Construction of Staff Quarters No. 1 for Eklavya Model residential School Nichar, District Kinnaur HP SH- C.O Building portion including water supply and sanitary installation, RWHS, Septic tank and Site development.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. . All kinds of soil. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form work complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Edges of slabs and breaks in floors and walls Under 20 cm wide

Cornices and mouldings

walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size (fouty millimeter)) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. (Reinforcement cement concrete) work including straightening, cutting, bending, placing in position and binding complete including cost of binding wire Complete plinth level upto floor all level complete, Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying damp-proof course 50mm (Fifty millimeter)) thick with cement concrete 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20mm (twenty millimeter) nominal size). complete upto flooor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (one point seven kilogram) per square meter on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five millimeter), joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimeter) or 35x 5 mm (thirty five inti five millimeter) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S. channels Frames for doors, windows, frames manufactured from ISMC 75mmx40mm (seventy five into forty millimeter) with M.S. flat 75mm x 4mm (seventy five into four millimeter) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required threshold i/c threshold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (Two point five millimeter) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled shutters for doors having 12mm (twelve millimeter) thick phenol bonded both side pre laminated particle board ISI marked IS No. 12823 of approved shade infill panel of Action tessa / century / Kitlam including M.S. pressed butt hinges bright finished of required size with necessary screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals .The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made ISI marked 15x3 mm (fifteen into three millimeter) lugs 10 cm (Ten centimeter) long embedded in cement concrete block 15x10x10 cm (fifteen into ten into ten centimeter) of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitered and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing fly proof Stainless steel (grade 304) wire gauze of 0.5 mm (Zero point five millimeter) dia wire and 1.4 mm (one point four millimeter) aperture on both sides windows, clerestory windows & doors with M.S. Flat 15x3 mm (Fifteen into three millimeter) and nuts & bolts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing 5 mm (Five millimeter) thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing 4 mm (Four millimeter) thick frosted glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Fixed to steel windows by welding

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Fixed to steel windows by welding

Providing and fixing 50 mm (fifty millimeter) thick precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 6mm nominal size) , reinforced with 1.6 mm (One point six millimeter) dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (Twenty into ten into two millimeter) and braced with flat iron diagonals 20x5 mm (Twenty into five millimeter) size, with top and bottom rail of T-iron 40x40x6 mm (Forty into forty into six), with 40 mm (forty millimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing the complete box of cupboard shall be made of 19mm (Twenty millimeter) thick water proof ply board BWP grade shutter with Had wood edging of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves. Back side of board shall have 6 to 8 mm (Six to eight millimeter) thick water proof ply all the cut portion of board shall have 6 mm (Six millimeter) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimeter) thick water proof Ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers, knob magnetic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royalty , malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 65 mm (Sixty five millimeter) special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick water proof commercial board in shelves/box for cupboard with butt joints & fixing with nails & screws etc complete) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (Ninty millimeter) thick water proof Ply board BWP grade shutter of century ply /Kitply /Marino (ISI marked) with 6 mm thick hard wood edging all round and PGI sheet linning inside for FF / SDB i/c fixing with nickel plated piano hinges with screws etc. Complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 25 mm dia (Twenty five millimeter) curtain rods of 1.25 mm (One point twenty five) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 300x16 mm ( Three hundred into sixteen millimeter) bright /matt finished Stainless Steel sliding door bolt of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

250x10mm size

150x10mm size

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm size

100mm size

Providing and fixing 250 mm (Two hundred fifty millimeter) bright finished brass hard drawn hooks and eyes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm (seven hundred millimeter), with necessary accessories and screws etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Twin rubber stopper

Kota stone slab flooring over 25 mm (twenty five millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mirror polished 25 mm (twenty five millimeter) thick single slab Kota stone in risers of steps single piece of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mirror polished 19 mm (nineteen millimeter) thick Kota stone minimum Size 55X55cm (fifty five into fifty five centimeter) of uniform colour in flooring of approved shade as per detail slab flooring over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone slabs 20 mm (twenty millimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 400x400 mm (four hundred into four hundred millimeter) Antiskid Cermic Tiles of Kajaria / Nitco / Orient & Bell in flooring laid over 20 mm (twenty millimeter) thick Cement mortar 1 : 4 (1 cement : 4 coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300 mm (three hundred into three hundred millimeter) thick vitrified floor tiles with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 18 mm thick (eighteen millimeter) (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble) gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 40 mm (forty millimeter) thick fine dressed stone flooring over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Providing and fixing 50 mm dia molded pipe handrail of 14 to 16 gauge / 75mm x 40mm hollow rectangular section fixed on square baluster 19x19 mm / 20x20mm M.S. Solid Square bars with M.S. flat 20x6mm with 3 nos @ 16 MM mid rail connected at the side of the baluster with fixtures T and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approved drawing , design and specifications as per approved drawing , design and specifications. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Providing and fixing 50mm dia M.S. Pipe handrail slip resistant with round ends at two level i e 75cm and 90cm height. It should extend 30cm beyond the top and bottom of the ramp welded with 25mm diameter M.S hollow pipe balusters embedded in cement concrete 60cm C/C and jointing with electrical gas welding at top alongwith hand rail of hollow M.S. pipe of 50mm diameter as per approved drawing , design and specifications.. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66mm to 20mm (One point sixty six to twenty millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing flashing 38 cm (Thirty eight centimeter) overall with 0.60 mm thick pre painted sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with pre painted iron J or L hooks, bolts and nuts 6mm dia meter & pre painted G.I. limpet & bitumen washers complete as per approved drawing , design and specifications. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals .The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15cm wide 45cm overall semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 0.63mm thick GI sheet

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement is four sand) and mixed with Pidi proof LW at the rate 200ml (two hundred millimeter) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towards drain water pipe while the second coat of Dr. Fixit is still tacky, complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimeter) diameter on wall face un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face un plasticized - PVC molded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Bend 87.5° 150mm (One hundred fifty millimeter) Plain bend

Shoe (Plain) 150mm (One hundred fifty millimeter) shoe

Providing and fixing 150 mm (One hundred fifty millimeter) unplasticised -PVC pipe clips of approved design to un plasticized PVC rain water pipes by means of 50x50x50 mm (Fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600x6mm (Six hundred into six hundred into six millimeter) Everest board or its equivalent ceiling cacade in powder coated GI channel framing @ 600mm centre to centre complete as per approved drawing , design and specifications. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm ( six millimeter )Thick plaster on cement concrete or reinforced cement concrete work with a cement mortar 1:3(one cement : three fine sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

15 mm ( fifteen millimeter) cement plaster on rough side of single or half brick wall of mix 1:5 ( one cement : five Fine sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

15mm thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:6 (1 cement: 6 sand) upto floor two level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimeter) cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.. New work (Two or more coats applied @ 3.84 kg/10 sqm ( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in new work (two or more coats) over and including water thinable priming coat with cement primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting with synthetic enamel paint two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture of required colour to give an even shade : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) upto plinth level with : cement mortar 1:6 (one cement :six coarse sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing Plinth protection with 60 mm thick interlocking paver blocks of NTC with 23 cm dia. Half round pipe for drainage purpose fixed over cement concrete 1:5:10 bedding of pipe as per Architectural drawing ,design and specifications. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 2nd class Deodar wood work in frames of false ceiling, partitions etc. sawn and fixed in position :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12 mm (Twelve millimeter) thick. 1st class deodar wood for wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimeter) thick HDF flooring of Armstrong CC laminated (Ambience Crystal AC-4) or its equivalent laid over RCC / CC slab to be paid for separately complete as per direction of Enineer-In-Charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50x12 mm (Fifty into twelve millimeter) 2nd class teak wood wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

PN - 16 Pipe, 20mm (Twenty millimeter) OD (SDR-7.4)

PN - 16 Pipe, 25mm (Twenty five millimeter) OD (SDR-7.4)

Making connection of G.I. distribution 25 to 40 mm (Twenty five to forty millimeter) nominal bore branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ) high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero zero to four point six millimeter) of Finolex/Vectus/Reliance including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing P.V.C. Supreme/ Kisan/ Astral heal rest Confirming to IS no-14735-99 including filling the joints with approved adhesive. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing PVC collars including fixing with approved adhesive etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing P.V.C cowl ISI marked including finishing with approved design with steel screws and rawal plugs etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm (One hundred ten millimeter) nominal bore/diameters

