Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.1 LAccepted-AOC PLOT NO 10 9 OM VIHAR PHASE 1 A UTTAM NAGAR NEW DELHI 110059 | WEST DELHI | DELHI | 110059 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹20.0 L+₹17,343.40 (0.88%)Rejected-Finance GROUND FLOOR F 11 PHASE II MAYAPURI WEST DELHI DELHI 110064 | DELHI | WEST DELHI | DELHI | 110064 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹20.3 L+₹50,484.30 (2.55%)Rejected-Finance ROOM NO 145 MASJID WALI GALLI GANESH MURTI NAGAR PART NO 2 COLABA MUMBAI 05 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹22.2 L+₹2.4 L (12.1%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹23.8 L+₹4.0 L (20.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | B.R. Enterprises L5 | ALLIED CONSTRUCTION L4 | M P TYAGI ENGINEERS AND CONTRACTORS L6 | Lamba Enterprises L1 | CHOUDHARY ELECTRICAL L3 | AMIT ENTERPRISES L2 | sumit associates L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting electric connections from LT control panel and starter of submersible pump set of size 2 to 15 HP and removing the pipe line connections from discharge side and taking down/out submersible pump set along with column pipe from bore well with the help of chain pully block including transportation to workshop for repairs and back and lowering of same pump in bore well after repairs after replacement of rusted nuts, bolts, washers, rubber gasket etc including testing complete all as specified and as directed b Engineer-in-Charge. | 12 | EACH JOB | 5,500 ₹66,000 | 500 ₹6,000 | 99 ₹1,188 Lowest | 3,000 ₹36,000 | 4,000 ₹48,000 | 6,000 ₹72,000 | 7,000 ₹84,000 |
| 2.00 | Disconnecting electrical connections from panel board including disconnecting the cable leads from the motor terminal box and taking down/out electric motor of any capacity and makes from base plate of pump set after opening the nuts, bolts etc / Dismantling the induction/Submersible motor and seperate the stator and rotor and removing the Unserviceable DE & NDE sede bearing, burnt winding wire from stator and rewinding the same as per existing supper enamelled copper wire gauge F class insulation used including varnishing and heating for drying of winding, transporting the motor to workshop for repair and back, re-installed after repair including testing complete all as specified and directed . | 250 | KG | 749 ₹1,87,250 | 680 ₹1,70,000 | 19 ₹4,750 Lowest | 700 ₹1,75,000 | 700 ₹1,75,000 | 480 ₹1,20,000 | 20 ₹5,000 |
| 3.00 | Disconnecting electric connection and De-coupling the Centrifugal pump of capacity 5 to 12.5 HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e. CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, mechanical seal, gasket packing including grinding work of lathe machine if any and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. | 4 | EACH JOB | 2,200 ₹8,800 | 1,800 ₹7,200 | 999 ₹3,996 Lowest | 3,500 ₹14,000 | 1,000 ₹4,000 | 12,000 ₹48,000 | 4,500 ₹18,000 |
| 4.00 | Disconnecting of electric connection and De-coupling the Centrifugal pump of capacity 20 to 25 HP and removimg from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope gasket packing including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed | 2 | EACH JOB | 3,200 ₹6,400 | 1,800 ₹3,600 | 999 ₹1,998 | 5,000 ₹10,000 | 2,500 ₹5,000 | 13,000 ₹26,000 | 500 ₹1,000 Lowest |
| 5.00 | Disconnecting of electric connection and De-coupling the Centrifugal pump of capacity 30 HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope or Mechanical seal as applicable on site, gasket packing including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. | 2 | EACH JOB | 3,500 ₹7,000 | 2,500 ₹5,000 | 999 ₹1,998 Lowest | 4,000 ₹8,000 | 3,000 ₹6,000 | 14,000 ₹28,000 | 4,500 ₹9,000 |
