SPL REPAIR TO EXTERNAL SURFACE OF RCC LOUVERS CHAJJAS AND PLASTERING WORK ETC AT NORTH WING POST OFFICE BANK SIDE OF CDA PATNA AND BLDG NO P 8 OFFRS SINGLE ACCN BLDG IN NCC DTE AND PROVN OF PAVER BLOCK ADJACENT TO PI LINE AND CERTAIN MINOR WORK

Amount

Note:- 1. The Work to be executed is for repair of louvers etc of CDA building at Rajender Nagar, Patna in patches as per existing aesthetic look of building at height upto 21 Mtr. The Rate quoted are inclusive of working upto 21 m height with required scaffolding and safety measures etc as required/directed at site. 2. TENDERERS ARE ADVISED TO VISIT THE SITE OF WORK BEFORE QUOTING RATES. NO ANY CLAIM SHALL BE ADMISSIBLE AFTER QUOTING OF RATES.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:4 mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note :- Liquid WPC will be measured and paid separately.

M&L for rendering 15 mm thick on fair faces of brick work wall surfaces or concrete surface of wall in cement mortar (1:6) finished surface even and smooth without using extra cement complete all as specified and directed .

M&L for rendering 5 mm thick on concrete surface of ceiling in cement mortar (1:3) fineshed surface even and smooth without using extra cement complete all as specified and directed .

Supply only water proofing compound (liquid), ISI marked complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels as directed finished even and fair coimplete all as specified and as directed.

Demolition of reinforced cement concrete of any description and any position and removing the rubish from the work site complete all as specified and directed.

M&L RCC 1:2:4 type B1, (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note :- Work to be casted & executed in louvers of CDA building at Rajender Nagar, Patna in patches as per existing aesthetic look of building at height upto 21 Mtr.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilvers, shelves inclding supports, overhangs,etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia and over cut to lengths, bent to shape required including cranking bending hooking ends etc and binding with mild steel annealed wire not less than 0.9 mm dia conf to IS-432 complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, including hacking out old broken glass (any thickiness, size or description) from wooden / steel frames omplete all as specified and directed

M&L for preparation of old decorted plastered / unplastered surfaces of walls of any description by washing, rubbing down and stopping of distemper and painted surfaces and applying one coat of Oil Bound distemper, white or tinted complete all as specified and directed.

M&L for preparation of old decorated plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion, white or tinted (change of colour as required) complete all as specified and directed.

M&L for preparation of scrapped surfaces of walls of any description by washing, rubbing down and applying 3 mm one coat of Birla white / JK wall care putty complete as specified and directed.

M&L for preparation of old decorated plastered / unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete as specified and directed.

M&L for preparation of old scrapped surfaces of walls of any description by washing, rubbing down and applying two coats of cement base paint complete as specified and directed.

M&L for preparation of old decorated plastered / unplastered surfaces of external walls of any description by washing, rubbing down and applying one coat of weather coat paint complete as specified and directed.

M&L for new plastered surfaces of external walls of any description and applying one coat of weather coat paint over a coat of primer complete as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M & L for (reebaklens solution) to exposed corroded reinforcement @ 0.20 ltr/Sqm of exposed reinforcement bars/structural members surfaces at any height including scaffolding, complete all as per manufacture's instructions and as specified and directed. Note:- Complete surface area of concrete will be measured in this item.

M & L of applying minimum 40 micron thick (dry film thickness) coat of epoxy zincrich primer (Nitozink) primer of M/s Fosroc chemicals (India) Pvt Ltd/M/s Pidilite/M/s Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height including scaffolding, complete all as per manufacturer's instructions and all as specified and directed. Note:- Complete surface area of concrete will be measured in this item.

M & L providing & fixing at any height including scaffolding, welded mild steel wire mesh weight not less than 4.00 kg per sqm primed with nitozink primer & applying 40 mm average thick cement mortar with 10-15% polymer in the ratio 1:4 mixed with liquid integral water proofing compound nitobond AR manufactured by M/s Fosroc/M/S pidilite/M/S Choksey chemicals in ratio as per recommendation of manufacturer's total chemical not less than 5% by weight of cement complete all as per manufacturer's instructions and all as specified and directed.

Note:- 1. The Work to be executed is for repair of NCC building at Rajender Nagar, Patna in G+2 building. The Rate quoted are inclusive of working upto G+2 height with required scaffolding and safety measures etc as required/directed at site. 2. TENDERERS ARE ADVISED TO VISIT THE SITE OF WORK BEFORE QUOTING RATES. NO ANY CLAIM SHALL BE ADMISSIBLE AFTER QUOTING OF RATES.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L rendering 10mm thick in cement mortar 1:3 on fair face of bricks/concrete surfaces in ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed..

Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of external walls of any description by washing, rubbing down and applying one coat of weather coat paint complete as specified and directed.

~Ditto~ all as per item No 36.00 above but one coat of weather coat paint over a coat of cement primer complete all as specified and as directed.

M & L for two coats of OBD on newly plaster wall surfaces over a coat of primer over and including 3 mm thick Birla / JK Putty complete all as specified and directed.

M & L for two coats of OBD on newly plaster ceiling surfaces over a coat of primer over and including 3 mm thick Birla / JK Putty complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premisses complete all as specified and directed.

M&L for water proofing treatment to toilets slabs including wall with a coat of epoxy coating of make Dr Fixit/Pidilite/Fosroc/Sika as per maufacturer's instruction complete all specified and directed

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

M & L for 450x300 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) including all type of tiling, marble chips, terranzo finish where ever existing complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to recive the floor tiles etc complete all as specified and directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles in floors/skirting, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed. Make : Somany/Johnson/Kajaria/Orient

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection/ flooring etc finishing even & smooth without using extra cement complete all as spd and directed.

Taking down or up 20 mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

Taking down or up 25 mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

Re-fixing old 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item.

Re-fixing old 25 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item.

S & F tubes medium grade galvanised iron with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed.

S & F tubes medium grade galvanised iron with all fittings & fixed complete to walls & ceiling or laid in floors 25mm bore etc complete all as specified and directed.

S & F in repair of 20 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 25 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed

Demolition of reinforment Concrete of any description and in any position not otherwise specifically provided for cement water tank old pattern and stagging and removing exceeding 1.5 KM from NCC/CDA location complete all as directed by Engr-in-Charge

S&F PVC connection 15 mm size with CP nuts of length 450 mm complete all as specified and as directed.

S&F mild steel bands, strap, supports, cantilever brackets as per requirement etc complete all as specified and as directed.

M&L Providing reinforced cement concrete type B1 1:2:4 (12.5 mm graded agg) in Door or window lintel, lintel bends/plinth bend incl necessary formwork complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good the same in cement concrete 1:2:4 type B-0 or cement mortar 1:3 as required, superficial area of cutting not exc. 150 Sqcm complete all as specified and directed

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia. complete all as specified and directed.

~Ditto~ all as per item Ser No 65.00 above but 75 mm bore complete all as specified and directed.

S&F 75 mm dia of PVC (SWR) multi floor trap plain including jointing with solvent cement of outlet complete all as specified and directed.

S&F 75 mm dia of PVC floor trap plain including jointing with solvent cement of outlet complete all as specified and directed.

S & F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S& F PVC(SWR) jnctions single (SingleT) equal or unequal, dia of bore 110 mm complete all as specified and directed by Engr-in-Charge.

PVC (SWR) 'P'/ `S trap bore 110mm/100mm complete all as specified and directed by Engr-in-Charge.

S&F 100 mm CI vent cowl complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 2nd class hard wood (Sal) plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S & F, for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F, powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 0.1.490Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

M & L for 20 mm thick machine cut granite stone slab as in skirting / dado/over RCC slab, laid over cement screed and jointed with grey cement slurry and pointed with white or coloured cement pigment to match over and including 15mm thick on backing coat/screed bed in CM 1:4 complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 375 X 620 X 770 mm coloured/white with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified and directed (Make : Jaquar cat part no CNS WHT 353SPPZ or equivalent of make specified)

S&F wash hand basin size 555 X 425 X 195MM, Oval type and fixing with l fixing in wall/platform complete all as specified and as directed. Make : Jaquar CAT PART - FLS-WHT-5701or equivalent of make specified)

S&F in repair 32 mm dia waste coupling brass chromium plated with PVC waste pipe complete all as specified and as directed.

S&F in repair 15mm bore Pillar cock for wash hand basin with left hand operating knob with 450 long Braided house and fixed complete all as specified and as directed. Make : Jaquar CON -127BKN or equivalent of make specified)

S&F in repair 15 mm bore CP bib tap of fancy type with long shunk with wall flange with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed. Make : Jaquar CON -047KN or equivalent of make specified

S&F in repair CP angle stop cock 15 mm with wall flange complete all as specified and directed. Make : Jaquar CQT-23059 or equivalent of make specified

S&F in repair CP two way angle stop cock 15 mm with wall flange complete all as specified and directed. Make : Jaquar CON-041KN or equivalent of make specified

S&F health faucet of CP head with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. Make : Jaquar ALD-CHR-563 or equivalent of make specified.

S&F flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and as directed.

S&F CP toilet paper holder with flap fixed to wall with CP screws and wooden/plastic cleats complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and as directed.