75mm (Seventy five millimeter) nominal bore/diameters

Providing and fixing 110 x 90 mm (One hundred ten into ninety millimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm X 75 mm.(One hundred ten into seventy five millimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (Five hundred eighty into four hundred fouty millimeter) with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals .The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 510x1040 mm (Five hundred ten into one thousand fouty millimeter) bowl depth 250 mm (Two hundred fifty millimeter) Kitchen sink with drain board Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimeter) dia C.P. brass chain and rubber plug complete for sink or wash basin: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimeter) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste for wash basin or sink complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing two hole basin mixing Faucet including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millimeter) sand cast Iron grating for gully trap. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (Seventy five millimeter) sand cast Iron grating for gully trap. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimeter) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm (Six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing 600mmx20mm (Six hundred into twenty millimeter) size C.P Brass towel rail complete with C.P Brass brackets fixed to wooden lugs with C.P brass screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimeter) dia C.P. / S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P. brass Pillar tap cock (concealed) of standard design and of approved make conforming to IS:8931.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of (Heavy duty makes ISI marked) IS No. 8931 & 8934 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimeter) nominal bore plasticized PVC connection pipe with brass unions 30 cm length including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimeter) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Semi rigid pipe

Providing and fixing P.V.C single equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm (One hundred fifty millimeter) dia

110mm (One hundred ten millimeter) dia

Providing and fixing P.V.C double equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm (One hundred fifty millimeter) dia

110mm (One hundred ten millimeter) dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (Three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm (One hundred fifty millimeter) dia

110mm (One hundred ten millimeter) dia

Providing and fixing PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm (One hundred fifty millimeter) dia

110mm (One hundred ten millimeter) dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 100 mm (One hundred millimeter) diameter in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round PVC pipes including bed concrete as per standard design as per entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 150 mm (One hundred fifty millimeter) diameter S.W. pipe in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design as per entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Tooth brush and Tumbler holder (Vitreous China) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimeter) and 45 cm forty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten) internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm (forty millimeter) nominal size), inside plastering 12 mm (Twelve millimeter) thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (Twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (One hundred twenty into ninety centimeter) and 90 cm (ninety centimeter) deep including C.I. cover with frame (medium duty) 500 mm (Five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) with Sewer bricks conforming to IS : 4885 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millimeter) dia and 45 cm (fouty five centimeter) deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five), total weight of cover with frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three Kilogram) and weight of frame 15 kg (fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm (Fouty millimeter) nominal size), inside plastering 12 mm (Twelve millimeter) thick with cement mortar 1:3 (1cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc Pipes, cables etc. exceeding 80 mm (Eighty millimeter) dia. but not exceeding 300 mm (Three hundred millimeter) dia including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, (One point five meter) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m (Fifty meter) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government. All kinds of soil

Providing and laying 20 mm (Twenty millimeter) nominal bore in trenches, galvanized mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 15 mm (Fifteen millimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth in Cement Mortar 1:4 ( 1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 40 mm (Forty millimeter) thick with 20 mm (Twenty millimeter) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20mm (twenty millimeter) Cement plaster in two coats, backing coat 10 mm (Ten millimeter). And finishing coat 10mm (ten millimeter). Thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arises, internal rounded angles chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 (one cement:four sand). complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying and fixing 455x610 mm (Four hundred fifty five into six hundred ten millimeter) rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg C.I. cover without frame for manholes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm dia (One hundred ten millimeter) high pressure PVC spigot and socket waste and ventilating pipe ISI marked including fixing with approved adhesive etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm dia. (One hundred ten millimeter) PVC Cowl for waste and ventilating pipes ISI marked including fixing with approved adhesive etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00 HP (one horse power) water lifting pump ISI marked of Kirloskar / Crompton including accessories and making necessary connection as required at site for its functioning complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. All works above plinth level upto floor V level (Note :- Cement content considered in this item is kg/cum.“Excess/ less cement used as per design mix is payable/recoverable @ 360 separately). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (Four hundred fouty five into six hundred ten millimeter) (light duty) single seal pattern having weight not less than 23 kg. as per HPPWD specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing M.S. foot rests with 20x20 mm (Twenty into twenty millimeter) square bar including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimeter) cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia (hundred millimeter) AC pipe extending through the full width of the structures with slope of 1(V):20(H) (One vertical: twenty horizontal) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royalty , malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Please Enable Macros to View BoQ information