RequiredExperience with Government
RequiredAnnual Turnover Bid to RA enabled No Cyphenothrin ( 500 liter ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Requirements Constituents The material shall consist of cyphenothrin
Requiredtechnical dissolved in suitable solvent(s) together with emulsifying agent(s) and with or without stabilizers. * Cyphenothrin
Requiredtechnical employed in the formulation of this Yes * 1/6 material shall conform to IS 15978 Description The material shall be a clear
Requiredstable
Requiredpale yellowish homogenous liquid and free from sediment and/or suspended matter. It shall readily form an emulsion
Requiredon dilution with water
Requiredsuitable for spray * Cold Test No turbidity or separation of solid or oily matter
Requiredor both
Requiredshall occur when the material is subjected to the cold test at 10°C as prescribed in 13.1 of IS 6940. * Flash Point (Abel) When determined by the method prescribed in IS 1448 [P: 20]
Requiredthe flash point of the material shall be above 24.5°C. * Emulsion Stability Any separation including creaming at the top and sedimentation at the bottom of 100 ml of emulsion
Requiredprepared in standard hard water with 2.0 ml of EC
Requiredshall not exceed 2.0 ml
Requiredwhen tested by the method prescribed in 13.3 of IS 6940. * Chemical Properties Cyphenothrin Content percent (m/m) Up to 9 (+10/-5) * Acidity "When determined by the method prescribed in 13.5 of IS 6940
Requiredacidity (as H2SO4) of the material shall not be more than 0.5 percent by mass. " * Packing Packing material
Requiredand the container shall also meet the general requirements given in IS 8190 (Part 2) lacquer coated aluminium container * Packing size (in ml) 1000 1000 2/6 The stores shall have to be packed as per Registration Certificate (in 100 ml
Required250 ml
Required500ml
Required1 lit
Required& 5 Iit) in tin container suitable lacquered from inside with teak proof and pilfer proof closure system confirming to IS: 9992-1991 end its subsequent amendment thereof
Requiredif any YES * A leaflet as approved by the Registration Committee should be affixed to the packaging containing insecticide/adulticide and shall be printed in English
RequiredHindi &
Requiredin regional languages indicating product detail
Requireddirection for use
Requiredprecautions
Requiredsymptoms of poisoning and first aid with anadote
Requireddisposal of used containers
Requiredstorage conditions and manufacturer's name etc YES * Marking The containers shall be securely closed and the following information shall be marked legibly and indelibly on each container in addition to any other information as is necessary under the Insecticides Act
Required1968 and Rules framed thereunder: a) Name of the material; b) Name and address of the manufacturer; c) Batch number; d) Date of manufacture; e) Date of expiry; f) Net quantity; g) Nominal cyphenothrin content
Requiredpercent (m/m); h) Cautionary notice worded as in the Insecticides Act
Required1968 yes * 3/6 and Rules framed thereunder; and j) Any other information required under the Standards of Weights and Measures (Packaged Commodities) Rules
Required1977 The containers may also be marked with the ISI Certification Mark yes * "In addition
Requiredthe container shall be marked with GOVERNMENT OF (Name of the State) SUPPLY Name of Buyer organisation ( ) NOT FOR SALE " yes * Shelf Life The expiry date i e the date up to which the insecticide shall retail its efficacy & toxicity shall be for a period of two years from the date of its manufacture that means the material shall meet with the requirements given in the specification at for a period of two years This shall be guaranteed by the firm with a certificate in this regard shall have to be furnished along with the documents At the time when the stores are offered for inspection the life of insecticides should not have passed more than 1/6th of the effective life of the same counted from the date of manufacture YES * Certification Conforming to IS:15979(Latest) Yes * CM/L Number for ISI certification mark (Must declare) - * 4/6 Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification Yes * Test Report to be submitted to the Buyer on Demand write NA if Test report is not available Yes * Registration The product and the firm shall have to be registered by the Registration Committee
RequiredCentral insecticide Board
RequiredDirectorate of Plant Protection & Quarantine
RequiredDepartment of Agriculture
RequiredMinistry
Requiredof Agriculture for Public Health use for adult mosquito control of disease Vectors Yes * Dose and frequency The recommended dose for thermal fogging is 0 point 5 mg a-i/m2 in Indoor conditions and 3 point 5 g a-i/ha in outdoor conditions YES * The State Programme officers have the right to carry out chemical analysis of larvicide from field examples during implementation under the programme at any stage during shelf life of the product YES * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