S&F CP towel rail 600 mm long fixed with & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar ACN - 1111BNM or equivalent of make specified

S&F glass shelf 600mm long including fixed with CP brass screw and wood cleats / rowel plug with wall complete all as specified and as directed. Make : Jaquar CAN-1171N or equivalent of make specified

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar CAN-1121BN or equivalent of make specified

S&F shower rose chromium plated with swivel joints of size 125mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F, Aluminium hinges (ISI marked), medium weight of size 100 mm complete all as directed

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked

S&F Wall Mixer with 115 mm Long Bend Pipe for Connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aeratorr complete all as specified and as directed. Make : Jaquar GP ESSCO DLX-517BKN or equivalent of make specified

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed..

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M&L for Machine Pressed precast glazed colour reflective PCC interlocking paver block 80mm thick mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed by Engr-in-Charge. The pattern of paver block shall be approved by GE and shall be of approved make. Note: Payment of sand cushion shall be measured and paid separately.

M & L PCC 1:2:4 type B1 (using 20mm graded aggregates) as in copings complete all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L two coat of cement base paint over a coat of primer on wall including preparation of newly plastered surfaces.r complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L Preparing new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

S&F urinal with sensor with fixing accessories set size 480x300x740mm including sensotronic sensor flushing valve for urinal with complete kit all as directed by Engr-in-Charge (Make : Jaquar Cat Part No : URS-WHT-13255 or equvalent as approved by GE)

S&F Double Arm wall mounted Reversible plain/Magnifying (X3) pivotal morror complete all as specified and directed. (Make : Jaquar CAN-1193N or equvalent as approved by GE )

M&L for factory made glazed reflective type Pavers (vitrified Exterior type) tiles coloured of size (300x300)x8 mm thickness manufactured using ordinary Portland cement with / without pigment conforming to IS 4457-2007, laid over including 20 mm thick bedding layer in CM 1:4. The side of paver tiles shall be grouted with PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) to make straight line complete. (Make & pattern of paver vitrified exterior tiles shall be as approved by GE) (Make : ORIENT/KAJARIA/SOMANY)

Preparing surface of sunken slab and applying 15 mm thick plaster in cement mortor 1:4 mixed with and including integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement over roof slab etc complete all as specified. (Note : WPC will be measured & paid for separately).

S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S & F mild steel coudiut curtain rod with PVC coating fancy type drapery rod 20mm dia of any clour as approved and fixed with baraket complete all as specified and directed.

S & F, aluminium partition wall with following specification complete all as specified and directed :- (a) Style/Vertical member of size 63.50 x38.10 x85 mm thick weight @ 10.095Kg/RM (b) Horizontal, top, middle and botton member of size 63.50 x 38.10 x 1.95 mm thick weight @ 1.092Kg/RM (c) Partialy 5 to 6 mm thick tinted glass fixing with rubber gasket. (d) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

M&L Point wiring complete with cable PVC, insulated, unsheathed, 1100 volts grade conforming to IS-694, 1.5 Sq mm (nominal area) FRLS stranded with copper conductor single core drawn through and including non metallic rigid PVC conduit 20mm dia,medium grade and conduit accessories concealed wiring systeb by cutting of wall and making good in walls disturbed surface, with sunken type pressed steel/welded MS terminal boxes not less than 1.6mm thick MS Sheet concealed in wall with hold fasts duly painted with two coat of black bituminious paint over a coat of red oxide, 3 mm thick laminated sheet cover for mounting of fittings like switches, socket outlets, regulators etc., including a run of PVC insulated unsheathed 1.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following: -

One light/ fan point controlled by one, one-way switch, SP, 5 Amps complete all as specified & directed.

One 3 pin 5 Amps switch socket out let point on the same board with other switches complete all as specified & directed

S&F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 65 x 50 mm, two to three terminals, complete all as specified & directed.

Supply and fixing double door SPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .Make: Schneider/ Legrand/ L&T / ABB.

M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade PVC-FRLS cable drawn and PVC rigid conduit 20 mm dia concealed in wall with all necessary fittings and accessories and run of PVC-FRLS insulated and unsheathed single core cable with copper conductor of size 2.5 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified. Note:- Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one unit run.

S&F MCB SP of capacity 5 - 40 Amps 240 volts, 10 KA breaking capacity 'C' type incl connection complete all as specified & directed.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size with and including 01 No tube 18/20 watt all as specified. Make of Fitting- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton. Make of tube: Havells Cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent of Bajaj / Philips / Wipro / CG.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louver complete all as specified and as directed

Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. Make : Make: Schneider/ Legrand/ L&T / ABB.

jaglalchoudharyandsons