SPECIAL REPAIR TO BUILDING No T-45 (BC) OF 619 (I) AD BDE CAMP, T-168 OF 4015 FD HOSPITAL, AND OTM ACCN TR-47 OF AD REGT AT OLD AIR FIELD SRINAGAR UNDER GE 970 EWS

Amount

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area exc 1.5 Sqm but n. exc 4 sqm each for doors and windows complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Chage.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Chage.

S&F Butt hinges, extruded aluminium with galvanised mild steel hinge pin, anodised and fixed, type B-11, 75mm long complete all as specified.

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection / hard standing and finished the surfaces even and smooth with out using extra cement all as directed by Engineer in charge.

M&L non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) and over laid 25mm thick sub base type B-0, 1:2:4 used 12.5mm graded aggregate complete all as specified and directed by Engr-in-Charge

M&L glazed ceramic coloured as required pattern (dark & light shade combination) tiles in 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer in Charge.

M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded Aggregate for foundation and mass concrete complete all as directed by Engr in charge

Material & labour for providing PCC 1:2:4 type B1 (20mm graded aggregate) in coaping and benching inside manholes complete all as specified and directed by Engineer in Charge.

Material & labour for salt glazed stone ware drain pipe Grade-A 150mm bore laid in trenches, jointed and tested as per IS-651-1980 complete all as specified and as directed.

Material & labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed 150mm bore pipes including packing under and haunching against the pipes after they are laid and tested complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:6 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Dismantling staging framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S/F compound girders staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to FE - 410 W(Gde E-250) Quality B complete all as specified and directed.

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests with CI trap of suitable size ( P or S type) , connection to trap, flushing pipe & anti -syphonage pipe with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, closed pattern with recessed bottom cover and mild steel chromium plated hinge all as specified and directed. etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs stop valve (half turn) fancy type chromium plated 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, complete all as specified and directed.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair brass Chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by the Engr-in-Charge.

Supply & fix PVC (SWR) 75mm bore multi floor trap plain with grating including jointing with waste pipe with solvent cement complete all as specified and directed.

Supply & fix wash hand basin vitreous china white, flat back, size 450 x 300 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore 90cm long, including chinaware pedestal for waste pipe, connection to water tubing, PVC connection 15mm dia with brass check nuts incl CP 15mm brass centre hole mixture complete all as specified.

Supply & fix in repairs pillar taps cast copper alloy with capstan heads, chromium plated, fancy type 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia, in any length , single socketed, jointed with rubber ring joints, laid in trenches/ floors complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia, in any length , single socketed, jointed with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) junction single,75mm bore (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 20mm dia for iron pipe and fixed all as specified.

Supply & fix in repairs ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified

M&L for preparation of new steel and iron surfaces of any description, over 10 cm width or girth , and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of old plastered surface of walls and applying one coat of white wash on plastered and other surfaces including brooming down or steel wire bruhing, scraping down smoke soot, moulds, moss, efflorescent salts, trading oil and greesy spots complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 cm girth or width not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces of walls and applying two coats of cement base complete all as directed by Engineer in charge.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity 1000 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed by Engr-in-Charge.

S&F 0.80 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified & directed.

Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 20mm thick in cement mortar (1:6) complete all as specified and directed. Note - Kota stone for step shall be in single piece.

Material & labour for 16-20mm thick machine cut kota stone slab as in vertical surfaces such as dado/ skirting/pillars/risers of stair case etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including rendering 10mm thick in cement mortar (1:3) complete all as specified and directed. Note - Kota stone for risers of step shall be in single piece.

S&F 12mm thick Gypsum board fixed in false ceiling grid made with anodized GI powder coated frame work with 605mm x 605mm size snap gird fixed with screws / staples and hangers 4 mm dia. G.I. wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

Material & labour for cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed.

Supply & fix pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of zinc chromate / red oxide primer including providing PCC 1:3:6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.

Supply and fix 40mm thick flush shutters, solid core construction, with block bopard core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CESZ/TD-1018/2011 sheet no 1/3

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated prepared to receive glass, gauge etc. (sash bars as required) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc. Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed by Engr-in-Charge.

S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Supply & fix 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F in repair 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 200 mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

Supply & fix 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper any colour over a coat of wall care putty thickness 3mm with rubbing or smoothing of surface upto true finish over a coat of water base primer complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

Dismantling staging unframed timber scantlings 40 sq. cm and over in section including trusses, in any position complete all as specified and directed.

M&L Second class hard-wood in scantlings timber framed and fixed complete all as specified and directed.

Refixing of timber scantling obtained from dismanteling from item no. 75 above complete all as specified and directed.

Preparing surfaces apply creosote in wood and wood based materials, new or old, of any description and girth, not otherwise described and treated complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed by Engr-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.completed all as specified and directed by Engr-in-Charge.

Supply and fix MS work as in angle, joist, channel or tee sections fixed independently,without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410W (E-250) incl a shop coat of red oxide complete all as specified and directed.

Material & labour for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Material & labour for 60mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over 25mm thick dry sand cushioning including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in partition wall/cupboards including dismanteling boarding any description and fixed in any position all as specified and directed by Engr-in-Charge.

S&F 0.9mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per marker's instructions complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets in square, rectangular or triangular in section, clean sawn secured with nails or brads sectional area exc 13sq cm & n exc 25 sq cm, including two coats of french polish complete all as specified and as directed.

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Material & labour for cutting holes into or through brick walls superfacial area n.exc. 150 sqcm bult in cement mortar or cement lime mortar and making good in c.m 1:3 or cement concrete 1:2:4 type B-1 including matching the surfaces with the existing surface finishes complete all as specified and directed.

Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

M&L for 2nd class hard wood weather boarding of eave boards, wrought both side, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps in repair complete all as specified and directed.

M&L in repar for 2nd class hard wood weather boarding, for internal walls,clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps in repair complete all as specified and directed.

Material & labour for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in floor finished even & smooth witout using extra cement complete all as specified & directed.

M&L for glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick & removing the surplus spoil at adistance exc. 50m & not exc. 100m complete all as specified and directed.

Supply and fix mild steel rolled section as in roof trusses (framed), trussed, purlins, crane grantries, rails and fastening and heavy brackets framing (Beam, tee, channel or flat section) incluidng distance pieces cleats etc conforming to Fe-410. Gde-E-250 including all as specified and directed.

Supply and fix mild steel work in tubular trusses/purlins /rafters including provn of new nut bolts special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240 complete all as specified and directed.

Supply and fix plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc conforming to Fe 410-W (Gde E-250) quality - B complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm but not exc 15cm long and dia of neck 16 to 20mm complete all as specified and directed.

M&L for complete removal of existing treatment of any layer with and uncl preparing old plastered or unplastered surfaces on walls and applying two coats of white wash on old decorated surface complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment of any layer with and uncl preparing old plastered or unplastered surfaces on walls and applying two coats of colour wash on old decorated surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new painted wooden or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel complete all as specified and directed by Engr-in-Charge.

S&F for anodised power coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr in charge.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

S&F for mortice lock, vertical type, size 100 mm brass 4 lever complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed by Engr-in-Charge.

Supply & fix door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified.

Supply and fix 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Solar control film 50 micron reflective type sticked to glass panes exc 1.5sqm as per instructions of manufacturers

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismanteling wall boarding any description and fixed in any position all as specified and directed.

Supply and fix for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed by Engr-in-Charge.

M&L vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including over 15mm thick screed bed in CM 1:4 and over laid 25mm thick sub base type B-0, 1:2:4 used 12.5mm graded aggregate complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing aluminium/copper point wiring for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down old and unserviceable, distribution board/main switch of any type including fuses, MCBs etc after removing all connections and making good the disturbed surface all as directed by Engr-in-charge

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC casing caping/conduit of suitable size bore (ISI marked) and accessories fixed on surface, terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed. complete all as specified.

All as per description of srl item No 118 here-in-before but 5 Amp socket outlet on independent board.

All as per description of srl item No 118 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 1.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.

Supply and fix in repairs sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 12 way SPN 240 volts complete all as specified and directed.

Supply and fix in repair MCB SP 6 to 30 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix in repair MCB SPN 63 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix in repair MCB TPN 16 to 32 Amp, 240 volts, complete all as specified and directed.

Supply and fix in repair switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .

Supply and fix Switch socket combination 2 in 1, 5 Amps 240 V AC flush type universal, complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as directed and specified by Engr-in-Charge.

Supply and fix Ceiling rose, 2/3 terminals PVC all as specified and directed

Supply and fix in repairs 1X18/20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. make : BAJAJ Cat part No : 112410BCLSB 18NW or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI strip 32mm x 6mm by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 40mm bore of GI pipe light grade with funnel and wire mesh and 50mm bore GI pipe light grade for protection of GI strip 32mmx6mm from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 25x25x3mm complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit

Supply and fix in repairs bulk head fitting 1x10 watt IP-65 surface mounted LED luminaire comprising of high brightness LED with clear or opal acylic cover complete all as specified and directed. Note: (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and fix for Recess mounting LED troffer type fitting 1X36 watts while powder coated CRCA housing with LEDs seamless front frame with flate white high transmission acrylic cover 220 volts complete all as specified and directed. make : CG Cat part No : BZRQL 36WGZ1WH or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and Fix in repair of LED Based Energy saving & environmental friendly long life versatile flood light Lumos IP-65 60 W with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion suitable for mounting bracket complete with all accessories including lamp and 2 core copper connecting cable of size 1.5 sqmm from junction box to light fitting (Approx 7 Mtr) complete and fixed on existing pole bracket all as specified and as directed. Make : Bajaj Cat No BARFEG 60W LED or equivalent make as given in appendix 'E' of contract.

Supply and fix Lamp holder insulated body with Back plate for batton/angular fittings including LED lamp 9 Watt all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Material & labour for sand filling under floors, paver blocks, before laying of cable and after laying of cable in trenches or in foundation including watering and consolidation complete all as specified and directed.

M/L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

Supply and laying, of XLPE under ground insulated,,armoured,heavy duty LT 1100 volts 10 Sqmm 4 core grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle including taking down old unserviceable complete all as directed all as specified and directed by Engr-in-Charge.

Supply and fix or laying in trenches / on wall / poles / structures GI tubing size 50mm dia light grade for road crossing for cable protection / hanging of ceiling fans including necessary suitable size MS flat fixing clamps, fixing screws complete all as directed.

M/S maqsood enterprises

M/S Sultan Enterprises

M/S GHULAM HASSAN KUCHAY