PROVN OF PARKING SHED NEAR REGIMENTAL SHOP AND SPECIAL REPAIR TO BLDG NO P-128 AND P-90 AT AF STN

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ Loose soil complete all as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc. and getting out in soft/ loose soil complete all as directed.

M&L for plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in sub base, foundation, filling and mass concrete complete all as directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soil complete all as directed.

Removing excavated soils not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point.

M&L rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.

M&L 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M&L for preparing newly plastered surfaces of walls by brooming down and applying two coats of Acrylic weather proof exterior emulsion paint over one coat of acrylic primer and one coat of cement base exterior putty on plastered surfaces of walls etc. complete, all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over acoat of wall care putty complete all as specified.

Excavation in post holes each not exc. 0.50 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre in soft/loose soil complete all as specified.

M&L cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

S&F steel work in tubular trusses/purlin/post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St-240 complete all as directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted bolted or welded attachement complete all as directed.

M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L Kota stone slab 20 to 25mm thick in floor laid over & including 15mm thick screed bed in CM (1:6) & jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete all as directed.

M&L kota stone slab 20-25mm thick in skirting or in vertical surface laid over & including 10mm thick rendering in CM (1:4) & joint in grey cement with pigment to match the shade of slab including rubbing & polishing complete all as directed.

M&L for machine pressed precast interlocking paver block (rubber moulding) any shape and size conforming to IS- 15658-2006 of 80mm thickness, M-40 Grade , with grey cement and pigment, laid over and including 50mm thick river sand cushioning complete all as specified and directed. Note:- Quoted rate for this items includes for 50 mm thick river sand filling.

M&L for sand filling under floors or in foundations including watering and consolidation

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as directed. Note:- Provn of 10 mm thick toughend glass is including in the items.

M&L for cement concrete type B-1, (1:2:4) using 20 mm graded stone aggregate including use and waste of form work as in coping ,kerbs and similar articles including weathering ,slightly rounded or chamfered angles with plain faces complete all as specified and directed.

M&L mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

Ditto all as item no 26 above but 8mm dia as in stirrups and binders.

Demolition of cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.

M&L 40mm thick Cement concrete type B-0,1:2:4(12.5mm graded stone aggregate) as in padding of roof including finishing the surface even and smooth using extra cement mixed with waterproofing compound complete all as specified and directed.(WPC shall be measured & paid separately)

Supply only Integral waterproofing compound

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling.

Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in ceiling/facia/ chajja using waterproofing compound complete all as specified.(WPC shall be measured & paid separately)

M&L complete removal of existing treatment including preparation of surfaces and applying two coats of Acrylic weather proof exterior emulsion paint over one coat of acrylic primer and one coat of cement base exterior putty on plastered surfaces of walls etc. complete, all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for preparation of old plastered surfaces of ceiling & applying one coat of white wash complete all as specified.

M & L for preparation of old plastered surfaces of wall & applying one coat of distemper oil emulsion complete all as specified.

M&L preparetion of existing steel / iron surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for 4mm Non Asbestos fiber Cement building board of size (595x595 )mm fixed in powder coated Anodised aluminium frame (snapgrid) of standard section (a) aluminium wall angle 40mmx25mmx2mm, (b) aluminium main tee 36.5x25mmx1.40mm, (c) aluminium cross tee 23.5mm x 26.4mmx 1.40mm, (d) aluminium bracket at cross junction 25mm long (e) mild steel suspenders duly fabricated @ 605mm C/C 4mm dia & 600mm long average with the 4mm thick GI suspender in ceiling and applying two coats of distemper oil emulsion complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, including, Nanital or similar pattern roof coverings complete all as specified.

Dismantling of floor hearth and wall tiling including cement mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge

M&L dark shade coloured Vitrified Ceramic tiles 10 mm thick (square/rectangular), area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15 mm thick screed bed in cement mostar 1:4 complete all as specified and directed.

S&F Glazed ceramic coloured tiles of size 450x350x7mm thick,as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match with existing fixed on wall, laid over & including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&Lfor grinding existing old surface / cutting and treating the surface with beeswax polish complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (Below or above GL)

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each complete all as specified and directed.

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadings screws etc. complete all as specified and directed.

Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&l 12mm thick prelamineted partical exterior grade prelamineted on both side with dercoretiv choiss lamination fixed in aluminium frame works complete all as specified and directed.

75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing finishing the surface without extra cement even and smooth

Supply and fix in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI bases corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading fixed with self tapping screw all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture such as switches, sockets, ceiling rose,pendent holders,regulators,light fittings any type removing materials to store in safe custody or for credite etc, and making good the disturbed surface of walls and floors etc as directed.

M&L for point wiring with two single core PVC insulated & PVC unsheathed FRLS multi stranded copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including making good the distrubed surfaces of wall with colour washing/ distemparing the surface to match the existing including PVC concealed conduict of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC unsheathed FRLS multi stranded copper conductor cable of size 1.5 Sqmm 1100 Volts grade as earth continuity connected to common earth dolly, switch board complete with MS rectangular type box heavy duty not less than 1.6 mm thick of suitable size duly inside & outside painted with two coats of synthetic enamel paint over a coat of red oxide primer with top cover 3 mm thick of plastic laminated sheet of reqd colour for mounting the switch socket etc complete as specified for One light/Fan point controlled by one 5 Amps switch one way complete. Make of Cable :- Havells/ Plaza/Finolex/Polycab. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

All as per item No 56 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch on independent board with cable 1.5 sqmm.

All as per item No.56 but with two single core PVC insulated & PVC unsheathed copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated &PVC unsheathed multi stranded FRLS copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor including concealed conduict of size 20 to 25 mm with all accessories for 3 pin/5 pin Amps socket point on independent board complete all as specified and as directed. Make of Cable :- Havells/ Plaza/Finolex/Polycab. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F switch piano flush type 6 Amp. AC, 240 Volts one way all as directed. Make :- Anchor / Havells/ Legrand

S&F switch piano flush type 15 Amp, AC 240 volts one way all as directed. Make- Anchor/Havells/Legrand

S&F socket outlet flush type 2 in one 3 pin 5 Amp. AC 230 volts complete all as directed. Make- Anchor/Havells/Legrand

S&F socket outlet flush type 2 in one 3 pin 15 Amp. AC 230 volts complete all as directed. Make- Anchor/Havells/Legrand

S&F Sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Metallic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/L&T/Seimens

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed FRLS multi stranded copper conductor cable of size 6 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic surface conduit of 25 mm dia on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable 6 sqmm and one run of earth wire 6 sqmm will be measured as one length and conduit & its accessories is deemed to be included in the unit rate). Make of Cable :- RR Kable/Finolex/RPG (Asian)/L&T, Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F in repair square recessed / surface/suspended mounting LED ceiling light with extruded metallic housing CRCA powder coated body, PF> 0.9, THD < 10% and milky diffuser of 3500 lm, 38 W 2'X 2' panel LED driver 240 V ,50 Hz complete all as specified & directed. Make :- Philips/Havells/GE

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating complete all as directed.Make :- Legrand / GE / Seimens/L&T

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Legrand / GE / Seimens/L&T

S&F Isolator SPN 63 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as directed.Make :- Legrand / GE / Seimens/L&T

S&F decorative box type fitting with blue colour end cap for LED tube 16 to 22 watt luminaire for 230 volt AC including LED tube 16 watt to 22 watt complete all as specified. Make- Havells/Philips/GE

Industrial Traders

LUCKY BUILDERS

Ainisi Co.

M/s A S Associates

M/S PRATAP BUILDERS

H C CONSTRUCTION