Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.0 L
EMD Value
₹38,046
Closing Date
6 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Bangalore Complex Aerospace Division
Drilling of Bore wells Two nos at Aerospace Division HAL BC
9352
HAL/ASD/NIT-293A/24-25
Works
Bangalore Complex - Aerospace Division
₹0
₹38,046
6 Sept 2024
22 Aug 2024
22 Aug 2024
6 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Cost of tender document (DD no, Date, amount)
Earnest Money Deposit (Number, Date, Amount)
Registered Contractor
Not Enclosed
Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should be at least 30% of the approx. estimated amount put to tender]
TURN OVER IN Rs.
Enclosed
Enclosed
Enclosed
ESI & PF Nos with proof
Related Document to be Uploaded to eProcurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Electrical license
Experience of having successfully completed similar works during last 7 years ending last day of July-2024. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
HAL/ASD/NIT-293A/24-25 HAL/ASD/CB-293A/24-25
Drilling of Bore wells (Two nos) at Aerospace Division HAL(BC)
Specification
Geophysical investigation by vertical electrical sounding by adopting venner or schlumberger's method or any other scientific or approved method including reconnaissance survey of geological formation, geophysical investigation of existing ground water in the vicinity, its quantity & acceptability of the users indicating the location of site recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth 1m in consolidation formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifier proposed to be tapped, probable yield and other information required including transportation of insrtument and accessories to work site engaging technical personal and labour required, etc., complete as directed by Engineer-in-Charge.
Drilling of 160 / 165 mm dia borewell upto required depth with necessary drilling plants, and equipments (drilling rings, Compressor, etc.,) including site clearance if required, drilling through various underground strata necessary underground blasting of rock, tests for quantity including transportation of plant equipment, men and materials, etc., all complete as per Engineer-in-charge. [Note: The Agency shall take required permissions of concerned Government Bodies (if required) and official fee will be paid by HAL]
Depth upto (0 to 250 feet)
Depth exceeding from 251 feet to 350 feet
Depth exceeding from 351 feet to 450 feet
Depth exceeding from 451 feet to 500 feet
Depth exceeding from 501 feet to 600 feet
Depth exceeding from 601 feet to 750 feet
Depth exceeding from 751 feet to 900 feet
Depth exceeding from 901 feet to 1000 feet
Supplying, jointing and fixing to required depth 175 to 180mm dia 2.5mm thick MS casing pipes and MS Collar heavy grade of approved quality including threading, jointing to collars, inserting to required depth, etc., all complete as directed by Engineer-in-Charge. [MS casing pipe and collars are contractor's own supply and exposed portion will be painted with approved anticorrosive paint]
Supplying, jointing, fixing and laying to required depth 140mm dia UPVC casing pipes of heavy duty, Class II of ISI/approved make including jointing to collars, inserting to required depth, etc., all complete as directed by Engineer-in-Charge.
Supplying, jointing and fixing to required depth UPVC slotted / filter pipe [borewell pipe] 140mm dia and class II of ISI / approved quality, threading and jointing to collars with chemical solution, inserting to required depth with necessary fittings and fixtures, etc., all complete as per site conditions and as directed by Engineer-in-Charge.
Supplying, Jointing and fixing in position to depth 750 to 1000 feet UPVC submersible column pipe conforming to IS and to withstand a pressure of 16KGF/SQ cms, of approved quality brand and manufacture, threading and joining with SS Nipple, clamp, installing upto requird depth etc., all complete as approved, specified and directed by Engineer-in-chare. [ SS Nipple, SS clamp contractors own supply]
Supplying & installation, Testing & Commissioning of submersible pumpsets as detailed below, of Texmo-Aquatex / CRI / Kirloskar / Crompton make type 60HH 1016, upto 32 stage suiting to site conditions, 3PH, 415V, 50Hz, 2880 RPM, 50mm outlet, A.C. supply 16 stage, lowering along with pipe line as per directions inclusive of cost of all materials, labour, tools and plants, taxes, conveyances etc., all complete as approved, specified and directed by Engineer-in-charge.
Providing, laying and fixing 4 sq.mm 3 core copper conductor - PVC insulated flat cable without joint to suit to site, of approved brand and manufacture (FINOLEX/equivalent) for the submersible pump sets inclusive cost of all materials, labour, T & P, taxes, conveyances etc., all complete as approved, specified and directed by Engineer-in-charge.
Providing and fixing M.S. clamps made up to M.S flats (50 x 10) mm - 2 nos with necessary bolts, nuts and washers and 165/170mm dia MS bore well cap inclusive of cost of all materials, labour, tools & plant over and with one coat of yellow based zinc chromate primer preparation of surface etc., complete all as per approved design and as directed by the Engineer-in-Charge.
Supplying, Fixing and commissioning Havells or other HAL approved make 32A TPN switch fuse in stainless steel enclosure operating voltage 415V, 3 phase fixed on angle frame work etc., all complete as directed and as per the instrutions of the Engineer-in-charge
Supplying, Fixing and commissioning Havells or other HAL approved make 32A Miniature Circuit Breaker [MCB] in stainless steel enclosure operating voltage 415V, 3 phase etc., all complete as directed and as per the instrutions of the Engineer-in-charge. [HAVELL's / INDO KOPP OR APPROVED make]
Supplying and Jointing medium grade 50mm dia G.I Pipes with screwed ends includig all necessary heavy quality G.I fittings such as bends, tees, elbows, coupling, reducers, unions, check nuts, plugs etc. jointing with teflon tapes, clamping, etc. painting with one coat of zinc chromate primer and two coats of first quality synthetic enamel paint of approved colour etc. all complete etc., all complete as directed and as per the instructions of the Engineer-in-charge.
Providing, installation fixing and wiring outdoor panel board with Volt meter, Ammeter, L & T starter, DOL contactor, over load relay, single phase preventor, Dry run preventor, pilot lamps., Re-wirable fuse carrier including complete internal wiring housed in a SS box with MS legs painted with anticorrosive paint. Provision of the required space for fixing 3 phase electrical energy meter with a seable locking door and Acrylic window including providing & fixing 3 nos. fuse cut outs with porcelain base and termination of service mains cables etc., Providing and fixing fuse cut outs 3 nos. and 6mm thick Hylam sheet for fixing electrical energy meter as per specifications. The entire until shall be fixed in concrete pedestal with necessary foundation bolts inclusive cost of all materials, labour, tools and plants, taxes, conveyances etc., all complete as directed by Engineer-in-charge.
Supplying and fixing 50 mm dia Gun metal high pressure heavy duty Non Return valve of NETA make or approved make conforming to IS 14846 (Class I) fixed to GI pipe with all required GI specials etc., all complete as directed and as per the instructions of the Engineer-in-charge.
Supplying and fixing 150mm dia MS Borewell Clamp and cap with adjustable nuts, bolts, etc., all complete as directed by the Engineer-in-Charge
The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.
Payment will be subject to terms and conditions in the tender document
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TenderNoticeNIT293A.pdf
TENDER_DOCUMENT • 0.10 MB
PQNIT293AVendorToviewonly.pdf
TENDER_DOCUMENT • 0.02 MB
PQNIT293AVendorToUpload.xlsm
TENDER_DOCUMENT • 0.02 MB
TenderdocumentNIT293A.pdf
TENDER_DOCUMENT • 0.54 MB
AnnexuresforNIT293A.pdf
TENDER_DOCUMENT • 0.12 MB
PricebidNIT293AVENDORTOviewonly.pdf
TENDER_DOCUMENT • 0.08 MB
PricebidNIT293AVENDORTOUPLOAD.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .