Loading
Loading…
Loading…
Tender Value
₹5.2 L
EMD Value
₹10,342
Closing Date
5 Aug 2026, 2:00 pm4d left
E.E.C.P.-1
Executive Engineer, C.P. Division No.1, 4th Floor, Deluxe Building Sec 9, Chandigarh
SPECIAL REPAIR FOR RESIDENTIAL BUILDINGS (TYPE I, II, III, IV, V HOUSES) IN THE CAMPUS OF PEC (DEEMED TO BE UNIVERSITY), SECTOR 12, CHANDIGARH FOR THE YEAR 2026-27.
2026_CHD_94358_1
CP1/2026/2895279
Open Tender
Civil Works - Buildings
Percentage
240 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,342
29 Jul 2026
29 Jul 2026
5 Aug 2026
29 Jul 2026
5 Aug 2026
29 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR 8.31) | 15 | sqm | 1,233.72 | ₹18,505.8 |
| 2Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | |||||
| 2.01 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) | 15 | sqm | 2,328.05 | ₹34,920.75 |
| 3Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : (copper oxidized as per IS: 1378) | |||||
| 3.01 | 115 mm (DSR 9.67.2) | 20 | each | 28.9 | ₹578 |
| 4Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||||
| 4.01 | 250x16 mm (DSR 9.96.2) | 20 | each | 253.56 | ₹5,071.2 |
| 5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
| 5.01 | 250x10 mm (DSR 9.97.2) | 20 | each | 112.04 | ₹2,240.8 |
| 6Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.19 MB
BOQ_115755.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].