GE 874/EWS-10/2023-24

Amount

BR and EM Portion

Demolition of cement conc (Un - reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level).

Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work.

M & L second class soft wood (kail) in scantling clean swan complete all as specified.

Taking down chowkat with shutters exc. 1.5 Sqm but n.exc. 4 Sqm (without taking off shutters from the frame)

Taking down chowkat with shutters n. exc. 1.5Sqm (without taking off shutters from the frame)

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.

S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhats.

Dismantling of boarding of any description fitted in any position with nails.

20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed by Engr-in-Charge

Dismantling wall and ceiling board (fiber, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness,including cover fillets.

M & L plywood, 6mm thick grade, BWR type BB fixed with nails to timber frame work in ceiling.

M & L Plain fillets of exc. 3 & n.exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.

Two coat of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth.

M&L for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long.

All as per item above but 150mm long.

M&L for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long.

M & L for MS butt hinges med. Weight, cold rolled 100mm long.

All as per item above but 75mm long.

M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long.

All as per item above but 125mm long.

Taking down cement plaster on brick or stone walls etc including raking out jonits hacking for key scrubbing down with water etc.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc. 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile or 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).

M&L Glazed ceramic coloured tiles (300x200x7mm) thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in CM 1:4 all as specified.

M&L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even aned fair without using extra cement all as specified.

Demolition of brick work or stone masonry, built in cement mortar incl all quins arches, pillers, etc but excluding ashlar facing , dressed stonework and precast concrete.

M&L Bricks work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6.

All as per item above but except brick.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement motar 1:6 finished even and smooth (without using extra cement).

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:4 finished even and smooth (without using extra cement).

MS hold fast conforming to Fe 410-0 or Fe-310-0 suitable for fixing to stone/ Concrete door or window frames.

Two coats of colour wash over One coats of white wash on newly plastered surfaces on wall including preparation.

M&L for 10 ltrs capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets & PVC flush pipe 32mm bore, in repairs.

S&F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, in repairs .

S&F 15 mm Pillar taps ,cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank and flynuts screwed for iron pipes and fixed in repairs

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

M&L 20mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.)

M&L 15mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.)

S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe,in repair.

S&F Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair.

S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank .

S&F ball valves, high pressure,with polythene float and flynut complete ,20mm bore ,in repair

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends ,in repair

S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs.

All as per item above but 20mm bore pipe.

S&F 110mm PVC(SWR) P trap fixed in repairs.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Dismantling 100mm dia PVC pipes in any position.

M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 100mm bore pipe all as specified.

S&F 110mm PVC(SWR) bends.

M&L for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified.

S&F 75mm PVC(SWR) bends.

S&F PVC (SWR) floor trap dia of outlet 75mm with grating including jointing with solvent cement, fixed in repairs.

Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering .

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

Solid PVC door frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life).

M & L for Plain Cement concrete type C 2 1:3:6 150 mm thick as in floor as specified.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & including P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl of fixing supply pipe to flushing cistern, trap and waste pipe.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms).

S & F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms).

S & F in repair Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms).

S & F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).

S & F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws.

S & F in repair PVC connections 15mm size with PTMT nuts of length 900 mm.

S & F in repair for vitreous china premium EWC one piece patteren icluding all neccessary accessories complete all as approved bt Engr-In-Charge and as specified.

S & F in repair Health faucet (ABS Body) mild steel Chromium plated suitable for 15 mm dia pipe with 1.25 m long tube as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/loose soil all as directed.

M&L plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate all as specified.

M & L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted stone masonry, built in cemet mortar 1:4 all as specified.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

M&L MS TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone agg as in beams, cantilevers, bressummers, lintel over 1.5mtr span complete all as specified and directed by engr in charge.

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for 10mm thick CM 1 : 6 as in internal Plastering to fair face of brick masonry walls and finished even & smooth.

Mild Steel stractural steel work as in Roof trussed (framed) purlins crane guntries rail & fastening and heavy bracket (beam tea angle channel or flat section of Fe 410 -W (GdeE- 250) quality A including distance pieces cleats etc all as specified.

M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified.

M & L two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified.

M & L two coats of white wash, on internal wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified.

M&L Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering.

M&L Hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.

M&L for 75mm thick PCC 1:4:8 type D2 (40 mm graded crushed stone agg) as in sub base of floor.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed.

M&L 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint color PVC sheet reinforced with MS square tube, and fitted in opening all as specified.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete omplete with glazing bars, dove tailed or welded including one shop coat of zinc chromites primer complete all as specified and directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 15mm dia

M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified

Soap dish, vitreous China white, approximate size 160x 160x90mm.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.

S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB , sink etc.

M&L for PVC (SWR) WC connector with lip ring 110mm.

M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.

S&F Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out soft/lose soil all as specified and directed.

M &L Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) 40mm thick as in floor and fished even and smooth without using extra cement all specified and directed.

Glass dividing strips, 3 mm thick and 38mm wide in the construction joints all as specified and directed.

Mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down MCB DBs complete with MCB's/ isolator etc removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and as directed.

Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.

All as per item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per item above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.

Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj.

Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.

S&F in replacement of decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells product code LUMILINEPLUSBS20WLED865SPCSS or equivalent of approved make as approved by Engr-in-Charge.

Supply and fixing LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips.

S&F Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips.

S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips.

S&F Switch socket combination 2-in-1 5 pin 6 Amps (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.

S&F Switch socket combination 5 in 1, 5 and 15 Amp universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips.

S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.

S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Havells/Legrand/Philips

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and neutral 40 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Havells/Legrand/Philips.

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m. Make : Havells/ Bajaj/USHA.

S&F house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cable flat or circular of size 16sqmm, two core including taking down old services cable and removing from the site complete all as specified and as directed. Make : Havells, Plaza, Gloster, Polycab.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cable flat or circular of size 10sqmm, two core including taking down old services cable and removing from the site complete all as specified and as directed. Make : Havells, Plaza, Gloster, Polycab.

GH MOHD SHAH AND CO

Bidder Name

GH MOHD SHAH AND CO

M/S MANZOORAHMAD LONE