Loading…
Loading…
Tender Value
₹3.5 L
EMD Value
₹3,500
Closing Date
7 Oct 2026, 10:00 am
Executive Engineer, WRD
O/O Executive Engineer,WRD,Chittar Basin Division,Tenkasi@Kudiyiruppu
Special Repairs
2026_WRD_706673_1
02(19)/CBD/TSI/2026-2027
Open Tender
Civil Works - Water Works
Lump-sum
180 days
Ilanji
Please refer tender document
7 documents required · 7 mandatory
₹0
₹3,500
22 Sept 2026
22 Sept 2026
7 Oct 2026
22 Sept 2026
7 Oct 2026
22 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 6mm thick mild steel plate and stiffened with 50x50mm mild steel angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. | 2.25 | Sqm | - | - |
| 2 | Fabricating, Supplying and fixing of Top Beam made up of 150x75mm (ISMB 150 mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 16mm mild steel plate of size 0.20x 0.30m 2 Nos with required holes.Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent in correct position including dismantling the existing eroded top beam, conveying and stacking and the section stores. The top beam should be painted with two coats of AC black paint over one coat of Red Oxide primer. The Rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty for 5 years etc.., complete. | 3 | RM | - | - |
| 3 | Earthwork deploying earth moving machineries for desilting channel and forming bund on either sides and depositing the earth on banks including jungle clearance etc. complete. having width of 3m - 10m. | 2,390 | Cum | - | - |
| 4 | GST 18% | - | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
TDNINETEEN.pdf
Tender Documents • 0.60 MB
BOQ_849342.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .