REPAIR/MAINT TO DRAINAGE, COMPOUND WALL, CHAIN LINK FENCING, HARDSTANDING, DRAIN COVER SLABS AND CERTAIN B/R MISC WORKS OF UNRESTRICTED AREA OF COD UNDER AGE B/R-II OF GE (E) JABALPUR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in Cement Mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.Complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in Cement Mortar 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coats of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

Demolition of Cement Concrete (un-reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement Concrete 1:4:8, Type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 80mm thickness, M-40 Grade with grey cement & no pigment complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering & consolidation complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge n.exc 63mm, deposited, spread & levelled in layers n.exc 15cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for coloured rubber moulded chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over & including 20mm thick screed bed or bedding layer of Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Heavy Duty Vitrified Ceramic tiles 10mm thick (Square/Rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over & including 15mm thick screed bed or bedding layer of Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Cement Concrete 1:2:4, Type B-1 using 20mm graded stone aggregate as in path/hard standing surface finished even and fair complete all as specified and directed.

M&L for forming construction joint 90mm deep x 10mm wide filled with grade 'A' sealing compound complete all as specified and directed.

Excavation in trenches in soft/loose soil, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 qm on plan & getting out complete all as specified and directed.

M&L for Moorum/Red Bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled & rammed including watering complete all as specified and directed.

M&L for Cement Concrete 1:2:4, Type B-1 using 20mm graded stone aggregate as in surface channels & drains complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or Deduct for each 25mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for providing Cement Concrete 1:2:4, Type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of Cement Concrete (re-inforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Providing Precast Cement Concrete Type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc. & setting in Cement Mortar 1:6 including necessary formwork if required complete all as specified and directed.

S&F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

M&L for Removing surplus excavated material (soil) to a distance n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition & breaking up of 300mm Internal dia, drain pipes (Salt glazed ware, AC or Re-inforced Concrete) set in cement mortar complete all as specified and directed.

Demolition & breaking up of 450mm Internal dia, drain pipes (Salt glazed ware, AC or Re-inforced Concrete) set in cement mortar complete all as specified and directed.

M&L for Reinforced Cement Concrete Pipes, Class NP3, 300mm bore laid & jointed complete with collars complete all as specified and directed.

M&L for Reinforced Cement Concrete Pipes, Class NP3, 450mm bore laid & jointed complete with collars complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6, Type C-2 using 40mm graded stone aggregate to 300mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6, Type C-2 using 40mm graded stone aggregate to 450mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling posts or sturts (wood, steel or R.C.C.) any section embedded in concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering & removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

M&L for Cement Concrete 1:3:6, Type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

S&F of Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed.

S&F of Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n.exc 10cm long, diameter of neck 11 to 15mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint & apply two coats of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described & applying two coats of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repair, Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies, 35 mm thick (measured solid), Type B-0, 1:2:4 using 12.5 mm graded stone aggregate including all mouldings but excluding frame, set in Cement Mortar 1:6 including necessary formwork if required complete all as specified and directed.

S&F of Mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repair, Steel Concertina Coil of super profile of 600mm dia stress in position hot dipped Galvanised steel wire coated with CLR anti corrosive paint making diamond shape with the help of dove tail clip (18 SWG) the coil fixed with razor wire at points were coil touch the bottom layer wire with help of hog rings (14 SWG) with and including all fittings like fastener, clips, luggs rings etc as approved by Engr-in Charge complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS15658 - 2006 of 60mm thickness, M-35 Grade with grey cement & no pigment complete all as specified and directed.

M&L for Form Work to faces of walls, retaining walls, abutments, parapets & staircase railings & similar work including attached pillasters, buttresses, etc, vertical or to batter, fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Re-inforced Cement Concrete 1:1:5:3,Type A-1 using 20mm graded stone aggregates in walls, retaining walls, basement walls, ballast walls & the like; any thickness; above top of footings; including attached pillasters & buttresses complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:1:5:3, Type A-1 using 20 mm graded stone aggregates in Foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles & mass concrete complete all as specified and directed.

Schedule of credit amount of Rs. 2,86,697.50 to be deducted during AOC.

M/S BHATIA CONSTRUCTIONS (BID ID -3080326)

M/S N K SONKAR (BID ID -3073646)

M/S A.P.M. CONSTRUCTION CO. (BID ID -3076766)

M/S Chandrakant Sonkar (BID ID -3073643)

m/s R K SETHI (BID ID -3082194)

RAMRAJA CONSTRUCTION COMPANY (BID ID -3070568)