Conversion of LT OH line into underground cables and replacement of Unserviceable security lights into LED lights in KPR of SQAE and Repair/Replacement of unserviceable old conventional light fittings to LED light fitting at office complex, DSC line

Amount

Dismantling Steel pole / strut any size and transporting to store

Dismantling cross arms of MS cahnnel or angle sections etc complete and setting for reuse or tpt to store

Disamntling insulators any type any size

Dismantling stay assembly complete ( demolition of concrete and excavation to be measured and paid separately)

Dismatling earth wire or copper conductor , service feedre or distribution span

Dismantling of ACSR or AAC conductor

Dismantling and taking down FTL single/ double of any wattage or or size or street light fitting any wattage.

Supply & erecting steel tubular swaged type pole confirming to IS specification complete with base plate, welded top cap over all vertical length 9 mtr type 410-SP-31 including painted of two coats of red oxide primer out side and internally black bituminous paint through out and externally painting of one coat with aluminium painting, including provision of black and white strip width & height of strip as ordered by Engr-in-Charge on poles up to 1.5 m tr high above coping level and numbering of poles what size of numbers & colour all as specified.

Supply and lay and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sq mm 3.5 core layed in trenches, passing through floor/walls, passing through GI pipe under road cutting etc complete all as specified and directed by Engr-in-charge.

All as per item No. 9 but of size 70 sq mm 3.5 core

All as per item No. 9 but of size 50 sq mm 3.5 core

All as per item No. 9 but of size 35 sq mm 4 core

All as per item No. 9 above but of size 16 sq mm 4 core

All as per item No. 9 but of size 10 sqmm 2 core

All as per item No. 9 but of size 6 sq mm 2 core, Note for Ser No. 9 to 15 Make of cable shall be Havells/Polycab/Grandlay

Demolition of cement concrete of any description for laying of pipes/cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Providing PCC work will be measured and paid separately under relevant items.

Material and labour for cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) incl form work

Material and labour for cement concrete in foundations, filling and mass concrete Type D2 1:2:4 (40 mm graded aggregate) incl form work.

M & L for Horizontal drilling hole at a depth upto 1 mtr below the normal ground level of suitable size to insert pipe upto 40-80 mm dia across the road across the horizontal position at different location complete all as specified and as directed.

M & L for 40 mm bore GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and as directed.

All as per item no 20 but 50 mm bore

All as per item no 20 but 80 mm bore, Note for Ser No.20 to 22 : Make of GI Pipe shall be TATA/Jindal or its equivalent as approved by GE

Excavation in trenches in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for pipes and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushing to U/G cable in layers of 23cm thick(8cm before laying the cable and 15cm thick after laying the cable) in trenches including watering and cosolidation, complete all as specified and directed.

Supply and laying reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150 mm x 40 mm. Make shall be Mehtab tiles (Indore)or any other makes approved by GE (ISI marked) IS : 5820

Supply and fixing in repairs TPN DB's 4 way vertical type 415 V, double door suitable for housing of 100 Amps MCCB as main incoming. Make: ABB/Legrand/Schnider

Supply and fixing in repairs MCCB 100 Amps, 4 Pole, 16 KA, fixed type, suitable to be fixed in 4 way TPN DB complete all as specified and directed.

S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar

All as per item No. 30 above but of 8 way

All as per item No. 30 above but of 4 way

S & F MCB SP 6-32 Amps, 'C' Series

S & F MCB SP 63 Amps , 'C' Series

S & F MCB SPN 63 Amps , 'C' Series

S & F MCB SP 40 Amps , 'C' Series

S & F MCB SPN 40 Amps , 'C' Series, Note for Ser No. 28 to 37 : Make of TPN/SPN DB's, MCCB's and MCB's shall be IndoAsian/Legrand/L&T

M&L for earthing complete withGI plate electrodes 600x600x6mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 32x6 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering and 40 mm dia light grade for protection of earth strip upto 7.5 mtrs, charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

All as per item No. 38 Above but with earth wire 4 mm dia and 15 mm dia GI pipe light grade for protection upto 7.5 mtrs

M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop as required of size 32x6mm galvanised iron strip as earth continuty lead.

M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop as required of size 4mm dia galvanised iron as earth continuty lead.

Material and labour for providing cable path indicators made out of CI plate 150 mm dia, inscribing ''1.1 KV LT cable" fixed on MS angle iron with minimum two numbers of nut and bolts or rivets. The nuts shall be tack welded with bolts after full tightning. The size of MS angle iron shall be 30 Cm X 30 Cm X 4 mm thick and length of angle iron should be 900 mm above adequate to be ensure minimum planting depth of 600 mm below ground and 300 mm above GL .Bottam end of angle iron should be anchored type to provide better grip and should be mbedded in PCC 1:3:6 with 20mm aggregate block size 200 X 200 X 300 mm MS angle iron shall be painted with one coat of red oxide primer through out length and there after it will be painted with two coat of blue colour enamel paint and bituminous paint in the portion above ground and below ground respectively complete.

