Supply of material in AC-01

Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min(Minimum)

Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCTshall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).18-22 Watt

Supplying of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD< 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirementdeg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).100 Watt

Supply of 63 A rating , 2 pole RCCB 30 mA

Supply of 63 A rating , 4 pole RCCB 30 mA

Supply of 3 pole MCCB, 125A, 16KA

Supply of 3 pole MCCB, 250A, 35KA

Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 10 sq. mm ISI marked, FRLS PVC insulated,single core copper conductor cable

Supply of S.P. 5/6 amps, one way switch, piano type ISI marked

Supply of S.P. 15/16 amps, one way switch, piano type ISI marked

Supply of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Supply of 3 mm thick phenolic laminated sheet

Supply of 32 amps. ratings , SP MCB, “C” curve,10 KA breaking capacity

Supply of 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required.

Rewinding of AC ceiling fan of all sizes and make including oiling, greasing as required New Model (Light Weight)

Supply of 9/10 Watt LED Lamp suitable for B22 holder

Replacement of fan condenser 2.5 mfd as required.

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1 kV grade conforming to IS-7098 of 2 core 16 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1 kV grade conforming to IS-7098 of 4 core 25 sqmm