Restoration of rain damages on Repoh Kadap Sandhari Gondpur road Km 000 to 9100 SH Co 6 mtr span RCC Culvert at RD 7100 to providing and laying of GSB WMM and Metalling Tarring at RD 7100 to 7350 Under PDNA2023

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per CPWD specifications 2019 complete and direction of Engineer-in- charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi , royality , Malkhana , toll tax, goods service tax , labour cess or other taxes imposed by the Govt.

Providing and laying concrete for plain / reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 and 1203. Plain Cement Concrete grade M-10 (M-ten) nominal mix 1:3:6 as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing and laying concrete for plain / reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 and 1203. Plain Cement Concrete grade M-20 (M-twenty) nominal mix 1:2:4 as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying concrete for plain / reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807, 1202 and 1204. Reinforced cement concrete grade M-20 (M-twenty) nominal mix 1:2:4 as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete in super structure complete as per drawing and technical specification Clause 800, 1205.4 and 1205.5 Reinforced Cement Concrete grade M-25 ( M twenty five) 1: 1 ½ : 3 ( one cement : one and half sand : three graded crushed stone aggregate ) 20mm ( twenty millimetres) nominal mix as per direction of Engineer-in-charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete wearing course M 30 (M-thirty) grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in superstructure complete as per drawing and technical specifications Clauses 1002, 1005, 1010 and 1202 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto all heights as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Back filling with granular material behind abutment, wing wall and return wall complete as per drawing technical specification clause 1204.3.8 as per direction of Engineer-in-Charge including cost of centering, shuttering, carriage of materials /machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (six hundred millimetres) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 including carriage of materials/machinery required to execute the work in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing weepholes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetres) dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) (one vertical : twenty horizental) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 as per direction of Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction of R.C.C. railing of M 25 (M-twenty five)grade in cast-in-situ with 20 mm (twenty millimetres) nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm (two thousand millimetres) as per drawing and technical specifications Clauses 800, 900 and 1208.3 and as per the direction of Engineer-in- Charge including carriage of materials within all leads and lifts and other incidental . The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Drainage Spouts complete as per drawings and technical specifications as per the direction of Engineer-in- Charge including carriage of materials within all leads and lifts and other incidental . The rate includes octroi, royality, Malkhana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Preparation and consolidation of sub grade with power road roller of 8 (eight) to 12 (twelve) tonne capacity after excavating earth to an average of 22.5cm (twenty two point five centimeter) depth,dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with any lead as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction of granular sub-base by providing close graded with material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR value-30 mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)specification including premixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paverfinisher in sub-base / base course on well prepared surface and compacting with vibratory roller of 8 (eight) to 10 (ten) tonne capacity to achievethe desired density, complete as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying tack coat with RS-I setting bitumen emulsion nn W.B.M / W.M.M. @ 0.4kg/sqm (at the rate of zero point four kilogram per square meter) using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom s per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying tack coat with RS-I setting bitumen emulsion on bituminous surface @ 0.25kg/sqm (at the rate of zero point two five kilogram per square meter) using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom s per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

2 cm (two centimeter) premix carpet surfacing with 1.8 cum (one point eight cubic meter) and 0.90 cum (zero point nine zero cubic meter of stone chippings of 13.2 mm (thirteen point two millimeter) size and 11.2 mm (elevel point two millimeter) size respectively per 100 sqm (one hundred square meter) and 52 kg (fifty two kilogram) and 56 kg (fifty six kilogram) of hot bitumen per cum of stone chippings of 13.2 mm (thirteen point two millimeter) and 11.2 mm (eleven point two millimeter) size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 (six) to 9(nine) tonne capacity etc. complete (tack coat to be paid for separately) with paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt as per CPWD specification 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg (one hundred twenty eighty kilogram)of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum (zero point six zero cubic meter) of fine aggregate per 100 sqm (one hundred square meter) of road surface, including rolling and finishing with road roller all complete as per CPWD specification 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Please Enable Macros to View BoQ information