Material and labour for coping to street light poles with PCC Type B1, 1:2:4 (20mm graded aggregate incl form work)

S & F pole box for street light dust and vermin proof make Sintex model GSJB 3020 complete with aluminum bus bar 04 nos. of capacity 200 amps on epoxy insulators incl one MCB SP C series 06 amps 10 KA capacity for Security light connection including suitable clamps & suitable size brass chrome plated glands-02 nos at bottom for cable entry and exit complete all as specified and as directed.

Supply, fixing , testing and commissioning of automatic street light switch of capacity 8 KW in single phase using nature switch for automatic switching of street lights based on Lux level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals enclosed in pole / wall mounted enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories as under including taking down street light switch complete all as specified and directed. (i) Contactor rating (AC3) single phase, 50-60 Amps (Make: BCH/L&T/Schneider) (ii) MCB 63 Amps (SP), 10 KA, 240 volts (Make: Schinder/Legrand/ L&T) (iii) NATURE SWITCH-01 (Make: HEALER Model No. Swadeep-02EC8KW1P)

Painting of LT steel pole after removing the exting patchy paint, by scraping and painting pole with one coat of red oxide primer and two coats of aluminum paint all as ditected

Painting of coping of pole with two coats of white wash after prepoaration of surfaces

Supply and fix cable 1.5 Sq mm 1100 V FR HR grade three runs from Pole box to fitting coonector in PVC FR grade conduit 20 mm dia fixed to poles with PVC straps complete all as directed of length 7.5 mtr long

Supply and fixing in repair LED street light 90 Watts, 5700 (K), suitable for primary roads, pressure die cast IP 66 LED complete with suitable size GI pipe medium grade suitable for mounting complete with suitable size of MS clamps, nuts and bolts, PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) etc. complete all as specified and directed. Cat No. LR02-102-XXX-57-XX, Make : Wipro, Cat No : BRTFG 90W LED I of make : Bajaj, Cat No : LHETBXU7PA6J090 of Make : Havells

Supply and fixing LED flood light 150 watts, energy saving, environment friendly, long life, exclusive innovative die-cast IP65 flood light with high power LED, 5700k complete with suitable size of clamps, nuts and bolts complete all as specified and directed by Engr-in-charge. Cat No. LHFPCZBFP46J150 of Make; Havells or equivalent in Wipro/Philips

Supply and fix in repair flood light fitting 200 watts of symmetric beam (narrow beam), energy saving, die cast aluminum non integral IP66, suitable for search light and general purpose lighting complete with provision of suitable size nuts, bolts, clamps and other suitable fixtures to made arrangement that light fitting shall be rotate 360 degree complete all as specified and directed. Make of light fittings shall be Havells, Cat No. JETAVALOURFLS200WLED757MODSYMLTG or equivalent in Wipro/Bajaj/Philips

Supply and fix in repair LED driver assembly control gear box suitable for 200 watts flood light fitting of symmetric beam (narrow beam) complete all as specified and directed. Make shall be Havells, Cat No. LEDDRIVER ASSEMCGBOXVALOUR200WS or equivalent in Wipro/Bajaj/Philips

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting fans etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- (Make of wire shall be : Havells/Polycab/Grandlay and PVC conduit/casing shall be of make : Havells/Polycab/Grandlay a). One light point controlled by one 05 Amps switch.

All All As per item No. 57 above but One light point controlled by Two Nos of 2 way switch 05 Amps.

All As per item No. 57 above butOne fan/Exhaust fan point controlled by one switch.

All As per item No. 57 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All As per item No. 57 above butOne socket out multi pin 5 Amps controlled by one switch on same board.

All As per item No. 57 above One calling bell controlled by one bell push

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- (Make of wire shall be : Havells/Polycab/Grandlay and PVC conduit/casing shall be of make : Havells/Polycab/Grandlay a). One light point controlled by one 05 Amps switch.

All As per item No. 63 above One light point controlled by Two Nos of 2 way switch 05 Amps.

All As per item No. 63 above One fan/Exhaust fan point controlled by one switch.

All As per item No. 63 above One socket out multi pin 5 Amps controlled by one switch on independant board.

All As per item No. 63 above One socket out multi pin 5 Amps controlled by one switch on same board.

All As per item No. 63 above One calling bell controlled by one bell push

All as per item No 63 here in before but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

All as per item No 63 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting not . exc 10 cm girth

All as per item No. 71 above but exc 10 cm but not exc 20 cms girth

S & F switch piano 5 Amps one way

S & F switch piano 5 Amps two way

S & F ceiling rose 2 to 3 terminal backelite

Supply and fix bell push 250V,6 amps

S & F socket 6 Amps multi purpose flush type

S & F socket 2 in one, 5 and 15 Amps flush type

S & F Switch 15 Amps flush type

Supply and fix call bell ding dong type.

Supply and fix regulator electronic type 100 watts 5 step huming free operation

S & F in replacement Industrial socket single pole and enclosure with a two pin and earth plug complete with one single pole MCB 20A

S & F rigid non metalic PVC conduit/ casing caping inclusive fixing accessories for fixing on wall/ceiling/beam of 20mm size

S & F rigid non metalic PVC conduit/ casing and caping inclusive of fixing accessories for fixing on wall/ ceiling of 25mm size

Supply and fix in replcement MCB DB double door type single phase with common earth and neutral bus and 200 amps copper bus bars complet , 240 volts ,08 way Make : IndoAsian/Legrand/L&T

All as per item No. 85 above but 12 way Make : Make : IndoAsian/Legrand/L&T

All as per item No. 85 above but of 4 way Make : IndoAsian/Legrand/L&T

Supply and fixing in repair TPN DB's 8 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming. Make : IndoAsian/Legrand/L&T

All as per item No. 88 above but of 4 way and suitable for housing of 100 A/63 A MCCB as main incoming Make : IndoAsian/Legrand/L&T

S & F MCCB 125 Amps capacity, 4 pole, 25 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and directed. Make : IndoAsian/Legrand/L&T

All as per item No. 90 above but capacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 25 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed. Make IndoAsian/Legrand/L&T

S & F MCB SP 6-32 Amps, 10 KA, 'C' series. Make : IndoAsian/Legrand/L&T

S & F MCB SP 63 Amps, 10 KA, 'C' Series Make : IndoAsian/Legrand/L&T

S & F MCB SPN 63 Amps, 10 KA, 'C' Series Make : IndoAsian/Legrand/L&T

S & F MCB SP 40 Amps, , 10 KA, 'C' Series Make : IndoAsian/Legrand/L&T

S & F MCB SPN 40 Amps, , 10 KA, 'C' Series Make : IndoAsian/Legrand/L&T

Taking down old unserviceable aluminium sub main wiring and S & F sub main wiring for circuit of size 10 sq mm 2 core alongwith earth wire of 10 sq mm single core of FRLS PVC insulated unsheathed cable (FR), 1100 volts grade with multistranded copper conductor, conforming to IS-649, 1100 V grade and drawn through and including PVC non metalic rigid conduit/casing of suitable size and conduit/casing accessories run on surface of wall/ceiling etc and connecting terminal ends of suitable size complete all as specified and directed by Engr-in-Charge. Make : Havells/Polycab/Grandlay

All as per item No. 97 above but with wire 6 sq mm 2 core with 6 sq mm single core as earth continuity Make : Havells/Polycab/Grandlay

All as per item No. 97 above but with wire 4 sq mm 2 core with 4 sq mm single core as earth continuity. Make : Havells/Polycab/Grandlay

All as per item No, 97 above but with wire 2.5 sq mm 2 core with 2.5 sq mm single core as earth continuity. Make : Havells/Polycab/Grandlay

Taking down old unserviceable aluminium sub main wiring, material and labour for sub main wiring complete with 4 runs of 10 sqmm PVC insulated and unsheathed cable with multi stranded copper conductor, conforming to IS-649, 1100 V grade (FR) and drawn through and including PVC non metalic rigid conduit of suitable size and conduit accessories run on surface of wall/ceiling etc and connecting terminal ends including 2 run of 10 sqmm PVC insulated un-sheathed copper conductor cable green colour as contineous earth continuity conductor and connecting to earth dolly complete all as directed. Make : Havells/Polycab/Grandlay

Taking down old unserviceable aluminium sub main wiring, material and labour for sub main wiring complete with 4 runs of 16 sqmm PVC insulated and unsheathed cable with multi stranded copper conductor, conforming to IS-649, 1100 V (FR) grade and drawn through and including PVC non metalic rigid conduit of suitable size and conduit accessories run on surface of wall/ceiling etc and connecting terminal ends including 2 run of 16 sqmm PVC insulated un-sheathed copper conductor cable green colour as contineous earth continuity conductor and connecting to earth dolly complete all as directed. Make : Havells/Polycab/Grandlay

M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 25x 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 40 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I wire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

M & L earth continuity conductor or main earthing lead fixed to wall or battens or recess or chases or buried in ground in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of 4 mm dia size GI wire

All as per item No. 105 above but of size 25x4 mm Gi strip

Supply and fix Plug top 6 A 2 pin, 240 V. Make- Anchor/ Cona/ Leader

Supply and fix Plug top 6 A 3 pin, 240 V. Make- Anchor/ Cona/ Leader

Supply and fix Plug top 16 A 3 pin, 240 V. Make- Anchor/ Cona/ Leader

Supply and fix in repair LED roadway luminaire 25 watts with high power, energy saving and environment friendly long life versatile pressure die cast aluminium IP66 with arcylic cover suitale for pole dia 43 mm max complete all as specified and directed by Engr-in-charge. Cat No. LTESSI25WLED of Make : C&S, Cat No : ENDURAPEARL SL25WLED757SASYTOPC of Make : Havells, , Note : Rate quoted by the contractor deemed to be included any addition/alteration of existing brackets suitable for fixing of light fittings and provision of three core twisted wire 0.75 sq mm from light fittings to ceiling rose as and where required complete all as directed by Engr-in-charge.

Supply and fix in repair pole/building LED flood light 100 Watts complete with sitable clamps nut bolts etc of suitable sizes incl wiring from pole box to Ftg, Cat No. LTEF100WHPLED, Make : C&S, Cat No. JETAIRISFLS100WLED757SYMLTG of Make : Havells

Supply and fixing in repair LED street light 90 Watts, 5700 (K), suitable for primary roads, pressure die cast IP 66 LED complete with suitable size GI pipe medium grade suitable for mounting complete with suitable size of MS clamps, nuts and bolts, PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) etc. complete all as specified and directed. Cat No. LTESS90WLED/LS, Make : C&S, Cat No : ENDURAPEARL MAGNUM SL 90WLED757PASYTOTG of make : Havells,

Supply and fixing in repair LED 36 watts suitable for armstrong/Grid ceiling of size (600 x 600) mm complete connecting to existing ceiling rose with three core flexible wire 0.5 sq mm complete all as specified and directed. Cat No. LTCRP36WLED2X2 of Make : C&S, Cat No. ENDURASLIMPRO PLUS2X2 PLR 28/36WLED 857MOD+LEDDRIVER36V36WS of make Havells.

Supply and fixing in repair LED bollard fitting 8w/9w complete with suitable size of nuts/bolts for fixing arrangement and provision of suitable size PCC foundation for fixing of bollard fitting etc complete all as specified and direction by Engr-in-charge. Cat No. LTGLC9WLED of Make : C&S, Cat No. CONEBL 8WLED857 SSYMTOPC of Make : havells

Supply and fixing in repair surface and wall mounted LED batten 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed. LTDC1220WLED/WD ( LTDC161820WLED + LT4F20WLEDT8/WD) of Make : C&S, Cat No. ENDURA LINEAR NEOBS20WLED830SPCWH of Make : Havells.

Taking down existing fluorescent tube light fitting of any type/any capacity and refixing the same after carry out repairs such as replacement of existing tube rods with LED tube, by pass arrangement of choke etc and replacement of flexible copper three twin core of size 23/0.0076 mm from ceiling rose to connector all as directed by Engr-in-Charge. Note :- LED tube rods will be measured and paid separately.

Supply only LED tube rods 20 watts in existing conventional fittings with by pass the existing electronic/copper ballasts complete all as specified and directed. Cat No. PHOTONULTRA 1213T8SS TL20W LED 865SPC of Make : Havells, Cat No. LT4F20WLEDT8/WD of make C&S.

Supply and fixing in repair LED PL-L 18 watts suitable for fixing in existing conventional fittings with by pass the existing electronic/copper ballast complete all as specified and direced. LL18-181-65PL of Make : Wipro, Cat No. LHLDEJNEML8Z018 of Make : Havells, Cat No. nxt PRO BLL 15W LED 2G11 of Make : Bajaj.

Supply and fixing in repair LED batten 9w with polycarbonate housing and integrated electronic driver complete all as specified and directed. Cat No. LUMILIN EBS9W LED830 SPCWH of Make : Havells, Cat No. LTDC01210WLED/WD of make C&S.

dxsws

S&F Invertor LED bulb 9W, of make Syska/ Philips or equivalent in other makes.

Supply and fix in replacement condensor 2.5 MFD ISI marked suiatble for ceiling fan 1200 mm sweep

Supply and fix in replacement condensor 4 MFD ISI marked suiatble for ceiling fan 1200 mm sweep

Supply and fix in replacement ceiling fan 1200 mm sweep complete with down rod canopy and blades of size 1200 mm sweep,Energy efficient, 5 star rated make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Exhaust fan 300 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Exhaust fan 380 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Exhaust fan 450 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

M/s raj constructions

VEE KAY ENTERPRISES