Item 1 Strengthening of Ganga Marg and Service Lane 60 M wide Chainaige from 0 M to 1600 M Zone I at Indira Gandhi Nagar Jaipur

Amount

Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Mechanical Means

Water bound macadam road (average thickness 100 mm)

bituminous road (average thickness 300 mm)

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per MoRTH Specification Clause 202. Dry Brick Pitching or Brick Soling or interlocking tile

Plant mix method Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Specification Clause 401. For Grading I Material

Supply of high intensity retro relfecting type XI class C sign plate made out of 2mm thick aluminum sheet face to be fully covered with blue/green high intensity grade recto reflective sheet and logo/letters, boarder made of similar type of white sheeting after anodizing treatment of aluminum sheet. the back side is to be painted with epoxy gray paint. the plate is to be fix on 40X40X5 mm angle iron frame with the help of aluminum rebates

Supply and fixing of L type bollard made out of 1.25 mm thick M S sheet height 1.34 M welded in circular type ring section having upper dia 15 cm and lower dia 21 cm with another attachment of 15X 15 cm circular section 15 cm face plate and holdfast at bottom, whole body is processed in white stoving enemaland red reflective 3 bends each of 7.5 cm end one reflective sheet of dia provided to it. Fixing including exacavation and laying cement concrete (1:3:6) of size 45X45X30 cm in foundation & curing, complete in all respect.

Providing and fixing bus shelter(Made with SS Grade 304 Column SS Grade 304 Rafter, SS Grade 304 Purlin,Roof sheet- Polycarbonate Board SS sheet SS Grade 304 Frame for Advertisment Board and Bus shelter logo.) A) various member of materials shall be austenitic stainless steel of the grade 1.40301(widely know as 304 ) it shall contain 17 -18% chromium and 8-11% nickel(as per the specification) complete in all respects and to the entire satisfaction of the engineer in charge. B). heavy duty SS prefabricated dust bins with canopy and two point support grouted in cement mortar and finishe as per floor finish C) Holding down anchor bolts – 20mm dia 350mm long with bolt head and top, 75mm threaded portion with nut and washers for balancing and anchoring. D) 5-walled , 10 mm thick Polycarbonate Multiwall sheet Bronze color having a light transmission of 37 %,with a U-value of 2.39 W/m2k Lexan. Thermoclear Multiwall sheet LT2UV105R175 from SABIC Innovative Plastics or Equivalent. fixing of the 10 mm sheet to be done with profiles having EPDM / silicon . Aluminium profiles need to use and front and rear of polycarbonate sheet has to be closed by aluminium profile. E) aluminium frame signage made of 6063-T5 Alumium framed with section weight 3.80 to 4.00 kg/m with minimum tensile strength of at least 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with the internal support frame at rear completly sealed with the help of silicon or EPDM to make it dust and water proof.Should have the in built STRONG clipping & frame arrangement for holding the flex or digital media along with all necessary cleats and corner joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can Resist theft.The aluminium frame should have polyester powder coating with minimum thickness of 60 micron. The signage should have in built arrangement of mounting it with the bus shelter structure.all complete work as per drawing & design and direction by engineer incharge. E) aluminium frame signage made of 6063-T5 Alumium framed with section weight 3.80 to 4.00 kg/m with minimum tensile strength of at least 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with the internal support frame at rear completly sealed with the help of silicon or EPDM to make it dust and water proof.Should have the in built STRONG clipping & frame arrangement for holding the flex or digital media along with all necessary cleats and corner joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can Resist theft.The aluminium frame should have polyester powder coating with minimum thickness of 60 micron. The signage should have in built arrangement of mounting it with the bus shelter structure.all complete work as per drawing & design and direction by engineer incharge.

Bidder Name

Amount

R M Constructions(GSTN-08AAUPK1964D1ZG)