (Printed circuit board) and providing new PCB for AC of 1.5 / 2.0 Ton capacity of split AC.
Dismantling old and providing new copper tubes of size 1/4 inch for suction line including rubber tube insulations of same size for fixing AC complete all as specified and directed.
Dismantling old and providing new copper tubes of size 5/8 inch for suction line including rubber tube insulations of same size for fixing AC complete all as specified and directed.
Material and labour for checking of gas leakage and supply and charging of gas, including vacummising, cutting, brazing after filling again and checking of gas leakage after gas charging for the split AC 1.5/2 Ton Make of gas : R-134 a/R-22/R-32/R-410a Note : . Contractor shall be ensure that gas charging to be measured as Job and if there is any leakage during the contract period then the same will be filled by the contractor without claiming any extra cost. (ii) Tools and plants, gas cylinder shall not be issued by MES.
Supply and charging Refrigerant gas (R-22/ R -134a/410A/R-32) suitable for Split AC.
Supply & fixing PVC insulated 1100v grade of size 2.5 sqmm, 3 core PVC round sheathed insulated flexible FR copper cable complete all as specified and directed.
Supply and fill in holes of POP (Plaster of paris) alabaster plaster (450 Gms ) very high strength, fast setting, dries fast, snow white colour, creamy consistency, compressive strength after 1 hrs : 150kg/cm2 complete all as specified and directed.
Material and labour for disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, wall fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed by EIC. Note: (i) Rewinding work and replacement of spares shall be measured and paid separately under appropriate items. (Ii) No supporting materials, tools and plants shall be issued by MES to contractor.
Material and labour for rewinding to ceiling/ wall fan motor assembly complete with super enameled copper winding wire of suitable gauge for any make and any size of fan including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete.
Supply and fixing replace ball bearing 6201/ 6202/ 6203 for 48 " (1200 mm ) sweep fan including taking down old unserviceable ball bearing complete all as specefied . Make : TATA/ SKF/ NBC
Supply and fixing capacitor 2.5 MFD, 240 Volts, including taking down old unserviceable all as specified and as directed. Make : EPCOS/ Havells/ Philips,
Material and labour for rewinding to exhaust fan motor assembly complete with super enamelled copper winding wire of suitable gauge including varnishing, drying up, providing fresh clean lubricant oil/ grease, reassembling and tesing etc for size upto 12" (305 mm) sweep complete all as specified and as directed.
M/s ABHIMAN HEGDE
VIJ ASSOCIATES
M/s Prakash R. Verma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .