PROVN OF STORAGE SHED FOR 374 COMP ARTY BDE, PROVN OF TOILET BLOCK AT MAIN GATE OF 150 FD REGT AND EXECUTION OF CERTAIN MINOR WORKS AT NASIRABAD MIL STATION

Amount

Excavation in trenched n exc 1.50 m in width and n exc 1.50m in depth for foundation , manholes , cesspits, laying cables cables, pipes etc n exc 10 sqm on plan and getting out in any type of soil complete all as specified and directed

Excavation in trenched n exc 1.50 m in width and exc 1.50m but n exc 3 m in depth for foundation, manholes , cesspits, laying cables, pipes etc n exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for brick work with old size fly ash bricks, staright or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with old size fly ash bricks staright or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in damp proof course on horizontal surface using water proofing compound including necessary formwork. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

Earth filling under floor including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

Removel of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above from the starting point complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC M-25 grade (Design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge

M & L for M-25 grade (Design Mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC M-25 (Design Mix) using 20mm graded aggregates as in roof beams, lintel beams/bands, cantilevers, bressummers, lintels over 1.5m span, chajjas etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to sides and soffits of floor or roof beams, soffits of lintel beams/ bands, chajjas, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams etc., flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC M-25 (Design mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for 15mm thick rendering on brick /concrete work surfaces in CM 1:4 mixed with WPC as per manufactuere instructions, finished even and smooth without using extra cement (WPC shall be measured and paid separately)

M&L for 10mm thick redering on brick work surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for 5 mm thick rendering on brick work or concrete surface in cement mortar (1:3) as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified & directed.

M&L for preparation of new plaster surfaces and applying three coats of lime/ white wash on ceiling complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls & applying three coat of white wash complete as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete, all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, complete, all as specified and directed.

S&F PVC valve less syphonic action type, low level flushing cistern, 10 Ltrs capacity, white with inlet ball valve, float and handle & flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size, complete, all as specified and directed.

S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

S&F stop cock/angle cock 15 mm dia chromium plated fancy type screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete, all as specified and directed.

S&F Soap dish fixed to plugs with chromium plated brass screws embedded in the wall complete, all as specified and directed.

S&F vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed.

S&F vitreous china urinal, half stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified & directed.

S&F Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe (min weight - 100 gms) complete all as specified and directed.

S&F tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed.

S & F brass chromium plated swivel shower rose 125mm size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as directed.

M&L for non skid ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the tiles over and including 15mm thick screed bed in CM 1:6 over and including 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate ) complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x450x7 to 8mm thick on vertical surfaces of wall such as skirting/ dados etc., set and jonted in neat cement slurry and pointed in white cement with pigment to match the shade the tiles over and including 10mm thick plaster backing on stone/brick masonry walls in CM 1:4 complete all as specified and directed.

S & F Steel ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements, 25mm aluminium knobs to shutter, aluminium hook & eye, 10mm MS square bars in grill, 04 Nos lugs welded to frame Z section handle 100mm inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note :Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F sheet glass , ordinary quality 3mm thick fixed with oil putty size of glass n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F for aluminium anodised handle 150mm long fabricated type complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled ISI marked of size 100mm complete all as specified and directed.

M&L for preparing the steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

Supply only integral water proofing compound (ISI marked).

S&F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per description of srl item 55.00 above but 20 mm bore pipe.

All as per description of srl item 55.00 above but 25 mm bore pipe.

S&F ball valves PTMT with high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore (min weight 210 gms) complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps made of FI 50x3mm and 16mm round MS bar, complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 110mm bore PVC (SWR) vent cowl, complete all as specified

M&L for 40 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank over and including 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm stone crushed agg.) finished concrete base, surfaces even & smooth complete all as specified and directed

M & L for 20mm thick black granite on platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M & L for 75 mm thick PCC 1:3:6 type C-2, using 40 mm graded stone agg as in sub base etc complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.

M&L for 150mm dia in bore SGSW drain pipes laid in trenches and jointed complete all as specified.

M & L for PCC 1:2:4 type B2 using 40 mm graded aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all specified and directed

M & L for 50 mm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all specified and directed

S&F CI soil and waste pipe 100mm bore waste or vent pipe in any length with or without ears, with cement joints on vertical surfaces of wall complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement even complete all as spescified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using belown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

M&L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

Surface excavation over areas n.exc 30 cm deep and average 15 cm deep , in any type soil complete all as specified and directed.

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds and joints as spd for random rubble walling uncoursed or brought upto courses with depression on face from straight edge held against the dressedsurface n exc 20mm complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil, complte all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate in foundations , filling and mass concrete.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete, all as specified & directed.

Supply only glass dividing stirrups 3mm thick, 38 mm width inserted in position confirm to design.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S&F for steel work in tubular including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 completed all as spd and directed.

S&F M S plate or angle, channel, square cut or notched with riveted, bolted or welded attachment Fe-410 garde E-250 completed all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based courrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw fixed with L & J hooks and washer in roof wall etc with grade of zink coating 275 completed all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel shet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw completed all as specified and directed.

M&L for MS bolts 12 mm dia machine made with hexagonal or squared heads at one end and screwed and to be fitted with washers and one hexaonal or squared but n exc 5 cm long complete all as spd and directed.

M&L 15mm thick rendering on stone masonary wall in CM 1:6 finished even and smooth (without using extra cement) complete all specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 (ISI marked), drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

One light point/bell point controlled by one, one way switch.

All as per item No. 93.00 here-in-before but with 2.5 Sqmm wire, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F sub main wiring with two runs of PVC insulated and sheathed multistranded (FRLS) copper conductor cable of size 4 Sqmm Sqmm, 2 core, 1100 volts grade, drawn through and including PVC Casing & Caping (ISI marked) fixed on roof/ceiling/wall all as per site requirement with all fittings like clamps screws, socket, bend etc as per IS including earth continuity conductor of size 2.5 Sqmm single core copper conductor multistranded cable connected to common earth dolly, complete, all as directed. Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC Casing N Caping -AKG/Plaza/Kalinga

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F switch piano flush type 15 Amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by engr-in-Charge . MAKE:-Havells/Anchor/Legrand

S&F LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Havells Cat part No PHOTONULTRA2.01212T8SSTL20WLED 865SPC (for tube) REGALBATTENT8UPTO1X22WDSBSWH (for batten)/ Bajaj Cat Part No BLRB 18W CWc for tube & BLRB - DB 118 for batten or equivalent model from Philips/Crompton

S&F LED mirror light fittiong 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories prewired and including connecting flexible copper conductor cable with suitable size. Make: Havells/Bajaj/Crompton.

S&F lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F LED lamp 10 watt suitable for 230 volts , 50 Hzs, B-22 base complete all as specified and directed

S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge Make Bajaj/Havells/CG

Supply, fixing testing and commissioning energy saving street light luminaire 35 watt LED , aluminium pressure die cast housing with tughened glass cover with individual LED lence , IP 66 protection complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model from Surya/Control& Switchgear/Bajaj

S & F GI bracket made out of GI pipe light grade of size 32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 04 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens. Note: MCB DB and MCB SP/SPN will be of same make.

S & F MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F MCB SP, 240 volt, 3 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. . Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S&F exhaust fan, steel body, AC single phase, 230 Volt of size 300mm sweep with blades and frame and louvers. Make: Havells/Bajaj/Crompton

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with life hook made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00mm from top of earth plate up to 7.5 meter above ground level.

Supply , laying and testing 1100 volt grade heavy duty cable XLPE insulated , armoured cable with stranded aluminium conductor of size 10 Sq mm 2 core including taking down old unsv cable complete all as specified and diected . Make: Havells/Polycab/Asian/Gloster/Finolex

S&F 40 mm GI tubing light grade with all fittings as required for passing cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including nut, bolt and washer.

All as per description of serial item no. 115.00 above but GI tubing of 50mm bore.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

M & L for old size sub class 'B’ bricks s as in cable cover, laid flat adjoining to each other width wise for protection of cables in trenches, complete, all as specified & directed.

S&F 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe.

M&L for cutting existing GI tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fitting (ie union, nipple, reducing tee) for branch connection of internal dia 25/20mm dia including excavation & earth work in any type of soil complete all as directed.

Supply, installation, testing and commissioning of water heater storage type Geyser of 25 litre capacity BEE star rated for single phase 50 Hz AC supply, stainless steel inner assembly with suitable KW heating element twin thermostat for water temperature and safety thermostat stove enamelled outer body including minimum 1 metre 3 core 2.5 Sqmm twisted copper conductor cable PVC sheathed and three pin plug top complete, all as directed by Engr-In-Charge. Make: Havells Model - Adonia Spin Cat Part No. GHWCASTWH025 or V-Guard, Model : Pebble Metallica.

S&F PVC flexible pipe connection suitable size with PTMT nuts of length 450mm and PVC washers on both ends complete for cold water/hot water inlet/outlet line, complete, all as directed.

Supply only street light Engineering plastic one piece moulding control box with locking arrangment made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar or terminal two nos (2P-R/Y/B and N) of rating 63 amps for single phase and neutral on porcelain based insulators. Make : Sintex/ Hensel/ SHI/BRITE

Supply ,erecting and fixing the true vertical position,steel tubular swaged pole(410 SP-31),09 mtr long, complete with cast iron base plate,pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole ,including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed.(Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed. Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

Supply and fixing LED street light luminaries 70/72 Watt having shall be made of single piece Aluminium Die cast with powder coated in RAL-7032 shade with heat distribution fins onhousing with UV stabilized toughned flass cover and should have secondary lens on each LED for better light distribution .The system luminaire efficacy should be > 110 LM/W with high power LED of Philips/Osram/Cree/Nichia Make.LED driver should be potted and BIS certified with efficiency > 85 % frequency 50 HZ,Operating voltage range 120V-270V,current not more than 0.320 Amp,PF 0.95, THD (I) < 10 %, supported with 5 KV internal and 10 KV external SPD, Humidity 10% to 90 % RH, working temperature - 20⁰ C to 50⁰ C lige expectancy of LED should be 50000 burning houres with minimum 70 % initial lumene maintained, CRI >70 Make:- Cat Part No LSTP-72-CDL-M OF Crompton or equivalent Make in Havells/Halonix/Phillips LED

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, complete all as specified & directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 2.5 sqmm 3 core for pole box to street light fitting complete all as specified and directed.

M & L for carrying out boring under the black top road for crossing of LT cable/protection pipe by any means without damaging black top surface of road for fixing of GI pipe upto 80mm bore under the road complete all as specified and directed.

Supply, installation testing and commissioning of solar water heating system suitable for inlet water with chlorine and fluoride content up to 100 PPM and comprising of Solar flate plate collector , collector stand assembly, stainless steel insulated hot water storage tank with heat exchanger of 100 Litres per day capacity with electrical back up with collector "A" size aluminium box collector and comprising of following.

Insulated stainless steel hot water storage tank non pressure type made out of stainless steel grade4 04 Cr 18 NI of IS 1570 (Part-3) -1985 , TIG welded of 100 Liters capacity , non magnetic tank with stainless steel fittings with following specification -01 Nos

Tank shall be insulated with 40 mm thermal grade PU insulation with FRP cladding , Tank stand assembly made of angle of size +/- 10% OF 38x38x4mm duly pretreated and stove enameled with black colour paint complete

Provision of electrical back up with minimum 4 KW heating element including providing one No 32 Amps MCB 10 KA rupturing capacity with Metal clad box and top complete

The Solar water heating system shall be provided on Platform on ground made out of PCC and 45 cm in height as per manufacturer direction

Heat exchanger shall be cage type and make of stainless steel tube of grade 04 Cr 18 NI of 07 18 NI of IS 1570 (Par-5) -1885

All other pipe / civil work , connection work for PVC tank, as per OEM recommendation electrical work , outlet and inlet thermometer, Air release valve , check valves , gate valves controls and instruments etc all as required shall be deemed to be included in Unit rate quoted . System internal piping shall be ISI marked GI pipe medium class of IS:1239 duly insulated with 50 mm thick rock wool of 48 Kg / cum density and 26 SWG Aluminium cladding

Notes :-1. The system shall be tested on completeion to ensure that 100 Ltrs (as specified) of water at 60 degree centigrade is available in hot water tank on a normal day in cold season. Makes :- The complete solar water heating system shall be one of the following makes : BHEL, TATA-BP SOLAR Systems, Best and crompton (Chennai), Novel Energy (P) Ltd (Newdelhi) , Solar equipments Manufacturing CO . (Noida), SOLCHROME SYSTEMS INDIA LTD (PARWANOO-HIMACHAL) , Surya jyoti devices India Ltd (ROPAR-Punjab) or equivalent make as per appx 'B' approved by GE

M& L for fabrication work of joist , channel, angle or tee sections, flat iron fixed independently, without connecting plates etc complete Fe-410 W (Gde E-250 ) quality B complete for mounting of PVC tank of 500 Ltrs capacity for Solar water heater at staging complete all as specified and directed

M & L for carryout necessary glass wool insulation comprising of 100 mm outer dia (compressed) glass wool on 20 mm bore GI tubing with 26 gauge aluminium sheet over chicken mesh complete all as specified and directed by Engineer-in-charge

Supply & fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for of 20mm bore GI tubing all as directed by Engineer-in-Charge.

Supply & fix bib taps, cast copper alloy, with crutch or butterfly handle, screwed down , screwed for iron pipes or for brass ferrule and fixed of 20mm bore GI tubing all as directed by Engineer-in-Charge.

Supply & fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for of 25mm bore GI tubing all as directed by Engineer-in-Charge.

Cutting Existing steel tubing for alterations or additions in 25 mm bore pipe complete all as specified and directed

Supply & installation Evaporative Desert cooler electric driven suitable for single phase, 230 volts, AC 50 Hz supply having minimum air flow capacity 4000 Cum per hour complete with fan, motor and pump (or nearest size ).steel body etc. Make of Fan Motor: Crompton/Khaitan/Bajaj and Make of water pump - Khaitan/Indo Summer Cool/Texmo

M & L for 40X40X6 mm equal angle iron stand, removable, design as approved by Engr-in-Charge including cutting and welding etc for desert coolers duly painted with one under coat one finish coat of aluminium paint over a coat of red oxide primer all as directed.

M & L for point wiring of 1.5 sqmm single core multi stranded copper conductor PVC insulated, sheathed, flame retardent, cable 1100 volts grade in PVC caping & casing ISI marked fixed on roof/cielling/wall all as per site requirement with all fixing arrangement like screw, tee, socket,bend etcas per IS including sunk type steel terminal boxes and PVC laminated top sheet covers 3 mm thick complete with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cableconnected to common earth dolly complete.

One 5 Amps socket outlet on independent board.

Supply, installation, testing and commissioning of split unit air conditioner, electric driven single phase of capacity 1.5 TR. Minimum 3 star rated. Make : Voltas 1.5 Ton 3 Star 183V CZJ, 3 star, Inverter type Split AC or equivalent from Samsung

Supply & installation Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with stabilized output voltage 230 volt with accuracy + 2.5% and speed of correction 8 volt per second of capacity 4 KVA. Make: Microtech/ V-Guard/Whirlpool/Luminious.

S&F Sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug with socket complete with one single pole 20 Amp MCB, complete all as specified and directed.

Supply and fix water cooler fully stainless steel, electric driven , single phase, having storage capacity 80 Ltr and nominal cooling capacity of 40 Ltr/hr, with stainless steel tank complete all as specified and directed. Make- Voltas, Model- WS FS 40/80 NP R134a or equivalent model of Blue Star, Usha

S&F on wall/roofs/ceiling GI tubing "medium grade" 15 mm bore including necessary screwing and all fittings (Tee ,union, nipple, reducer, elbow etc) as required at site complete as specified and directed by Engr-in-Charge. Make : TATA/JINDAL/Swastik/Prakash surya

Supply and fixing stop valve chromium plated , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe 15 mm dia complete as specified and directed by Engr-in-Charge.

Shree Sai Ram Enterprises

kirtiman traders

M/S AL ASMA ENTERPRISES

H M LAXMINARAIN

RISHU RISHANT CONSTRUCTION

M/s SUNIL ENTERPRISES