| 6.00 | Disconnecting of electric connection and De-coupling the Centrifugal pump of capacity 40HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope or Mechanical seal as applicable on site, gasket packing including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. | 4 | EACH JOB | 4,000 ₹16,000 | 2,500 ₹10,000 | 999 ₹3,996 Lowest | 5,500 ₹22,000 | 3,000 ₹12,000 | 15,000 ₹60,000 | 4,500 ₹18,000 |
| 7.00 | Disconnecting of electric connection and De-coupling the Centrifugal pump of capacity 75 HP to 105 HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope or Mechanical seal as applicable on site, gasket packing including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. | 2 | EACH JOB | 7,000 ₹14,000 | 3,500 ₹7,000 | 1,999 ₹3,998 Lowest | 7,000 ₹14,000 | 3,000 ₹6,000 | 16,000 ₹32,000 | 4,500 ₹9,000 |
| 8.00 | Disconnecting the electric connection of monoblock pump of capacity 7.5 to10 HP and removing the same from foundationfor repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Impeller, GM shaft sleeve, Mechanical seal, water seal, water liquid reflector, MS stud with nut, gasket packing including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. | 2 | EACH JOB | 2,500 ₹5,000 | 1,500 ₹3,000 Lowest | 2,999 ₹5,998 | 2,500 ₹5,000 | 1,800 ₹3,600 | 4,000 ₹8,000 | 4,500 ₹9,000 |
| 9.00 | Dismantling complete submersible pump of capacity 5-7.5 HP and repairing the same with replacing the following unserviceable spare parts i.e GM bush, rotor sleeve, water seal,cable seal, thrust bearing, sealing ring, upper & lower housing flange upper & lower with stud and nut, wire mesh, drain plug, SS distance sleeve, impeller key, inter ring GM neck ring, Guide bush, GM impeller/EPV Impeller, CI section chamber,SS coupling, CI stage bowl, T bolt with nut including grinding work of lathe machine and re-assembling the same testing, complete all as specified and directed | 4 | EACH JOB | 5,500 ₹22,000 | 1,500 ₹6,000 | 999 ₹3,996 Lowest | 4,000 ₹16,000 | 1,500 ₹6,000 | 3,500 ₹14,000 | 4,500 ₹18,000 |
| 10.00 | Dismantling complete submersible pump of capacity 10-12.5 HP and repairing the same with replacing the following unserviceable spare parts i.e GM bush, rotor sleeve, water seal,cable seal, thrust bearing, sealing ring, upper & lower housing flange upper & lower with stud and nut, wire mesh, drain plug, SS distance sleeve, impeller key, inter ring GM neck ring, Guide bush, GM impeller/EPV Impeller, CI section chamber,SS coupling, CI stage bowl, T bolt with nut including grinding work of lathe machine and re-assembling the same testing, complete all as specified and directed | 6 | EACH JOB | 6,500 ₹39,000 | 2,000 ₹12,000 | 999 ₹5,994 Lowest | 4,500 ₹27,000 | 1,200 ₹7,200 | 3,500 ₹21,000 | 3,500 ₹21,000 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
4 Oct 2025, 6:00 pmClosed
GE(U)(W/S) DELHI CANTT
GE(U)(W/S) DELHI CANTT 110010
REPAIR/MAINTENANCE OF SUBMERSIBLE, MONOBLOCK AND CENTRIFUGAL PUMP SETS AND ELECTIC CONTROL PANELS INCLUDING DEVELOPMENT OF BOREWELLS AND CONNECTED ITEMS OF WATER SUPPLY INSTALLATIONS OF NODAL POINT -II , TODAPUR/61 CAVALARY, NARAINA PUMP HOUSE, 505 A
2025_MES_730720_1
GE/WS/Token No-37 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
GE(U)(W/S) DELHI CANTT
AS PER NIT AND TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE(U)(W/S) DELHI CANTT
₹64,000
9 Dec 2025
13 Sept 2025
6 Oct 2025
13 Sept 2025
4 Oct 2025
28 Sept 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .